Lexmark C920 User Manual

							Windows
21
Installing drivers for network printing
gCheck the following to make sure the printer was successfully shared.
The printer object in the Printers folder now has a shared indicator. For example, in Windows NT 4.0, a 
hand appears under the printer object.
Browse Network Neighborhood. Find the host name of the server, and look for the shared name 
assigned to the printer.
Install the printer driver (or subset) on network clients
Using the point and print method
Note:This method is usually the best use of system resources. The server handles driver modifications and 
the print job processing. This lets network clients return to applications much faster.
With this method, a subset of driver information is copied from the server to the client computer. This is just enough 
information to send a print job to the printer.
1Double-click Network Neighborhood on the Windows desktop of the client computer.
2Locate the host name of the server computer, and double-click the host name.
3Right-click the shared printer name, and click Install.
Wait a few minutes for the driver information to be copied from the server computer to the client computer and for 
a new printer object to be added to the Printers folder. The time this takes varies based on network traffic and 
other factors.
4Close Network Neighborhood.
5Print a test page to verify printer installation.
Using the peer-to-peer method
With this method, the printer driver is fully installed on each client computer. Network clients retain control of driver 
modifications. The client computer handles the print job processing.
1Click StartÆ SettingsÆ Printers.
2Click Add Printer to launch the Add Printer wizard.
3Click Next.
4Click Network Printer, and click Next.
5Enter the printer name or URL (if on the Internet or an intranet), and click Next.
If the printer name or URL is unknown, leave the text box blank, and click Next.
6Select the network printer from the Shared printers list. If the printer is not listed, enter the path of the printer in the 
text box. 
The path looks similar to the following:
\\\
Note:If this is a new printer, prompts may occur to install a printer driver. If no system driver is available, 
provide a path to available drivers.
The server host name is the name of the server computer that identifies it to the network. The shared printer name 
is the name assigned during the server installation process.
7Click OK.
8Select whether this printer will be the default printer for the client, and click Finish.
9Print a test page to verify printer installation.
Downloaded From ManualsPrinter.com Manuals 
						

							Macintosh
22
Installing drivers for network printing
Configuring Drag‘N’Print
Note:Drag’N’Print™ support is not available for all printers.
For detailed configuration instructions, launch the drivers CD, click View Documentation, and click Software and utilities.
Macintosh
Note:A PostScript Printer Description (PPD) file provides detailed information about the capabilities of a 
printer to UNIX or Macintosh computers.
To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file, and either 
create a desktop printer on the computer (Mac OS 9.x) or create a print queue in Print Center (Mac OS X).
Mac OS X
Step 1: Install a custom PPD file
1Install a PostScript Printer Description (PPD) file on the computer.
aInsert the drivers CD.
bDouble-click the installer package for the printer. 
Note:A PPD file provides detailed information about the capabilities of a printer to the Macintosh computer.
cClick Continue on the Welcome screen and again after viewing the Readme file.
dClick Continue after viewing the license agreement, and click Agree to accept the terms of the agreement. 
eSelect a Destination, and click Continue.
fOn the Easy Install screen, click Install.
gEnter the user password, and click OK. All the necessary software is installed on the computer.
hClick Close when installation is complete.
Step 2: Create a print queue in Print Center or Printer Setup Utility
Using AppleTalk Printing
Follow these steps to create a print queue using AppleTalk Printing.
1Open Finder, click Applications, and click Utilities.
2Double-click Print Center or Printer Setup Utility.
3Choose Add Printer from the “Printers” menu.
4Choose AppleTalk from the pop-up menu.
Note:Look on the network setup page under the “AppleTalk” heading to know which zone or printer to 
select. 
5Select the AppleTalk zone from the list.
6Select the new printer from the list, and click Add.
Downloaded From ManualsPrinter.com Manuals 
						

							Macintosh
23
Installing drivers for network printing
7Verify printer installation:
aOpen Finder, click Applications, and click Tex t E d i t.
bChoose Print from the “File” menu.
cChoose Summary from the “Copies & Pages” pop-up menu.
Note:Look on the Network Setup page under the “AppleTalk” heading to find the default name of the printer 
to know which printer to select.
If the PPD file displayed in the Summary window is correct for the printer, then printer setup is complete.
If the PPD file displayed in the Summary window is not correct for the printer, delete the printer from the 
printer list in Print Center or Printer Setup Utility, and repeat Step 1: Install a custom PPD file.
Using IP Printing
Follow these steps to create a print queue using IP Printing. To create an AppleTalk print queue, see Step 2: Create a print 
queue in Print Center or Printer Setup Utility.
1Open Finder, click Applications, and click Utilities.
2Double-click Print Center or Printer Setup Utility.
3Choose Add Printer from the “Printers” menu.
4Choose IP Printing from the pop-up menu.
5Enter the IP address or the printer DNS name in the Printer Address box.
6Choose Lexmark from the “Printer Model” pop-up menu.
7Select the new printer from the list, and click Add.
8Verify printer installation:
aOpen Finder, click Applications, and click Tex t E d i t.
bChoose Print from the “File” menu.
cChoose Summary from the “Copies & Pages” pop-up menu. 
dDo one of the following:
If the PPD file displayed in the Summary window is correct for the printer, then printer setup is complete.
If the PPD file displayed in the Summary window is not correct for the printer, delete the printer from the 
printer list in Print Center or Printer Setup Utility, and repeat Step 1: Install a custom PPD file.
Mac OS 9.x
Step 1: Install a custom PPD file
1Insert the drivers CD.
aDouble-click Classic, and double-click the installer package for the printer.
Note:A PPD file provides detailed information about the capabilities of a printer to the Macintosh computer.
bChoose the language needed for use, and click Continue.
cClick Continue after viewing the Readme file.
dClick Continue after viewing the license agreement, and click Agree to accept the terms of the agreement.
eOn the Easy Install screen, click Install. All the necessary files are installed on the computer.
Downloaded From ManualsPrinter.com Manuals 
						

							UNIX/Linux
24
Installing drivers for network printing
fClick Close when installation is complete.
Note:A PPD for the printer is also available in a downloadable software package on the Lexmark Web site 
at www.lexmark.com.
Step 2: Create a desktop printer
1In the Chooser, select the LaserWriter 8 driver.
2For a routed network, select the default zone from the list. For the zone to select, look on the Network Setup page 
under AppleTalk for Zone.
3Select the new printer from the list.
4For printer to select, look on the Network Setup page under the “AppleTalk” heading to find the default name of the 
printer.
5Click Create.
6Make sure there is an icon next to the printer name in the Chooser.
7Close the Chooser window.
8Verify printer installation.
aClick the desktop printer icon just added.
bChoose Printing
Æ Change Setup.
–If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the menu is correct for the 
printer, printer setup is complete.
–If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the menu is not correct for 
the printer, repeat Step 1: Install a custom PPD file.
UNIX/Linux
The printer supports many UNIX and Linux platforms, such as Sun Solaris and Red Hat. Visit the Lexmark Web site at 
www.lexmark.com for a complete list of supported UNIX and Linux platforms.
Note:The Sun Solaris and Linux packages are available on the drivers CD and on the Lexmark Web site at 
www.lexmark.com.
We provide a printer driver package for each supported UNIX and Linux platform. The User’s Guide in each package gives 
detailed instructions for installing and using Lexmark printers in UNIX and Linux environments.
These packages are available for download from the Lexmark Web site. The driver package needed is also on the drivers 
CD.
NetWare
The printer supports Novell Distributed Print Services (NDPS/iPrint). For the latest information about installing a network 
printer in a NetWare environment, launch the drivers CD, and click View Documentation.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing and removing options
25
4Installing and removing options
CAUTION:If you are installing memory or option cards sometime after setting up the printer, turn the printer off 
and unplug the power cord before continuing. If you have any other devices connected to the printer, 
turn them off as well and unplug any cables going to the printer.
You can customize your printer memory capacity and connectivity by adding optional cards. You can also use these 
instructions to help you locate an option for removal. The instructions in this section cover the following options:
Internal options:
Memory cards
–Printer memory
–Flash memory
–Fonts
Firmware cards
–Bar Code
–ImageQuick™
–IPDS and SCS/TNe
–PrintCryption™
Note:Use a Phillips screwdriver to remove the system board access cover.
Other internal options
–Printer hard disk
–RS-232 serial interface card
–Parallel 1284-B interface card
–MarkNet N8000 Series internal print servers (also called internal network adapters or INAs)
Other options:
Duplex unit (removal instructions only)
Finisher
High capacity feeder
Optional drawer (removal instructions only)
Downloaded From ManualsPrinter.com Manuals 
						

							Removing the system board access cover
26
Installing and removing options
Removing the system board access cover
You must remove the system board access cover to install memory cards, a firmware card, a hard disk, or an option card.
CAUTION:This printer weighs 77–107 kg (170–235 Ib) and requires four people to lift. Anytime you move or lift 
the printer, make sure you have enough people to help. Use the handholds located on the sides to lift 
the printer.
This printer has a Kensington Security Slot, which can work with a Kensington lock to secure the system board access 
cover. This may need to be unlocked before the system board access cover can be removed. 
Rear cover
Kensington security slot
Downloaded From ManualsPrinter.com Manuals 
						

							Removing the system board access cover
27
Installing and removing options
You need a number 2 Phillips screwdriver to remove the system board access cover.
1Loosen the eight screws on the system board access cover. Do not remove the screws completely.
Warning:The system board access cover must be replaced before operating the printer.
2Slide the cover up and away from the printer.
Screws
Screws
Downloaded From ManualsPrinter.com Manuals 
						

							Removing the system board access cover
28
Installing and removing options
3Use the illustration to locate the connector for the card you want to install or remove. 
Parallel connector
Ethernet connector
USB connector
Option card cover Optional hard disk
Option cardMemory connectors Flash memory or 
firmware card 
connectors
Downloaded From ManualsPrinter.com Manuals 
						

							Installing a memory card
29
Installing and removing options
Installing a memory card
Complete the following instructions to install a printer memory card.
Note:Memory cards designed for other Lexmark printers may not work with your printer.
1Remove the system board access cover. (See Removing the system board access cover.)
2Push open the latches on both ends of the memory card connector.
3Unpack the memory card.
Warning:Printer memory cards are easily damaged by static electricity. Touch something metal such as the 
printer frame before you touch a memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
4Align the notches on the bottom of the card with the notches on the connector.
5Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6Make sure each latch fits over the notch on the end of the card.
Installing a flash memory or firmware card
Note:Flash memory and firmware cards designed for other Lexmark printers may not work with your printer.
1Remove the system board access cover (see Removing the system board access cover).
Warning:Flash memory and firmware cards are easily damaged by static electricity. Touch something metal, 
such as the printer frame, before you touch a card.
2Unpack the flash memory or firmware card.
Avoid touching the metal pins on the bottom of the card. Save the packaging.
Notches
Downloaded From ManualsPrinter.com Manuals 
						

							Installing a hard disk
30
Installing and removing options
3Holding the flash memory or firmware card by the locking clips, align the plastic pins on the card with the holes on 
the system board.
4Push the flash memory or firmware card firmly into place, and release the locking clips.
The entire length of the connector on the flash memory or firmware card must touch the system board and be 
locked into the connector.
Be careful not to damage the connectors.
Installing a hard disk
Warning:Hard disks are easily damaged by static electricity and physical shock (such as dropping). Touch 
something metal, such as the printer frame, before you touch the hard disk.
Locking clips
Pins
Downloaded From ManualsPrinter.com Manuals