Lexmark E232 User Manual

 
Troubleshooting
121
Blank pagesThe toner cartridge is defective or 
empty.Replace the toner cartridge.
Solid black pages The toner cartridge is defective.
 Your printer requires servicing. Replace the toner cartridge.
 Call for service.
Paper curls badly once it prints 
and exits to the binThe Paper Texture setting is wrong 
for the type of paper or specialty 
media you are using.Change Paper Texture
† from 
Rough to Normal or Smooth.
SymptomCauseSolution
*To replace the fuser, call a service...

 
Troubleshooting
122
How to clean the printhead lens
You can solve some print quality problems by cleaning the printhead lens.
1Turn the printer off.
2Open the front cover by pressing the button on the left side of the printer and lowering the 
cover.
Downloaded From ManualsPrinter.com Manuals 

 
Troubleshooting
123 3
Remove the print cartridge assembly out of the printer by pulling on the toner cartridge 
handle.
Note:Do not press the button on the print cartridge assembly.
Place the print cartridge assembly on a flat, clean surface.
Warning:Do not leave the print cartridge assembly exposed to direct light for an extended 
period of time. Extended light exposure can cause print quality problems.
Downloaded From ManualsPrinter.com Manuals 

 
Troubleshooting
124 4
Locate the glass printhead lens, which is located within the recessed area in the top of the 
printer.
5Gently wipe the printhead lens with a clean, dry, lint-free cloth.
Warning:Not using a clean, dry, lint-free cloth may result in damage to the printhead lens.
6Install the print cartridge assembly into the printer by aligning the green arrows on the guides 
of the print cartridge assembly with the green arrows on the tracks in the printer and pushing 
the print cartridge...

 
Contents
2
Contents
Notices ............................................................................................. 6
Edition notice ..................................................................................................  6
Trademarks ....................................................................................................  6
Licensing notice..............................................................................................  7
Safety information...

 
Index
126
light sequence 62
printing 32
manual feeder 24, 62
memory card 45
menu settings page 94
menus
navigating
advancing in 84
entering 83
exiting 84
returning to Home 
menu 84
scrolling through 84
Network 85
Parallel 86
saving settings 84
Setup 86
USB 87
Utilities 87
messages
See operator panel light 
sequences
Mode 2 (Parallel menu) 86
multiple page printing 34
N
NetWare 102
Network menu 85
network setup page 94
NPA Mode
Network menu 85
Parallel menu 86
USB menu 87
N-up printing 34
O
operator...

 
Index
127
Complex page 73
Defective flash 75
Error communicating with 
the host computer 77
Flash full 80
Font error 75
Host interface disabled 77
Insufficient collation area 74
Insufficient defrag 
memory 76
Insufficient printer 
memory 73
Invalid engine code 81
Invalid network code 82
Memory full 78
Network interface errors 76
Paper jam at the input 
sensor 70
Paper jam in the manual 
feeder 70
Paper jam in Tray 1 72
Paper jam in Tray 2 72
Paper jams as a printed job 
exits the tray 71
Paper jams as...