Lexmark E232 User Manual

 
Using the operator panel
71
Paper jams as it exits the tray into the printer
Paper jams as a printed job exits the printer
Light sequence:
Continue—On
Toner Low/Replace PC Kit—On
Paper Jam—On
What this light sequence means:
A paper jam has occurred as the paper is exiting the paper tray and 
entering the printer.
What you can do:
Clear the paper jam. See “How to clear paper jams” on page 26 
for more information.
Light sequence:
Continue—On
Load Paper—On
Paper Jam—On
What this light sequence...

 
Using the operator panel
72
Paper jam in Tray 1
Paper jam in Tray 2
Light sequence:
Continue—On
Toner Low/Replace PC Kit—On
Load Paper—On
Paper Jam—On
What this light sequence means:
A paper jam has occurred in Tray 1.
What you can do:
Clear the paper jam. See “How to clear paper jams” on page 26 
for more information.
Light sequence:
Continue—On
Ready—On
Load Paper—On
Paper Jam—On
What this light sequence means:
A paper jam has occurred in Tray 2.
What you can do:
Clear the paper jam. See “How...

 
Using the operator panel
73
Complex page
Insufficient printer memory
Light sequence:
Continue—On
Ready—On
Error—On
What this light sequence means:
The page may not print correctly because the print information on the 
page is too complex (that is, too large for the printer’s memory).
What you can do:
Press Continue  to clear the message and continue 
processing the print job (some of the print data may be lost).
To avoid this error in the future: 
–Reduce the complexity of the page by reducing the...

 
Using the operator panel
74
Insufficient collation area
Light sequence:
Continue—On
Toner Low/Replace PC Kit—On
Error—On
What this light sequence means:
The printer memory does not have the free space necessary to 
collate the print job. This may happen due to one of these errors:
Memory is full.
A page is too complex to print.
A page is shorter than the set page margins.
Memory is insufficient to save what is in the buffer.
What you can do:
Press Continue  to clear the message and continue...

 
Using the operator panel
75
Font error
Defective flash
Light sequence:
Continue—On
Toner Low/Replace PC Kit—Blink
Error—On
What this light sequence means:
The printer has received a request for a PPDS font which is not 
installed.
What you can do:
Press and release Cancel to cancel the print job.
Press and hold Cancel  to reset the printer.
Press Continue to clear the message and continue 
printing.
Light sequence:
Continue—On
Load Paper—On
Error—On
What this light sequence means:
The printer...

 
Using the operator panel
76
Insufficient defrag memory
Network interface errors
Light sequence:
Continue—On
Load Paper—Blink
Error—On
What this light sequence means:
The printer has insufficient memory to free unused space in flash 
memory.
What you can do:
Delete fonts, macros, and other data in RAM.
Install additional printer memory.
Light sequence:
Continue—On
Paper Jam—On
Error—On
What this light sequence means:
The printer cannot establish communication with the network.
What you can do:...

 
Using the operator panel
77
Error communicating with the host computer
Host interface disabled
Light sequence:
Continue—On
Paper Jam—Blink
Error—On
What this light sequence means:
The printer has lost the connection to an external print server (also 
called an external network adapter or ENA).
This light sequence is displayed if your printer is connected to the 
network, but it cannot detect the print server when you turn on the 
printer.
What you can do:
Make sure the cable connecting the ENA and...

 
Using the operator panel
78
Memory full
Light sequence:
Continue—On
Ready—On
Toner Low/Replace PC Kit—On
Error—On
What this light sequence means:
The printer is processing data, but the memory used to store pages 
is full.
What you can do:
Press Continue  to clear the message and continue 
printing the job (the job may not print correctly).
Press and release Cancel to cancel the print job.
Press and hold Cancel to reset the printer.
To avoid this error in the future: 
–Simplify the print job....

 
Using the operator panel
79
Short paper
Light sequence:
Continue—On
Ready—On
Load Paper—On
Error—On
What this light sequence means:
The paper length is too short to print the formatted data. This occurs 
when the printer does not know the media size loaded in the tray, or 
there is a problem feeding the media.
What you can do:
Make sure the print media you loaded is large enough.
Open the front cover, clear the paper path and close the cover 
to resume printing (see “How to clear paper jams” on...

 
Using the operator panel
80
Flash full
Light sequence:
Continue—On
Ready—On
Paper Jam—On
Error—On
What this light sequence means:
There is not enough free space in the flash memory to store the data 
you are trying to download.
What you can do:
Delete fonts, macros, and other data stored on the flash 
memory to free up space.
Press Continue to clear the message and continue 
printing. Downloaded fonts and macros not previously stored 
in flash memory are deleted.
Install flash memory with more...