Home > Lexmark > Printer > Lexmark C935hdn User Manual

Lexmark C935hdn User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lexmark C935hdn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Menu itemDescription
    Print Resolution
    2400 IQSpecifies the printed output resolution
    Note: 2400 IQ is the factory default setting.
    Toner Darkness
    1–5Lightens or darkens the printed output
    Notes:
    4 is the factory default setting.
    Selecting a smaller number can help conserve toner.
    If Print Mode is set to Black Only, a setting of 5 increases toner density and
    darkness to all print jobs.
    If Print Mode is set to Color, a setting of 5 is the same as a setting of 4.
    Color Saver
    On
    OffReduces the amount of toner used for graphics and images. The amount of toner used
    for text is not reduced.
    Notes:
    Off is the factory default setting.
    On overrides Toner Darkness settings.
    RGB Brightness
    ‑6–6Adjusts brightness in color outputs
    Notes:
    0 is the factory default setting.
    ‑6 is the maximum decrease. 6 is the maximum increase.
    This does not affect files where CMYK color specifications are being used.
    RGB Contrast
    0–5Adjusts contrast in color outputs
    Notes:
    0 is the factory default setting.
    This does not affect files where CMYK color specifications are being used.
    RGB Saturation
    0–5Adjusts saturation in color outputs
    Notes:
    0 is the factory default setting.
    This does not affect files where CMYK color specifications are being used.
    Color Balance
    Cyan
    ‑5–5
    Magenta
    ‑5–5
    Yellow
    ‑5–5
    Black
    ‑5–5Adjusts color in printed output by increasing or decreasing the amount of toner being
    used for each color
    Note: 0 is the factory default setting.
    Color Balance
    Reset DefaultsRestores the Color Balance factory default settings
    Understanding printer menus91
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Menu itemDescription
    Color Samples
    sRGB Display
    sRGB Vivid
    Display—True Black
    Vivid
    Off—RGB
    US CMYK
    Euro CMYK
    Vivid CMYK
    Off—CMYKPrints sample pages for each of the RGB and CMYK color conversion tables used in the
    printer
    Notes:
    Selecting any setting prints the sample.
    Color samples consist of a series of colored boxes along with the RGB or CMYK
    combination that creates the color observed. These pages can be used to help
    decide which combinations to use to get the desired printed output.
    From a browser window, type the IP address of the printer to access a complete
    list of color sample pages from the Embedded Web Server.
    Manual Color
    RGB Image
    Vivid
    sRGB Display
    Display—True Black
    sRGB Vivid
    Off
    RGB Text
    Vivid
    sRGB Display
    Display—True Black
    sRGB Vivid
    Off
    RGB Graphics
    Vivid
    sRGB Display
    Display—True Black
    sRGB Vivid
    OffCustomizes the RGB color conversions
    Notes:
    sRGB Display is the factory default setting for RGB Image. This applies a color
    conversion table to an output that matches the colors displayed on a computer
    monitor.
    sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. sRGB
    Vivid applies a color table that increases saturation. This is preferred for business
    graphics and text.
    Vivid applies a color conversion table that produces brighter, more saturated
    colors.
    Display—True Black applies a color conversion table that uses only black toner
    for neutral gray colors.
    Off turns off color conversion.
    Understanding printer menus92
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Menu itemDescription
    Manual Color
    CMYK Image
    US CMYK
    Euro CMYK
    Vivid CMYK
    Off
    CMYK Text
    US CMYK
    Euro CMYK
    Vivid CMYK
    Off
    CMYK Graphics
    US CMYK
    Euro CMYK
    Vivid CMYK
    OffCustomizes the CMYK color conversions
    Notes:
    US CMYK is the US factory default setting. US CMYK applies a color conversion
    table that tries to produce output that matches SWOP color output.
    Euro CMYK is the international factory default setting. Euro CMYK applies a color
    conversion table that tries to produce output that matches EuroScale color
    output.
    Vivid CMYK increases color saturation for the US CMYK color conversion table.
    Off turns off color conversion.
    Enhance Fine Lines
    Enables a print mode preferable for files such as architectural drawings, maps, electrical
    circuit diagrams, and flow charts
    Notes:
    Enhance Fine Lines is not available from the control panel menus.
    To set Enhance Fine Lines from the software program, with a document open,
    click File > Print, and then click Properties, Preferences, Options, or Setup.
    To set Enhance Fine Lines using the Embedded Web Server, type the network
    printer IP address in a browser window.
    Utilities menu
    Menu itemDescription
    Factory Defaults
    Do Not Restore
    RestoreReturns the printer settings to the factory default settings
    Notes:
    Do Not Restore is the factory default setting. Do Not Restore keeps the
    user‑defined settings.
    All printer settings are returned to factory default settings except Display
    Language and the settings in the Parallel menu, Serial menu, Network menu,
    and USB menu.
    All downloads stored in RAM are deleted. Downloads stored in flash memory
    or on the printer hard disk are not affected.
    Understanding printer menus93
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Menu itemDescription
    Remove Held Jobs
    Confidential
    Held
    Not Restored
    AllRemoves confidential and held jobs from the printer hard disk
    Notes:
    Selecting a setting affects only print jobs that are resident in the printer.
    Bookmarks, jobs on USB flash memory devices, and other types of held jobs
    are not affected
    Selecting Not Restored removes all Print and Hold jobs that were not restored
    from the disk.
    Format Flash
    No
    YesFormats the flash memory. Flash memory refers to the memory added by installing
    a flash memory option card in the printer.
    Warning—Potential Damage: Do not turn off the printer while the flash memory is
    formatting.
    Notes:
    A flash memory option card must be installed in the printer and operating
    properly for this menu item to be available.
    No cancels the format request.
    Selecting Yes deletes all data stored in flash memory.
    Defragment Flash
    No
    YesPrepares the flash memory to receive new data by retrieving lost storage space
    Warning—Potential Damage: Do not turn off the printer while the flash memory is
    defragmenting.
    Notes:
    A flash memory option card must be installed in the printer and operating
    properly for this menu item to be available. The flash memory option card
    must not be Read/Write or Write protected.
    No cancels the defragment request.
    Selecting Yes reformats the flash memory after transferring all downloads to
    regular printer memory. When formatting is complete, the downloads are
    loaded back into flash memory.
    Format Disk
    No
    YesFormats the printer hard disk
    Notes:
    A printer hard disk must be installed in the printer and operating properly for
    this menu item to be available. The disk must not be Read/Write or Write
    protected.
    No cancels the format request.
    Selecting Yes deletes all stored data and reformats the printer hard disk.
    Wipe Disk (secure)
    No
    YesFormats the printers hard disk
    Notes:
    No is the factory default setting.
    Selecting Yes will render all data on the hard disk unrecoverable even when
    reverse engineering is attempted. This process may take up to eleven hours.
    Understanding printer menus94
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Menu itemDescription
    Job Acct Stat
    Print
    ClearPrints a list of all stored job statistics or deletes the information from the printer hard
    disk
    Notes:
    A printer hard disk must be installed in the printer and operating properly for
    this menu item to be available.
    Selecting Print prints a list of statistics.
    Clear deletes all job statistics stored on the printer hard disk. Clearing
    job account statistics appears on the display.
    The Clear selection will not appear if Job Accounting is set to MarkTrackTM.
    Hex Trace
    ActivateAssists in isolating the source of a print job problem
    Notes:
    When Activate is selected, all data sent to the printer is printed in hexadecimal
    and character representation and control codes are not executed.
    To exit Hex Trace, turn the printer off or reset the printer.
    Coverage Estimator
    Off
    OnProvides an estimate of the percentage coverage of cyan, magenta, yellow, and black
    on a page. The estimate is printed on a separator page.
    Note: Off is the factory default setting.
    LCD Contrast
    1–10Adjusts the contrast lighting of the display
    Notes:
    5 is the factory default setting.
    A higher setting makes the display appear lighter.
    A lower setting makes the display appear darker.
    LCD Brightness
    1–10Adjusts the brightness of the backlight on the display
    Notes:
    5 is the factory default setting.
    A higher setting makes the display appear lighter.
    A lower setting makes the display appear darker.
    PDF menu
    Menu itemDescription
    Scale to Fit
    Yes
    NoScales page content to fit the selected paper size
    Note: No is the factory default setting.
    Annotations
    Do Not Print
    PrintPrints annotations in a PDF
    Note: Do Not Print is the factory default setting.
    Understanding printer menus95
    Downloaded From ManualsPrinter.com Manuals 
    						
    							PostScript menu
    Menu itemDescription
    Print PS Error
    On
    OffPrints a page containing the PostScript error
    Note: Off is the factory default setting.
    Font Priority
    Resident
    Flash/DiskEstablishes the font search order
    Notes:
    Resident is the factory default setting.
    A formatted flash memory option card or printer hard disk must be
    installed in the printer and operating properly for this menu item to be
    available.
    The flash memory option or printer hard disk cannot be Read/Write,
    Write, or password protected.
    Job Buffer Size must not be set to 100%.
    Image Smoothing
    On
    OffEnhances the contrast and sharpness of low‑resolution images and smooths
    their color transitions
    Notes:
    Off is the factory default setting.
    Image Smoothing has no effect on images that are 300 dpi or higher in
    resolution.
    PCL Emul menu
    Menu itemDescription
    Font Source
    Resident
    Disk
    Flash
    Download
    AllSpecifies the set of fonts used by the Font Name menu item
    Notes:
    Resident is the factory default setting. It shows the factory default set of
    fonts downloaded into RAM.
    Flash and Disk settings show all fonts resident in that option.
    Flash option must be properly formatted and cannot be Read/Write,
    Write, or password protected.
    Download shows all the fonts downloaded into RAM.
    All shows all fonts available to any option.
    Font Name
    RO CourierIdentifies a specific font and the option where it is stored
    Notes:
    RO Courier is the factory default setting.
    RO Courier shows the font name, font ID, and storage location in the
    printer. The font source abbreviation is R for Resident, F for Flash, K for
    Disk, and D for download.
    Understanding printer menus96
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Menu itemDescription
    Symbol Set
    10U PC‑8
    12U PC‑850Specifies the symbol set for each font name
    Notes:
    10U PC‑8 is the US factory default setting.
    12U PC‑850 is the international factory default setting.
    A symbol set is a set of alphabetic and numeric characters, punctuation,
    and special symbols. Symbol sets support the different languages or
    specific programs such as math symbols for scientific text. Only the
    supported symbol sets are shown.
    PCL Emulation Settings
    Point Size
    1.00–1008.00Changes the point size for scalable typographic fonts
    Notes:
    12 is the factory default setting.
    Point Size refers to the height of the characters in the font. One point
    equals approximately 1/72 of an inch.
    Point sizes can be increased or decreased in 0.25‑point increments.
    PCL Emulation Settings
    Pitch
    0.08–100Specifies the font pitch for scalable monospaced fonts
    Notes:
    10 is the factory default setting.
    Pitch refers to the number of fixed‑space characters per inch (cpi).
    Pitch can be increased or decreased in 0.01‑cpi increments.
    For nonscalable monospaced fonts, the pitch appears on the display but
    cannot be changed.
    PCL Emulation Settings
    Orientation
    Portrait
    LandscapeSpecifies the orientation of text and graphics on the page
    Notes:
    Portrait is the factory default setting.
    Portrait prints text and graphics parallel to the short edge of the page.
    Landscape prints text and graphics parallel to the long edge of the page.
    PCL Emulation Settings
    Lines per Page
    1–255
    60
    64Specifies the number of lines that print on each page
    Notes:
    60 is the US factory default setting. 64 is the international default setting.
    The printer sets the amount of space between each line based on the
    Lines per Page, Paper Size, and Orientation settings. Select the desired
    Paper Size and Orientation before setting Lines per Page.
    PCL Emulation Settings
    A4 Width
    198 mm
    203 mmSets the printer to print on A4‑size paper
    Notes:
    198 mm is the factory default setting.
    The 203‑mm setting sets the width of the page to allow the printing of
    eighty 10‑pitch characters.
    Understanding printer menus97
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Menu itemDescription
    PCL Emulation Settings
    Auto CR after LF
    On
    OffSpecifies whether the printer automatically performs a carriage return (CR) after
    a line feed (LF) control command
    Notes:
    Off is the factory default setting.
    Setting alterations are duplicated in the PPDS menu.
    PCL Emulation Settings
    Auto LF after CR
    On
    OffSpecifies whether the printer automatically performs a line feed (LF) after a
    carriage return (CR) control command
    Notes:
    Off is the factory default setting.
    Setting alterations are duplicated in the PPDS menu.
    Tray Renumber
    Assign MP Feeder
    Off
    None
    0–199
    Assign Tray 
    Off
    None
    0–199
    Assign Manual Paper
    Off
    None
    0–199
    Assign Man Env
    Off
    None
    0–199Configures the printer to work with printer software or programs that use
    different source assignments for trays, drawers, and feeders
    Notes:
    Off is the factory default setting.
    None is not an available selection. It is only displayed when it is selected
    by the PCL 5 interpreter.
    None ignores the Select Paper Feed command.
    0–199 allows a custom setting to be assigned.
    Tray Renumber
    View Factory Def
    NoneDisplays the factory default setting assigned to each tray, drawer, or feeder
    Tray Renumber
    Restore Defaults
    Yes
    NoReturns all tray, drawer, and feeder assignments to the factory default settings
    Understanding printer menus98
    Downloaded From ManualsPrinter.com Manuals 
    						
    							PPDS menu
    Menu itemDescription
    Orientation
    Portrait
    LandscapeSets the orientation of the text and graphics on the page
    Notes:
    Portrait is the factory default setting.
    Settings are duplicated in the PCL Emulation menu.
    Lines per Page
    1–255Sets the number of lines that print on each page
    Notes:
    64 is the factory default setting.
    The printer sets the amount of space between each line based on the
    Lines per Page, Paper Size, and Orientation settings. Select the desired
    Paper Size and Orientation before setting Lines per Page.
    Lines per Inch
    0.25–30.00Sets the number of lines that print per inch
    Notes:
    6 is the factory default setting.
    Lines per Inch can be increased or decreased in 0.25‑inch increments
    Page Format
    Print
    WholeSets the logical and physical printable area of the page
    Notes:
    Print is the factory default setting. Print data maintains its position with
    respect to edge of the paper.
    When Whole is selected, document margins are calculated from the top
    left corner of the physical edge of the page.
    Printing does not occur outside the printable area.
    Character Set
    1
    2Specifies a default character set for PPDS print jobs
    Notes:
    2 is the factory default setting. Character Set 2 is composed of printable
    characters and symbols used in non‑US English languages.
    When Characters Set 1 is selected, values given to the printer are
    interpreted as printer commands.
    Best Fit
    On
    OffReplaces a missing font with a similar font
    Note: On is the factory default setting. If the requested font is not found, the
    printer will use a similar font.
    Tray 1 Renumber
    Off
    Tray 2Configures the printer to work with printer software or programs that use
    different source assignments for trays, drawers, and feeders
    Notes:
    Off is the factory default setting.
    Tray 2 is displayed only when it is installed.
    Understanding printer menus99
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Menu itemDescription
    Auto CR after LF
    On
    OffSpecifies whether the printer automatically performs a carriage return (CR) after
    a line feed (LF) control command
    Notes:
    Off is the factory default setting.
    Settings are duplicated in the PCL Emulation menu.
    Auto LF after CR
    On
    OffSpecifies whether the printer automatically performs a line feed (LF) after a
    carriage return (CR) control command
    Notes:
    Off is the factory default setting.
    Settings are duplicated in the PCL Emulation menu.
    HTML menu
    Menu itemDescription
    Font Name
    Albertus MT
    Antique Olive
    Apple Chancery
    Arial MT
    Avant Garde
    Bodoni
    Bookman
    Chicago
    Clarendon
    Cooper Black
    Copperplate
    Coronet
    Courier
    Eurostile
    Garamond
    Geneva
    Gill Sans
    Goudy
    Helvetica
    Hoefler TextIntl CG Times
    Intl Courier
    Intl Univers
    Joanna MT
    Letter Gothic
    Lubalin Gothic
    Marigold
    MonaLisa Recut
    Monaco
    New CenturySbk
    New York
    Optima
    Oxford
    Palatino
    StempelGaramond
    Taffy
    Times
    TimesNewRoman
    Univers
    Zapf ChancerySets the default font for HTML documents
    Note: The Times font will be used in HTML documents that do not
    specify a font.
    Menu itemDescription
    Font Size
    1–255 ptSets the default font size for HTML documents
    Notes:
    12 pt is the factory default setting.
    Font size can be increased in 1‑point increments.
    Understanding printer menus100
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Lexmark manuals Comments (0)

    Related Manuals for Lexmark C935hdn User Manual