Land Rover Parts Rovers North Cat 2000 North Manual

							FAX 24 HOURS   (802) 879-9152            Order on-line:  www.roversnorth.com
90Our Land Rover experts are ready to help you, just give us a call.1
3
2Accessories
4The Best in Vehicle Protection
P i c k
This 3/4 size implement
by Caldwells of England
conveniently breaks
down into two pieces for
easy storage.  Hickory
handle for long life.
RTC9651X
$77.001) Heavy Duty Limb Risers 
Protect your Defender’s windscreen from branch damage with these T-304 stainless
steel limb risers.  Kit is supplied with all stainless hardware and attaches directly to
the Trophy Brush Bar (page 96). Clamps are available for other brush bars upon
request.
Trophy Bar KitRNA1007$155.00
Kit for other barsRNA1007A$195.002) Vehicle Protection Plate        
90, 110 all models 
Made from heavy duty 10mm 
aluminum alloy with galvanized steel
brackets, this skid plate is strong 
and durable, yet light weight.
Designed to protect your Defender’s
steering and front axle housing from 
off road hazards.
RNA4113$495.003) Rovers North Front
Differential Guard 90 & 110
Essential protection for off-road use. Steel
guard clamps onto the front axle housing and
protects the front differential from the most
common off-road hazards.  (For alternative
see Southdown Axle Guard)
DIFF01$145.004) Sill Protectors with
Recovery Points
These robust sill protectors prevent 
damage to the bodywork during rock-
crawling adventures.  Convenient recep-
tacles allow for use of the Jackall 90/110
adapter for recovering when high cen-
tered or for changing tires.  Sill protec-
tors arrive black primed with all hardware
and installation instructions.
RNA1001$ 329.00432S h o v e l
This off-road shovel with its
straight profile is designed
for digging under stuck
vehicles, outperforming nor-
mal shovels.  Boasted as
the best in the world  this
solid hickory handled recov-
ery tool by Caldwells of
England is the first choice
among expeditioners.
RTC9650 $69.00Wing Top Protector 
Thick aluminum diamond plated treads mount
securely to your Rover’s wing top. These protec-
tors provide a rugged surface that is safe to stand
on. Kit includes:  aluminum tread plates, foam
padding, hardware and easy to follow instruc-
tions.  Left hand plate has cut-out for factory
installed aerial. 
90, 110STC7693$235.00
Ser. II, IIA, III Plain BonnetRNA1016$225.00
Ser. II, IIA, III Deluxe BonnetRNA1017$225.00Shovel Mounting Kit
for Wing To pThis kit provides everything
needed to mount your Caldwells
shovel to the wing-top of a Land
Rover.  Kit includes all brackets,
pads, straps and hardware. Does
not require wing top protectors.
Kit does not include shovel.
RNK8233$65.50For Jackall and adaptor see page 93. 
						

							91 Hours: Mon-Fri: 7:30-5:30; Sat: 9-2:00; EST             Phone: (802) 879-0032 We have a complete Land Rover Genuine Parts inventory, with many parts unlisted. If you don’t see what you need, just ask!G E N U I N E
PA RT SThe Real Thing.
Fuel and Wa t e r
Containers built
to take it all.Accessories
Southdown Rear Differential
Protector
All too often, the rear differential is
forgotten about once the front of
the vehicle has cleared an off-road
obstacle.  The Southdown Rear
Differential Guard offers the differ-
ential complete protection from
damage while driving forward or
when reversing.  Simple do-it-your-
self installation gets you out on the
trail in no time.
RNARA04$219.00Southdown Skid PlateSouthdown, U.S.A. skid plates are crafted from
reinforced 8mm thick steel, providing strength and
rigidity while protecting vulnerable steering com-
ponents. Anodized steel painted yellow. Supplied
complete with stainless steel hardware and do-it-
yourself installation instructions.      
Southdown Skid PlateRNAST01$299.00Southdown Axle Guard
The Southdown Axle Guard provides complete protection of the Defenders axle
casing as well as the extremely vulnerable (and easily bent!) track rod.  This axle
guard protects from both directions while still allowing for full servicing of axle fluids
without removing the guard.  Kit comes complete with stainless steel hardware and
fitting instructions.
Southdown Axle GuardRNAFA01$359.00
Authentic British Army five gallon containers.
Built-in vent for easy pouring with superior
leak-proof lids.
Fuel Can, steel, matte green
RTC8016$48.00
Water Container, ABS, matte black
RTC8017$29.00
Spout for fueling
RTC7086$19.50
Replacement Seal for Fuel Can Lid
RTC7082$ 4.50
S O U T H D OW N
U l t i m ate Ve h i cle Protection New Improved Spout for
fuel can #RTC7086Wa t e r
C o n t a i n e r
R T C 8 0 1 7
Fuel Can
R T C 8 0 1 6 
						

							FAX 24 HOURS   (802) 879-9152            Order on-line:  www.roversnorth.com
92Our Land Rover experts are ready to help you, just give us a call.Class III Receiver Mounted 8000 lb Warn Winch Kit   Defender Low Profile 9,500 lb Warn Winch Kit by Rovers NorthThis kit  relocates the Warn control box and remote lead to the interior battery compart-
ment for better protection.  The hand control outlet is mounted inside the drivers com-
partment for convenience.  Fits standard bumpers for a partially concealed appearance.
Kit includes: 9500 lb Warn winch, mounting brackets, wiring harness, 100 feet of 5/16
cable, roller fairlead, instructions and all hardware needed. Not available for 1997 Def. 90.
(shown with optional Brush Bar STC1368 and Tow Jaw 559636)
Winch KitRNW05$  1,475.00
ARB Bull Bar with Warn 10,000 lb Winch Ser II, IIA, III, 90, 110Superior front end protection for your Land Rover.  This heavy duty front bumper with
integral protection bar and recovery points is built to facilitate a Warn 10,000 lb winch
with roller fairlead.  This kit is supplied by Rovers North completely assembled and
includes bumper bull bar, Warn 10,000 lb winch with 125 ft of 3/8” cable, roller fairlead,
remote control, mounting brackets, wiring harness, instructions and all hardware needed.
ARB110W$  1,899.00
Adapter for USA 110   RNA089$     160.00
ARB Bull Bar only3432090$     725.00* Due to the added weight of the ARB Bumper
or the Rovers North Heavy Duty Bumper with
winch, we recommend that you upgrade your
road springs to accommodate the additional
load. Our choice is heavy duty Genuine Land
Rover springs (page 95) for maximum per-
formance both on and off road.Warn Winch
Mounting Kit Plate  -
S e r. II, IIA and III For mounting Warn 9,000 lb.
or 10,000 lb. winches listed
on this page. Fits standard
Series front bumpers.  Easy
bolt on installation that
requires no welding. Kit
includes all mounting hard-
ware and installation instruc-
tions.  Requires drilling of the
bumper.
Warn 9000 Kit Plate 
RNW03$  260.00
Warn 10000 Kit Plate RNW07$  260.00Wa r n i n g :Winching is dangerous.  Read your operators manual completely and practice
using your winch in a controlled situation before using it for actual vehicle recovery.Accessories
Ideal for owners who would prefer
not to wear a winch full time. Fits an
optional class III receiver (see page 43) to the front of your Rover so you can winch
in either direction.  Kit includes mounting bracket, hand control, 100 feet of 5/16
cable and electric cable for easy plug in power.
Winch KitRNW010$1,195.00
Rear Mount cable kit32963$   155.00When selecting a
winch, consider the
weight of your Land
Rover.  Then con-
sider all of the
resistance that deep
mud, soft sand and
large rocks provide
when you need
your winch the
most!  Land Rover
recommends fitting
a winch that is load
rated to a mini-
mum of twice the
vehicle’s weight.Warn Winches
& winch kits9,500 lb. Warn Winch
12 volt DC. Includes 12 hand held remote 
and roller fairlead. Requires Mounting Kit 
listed below.Warn 9$ 985.00
Rated line pull (single line): 9,500 lbs (4,309 Kg)
Motor: 4.6 HP series wound
Freespooling (clutch)
Sliding ring gear
Wire Rope: 5⁄16 x 100 (7.9mm x 30m)
Brake: Automatic, direct drive cone
Dimensions: 23.2L x 6.3D x 7.6H
Weight : 84 lbs (38.1 Kg)
Rated line pull (single line)  8,000 lbs 
Motor  2.1 HP series wound
Freespooling (clutch), Sliding ring gear
Wire Rope 5⁄16 x 100 
Brake: Automatic, Direct drive cone
Dimensions: 21.1L x 6.3D x 7.5H
Weight: 74 lbs  
						

							93 Hours: Mon-Fri: 7:30-5:30; Sat: 9-2:00; EST             Phone: (802) 879-0032 We have a complete Land Rover Genuine Parts inventory, with many parts unlisted. If you don’t see what you need, just ask!G E N U I N E
PA RT SSuperwinch Winches
& winch kitsHusky Winch
Mounting Kit Plate -
S e r. II, IIA,III 
Superwinch Mount Kit for
Husky 8500 lb or 10000 lb
winch.  Easy bolt-in installation
fits all standard Series front
bumpers without welding or
interfering with the hand crank.
Requires drilling of the
bumper.
Husky 8000 or 10,000 lb.
Mounting Kit Plate only
RNW04$   190.001) Jackall 8000 - 48” Recovery To o l
A required accessory for every Land Rover.  The Jackall is a rugged
and powerful machine that can lift, pull, push or hoist up to 8,000
lbs.  Excellent for off-road self recovery.  Made from the highest
quality cast construction, this model is NATO approved.
1120$ 69.502 )Quick Clamp & Lift Attachment
This versatile accessory allows you to lift, spread or compress
objects with your Jackall.  The Quick Clamp mounts in either direc-
tion at any height.
1323$18.503) 90/110 Adapter
Fits into the factory, rubber plugged
jack receptacles that are located
under the front bumper on
Defender 90 and 110  models.
This adapter provides the safest
way to jack up your Defender on
uneven terrain.
1390$45.00J a c k r a c k(not shown)
Universal 2 part carrying kit for mounting your Jackall
in a variety of places in or outside your Land Rover.
1313$28.50Safari Guard 
Jack Mount
This handy jack
mount provides the
perfect solution to
finding a safe and
stable mounting
point for your Jackall or Highlift Jack. A
securing pin connects the jack mount-
ing plate to the base, allowing you to
easily remove the jack when it isn’t
needed.
RNA1121$79.00213Accessories
Husky 8 - 8,500 lb. Winch
12 volt DC. Includes 12 hand held remote and
hawse fairlead. (requires mounting kit or winch
bumper)2401$ 1095.00
Rated line pull (single line): 8,500 lbs  (3,856 Kg)
Motor: 2.1 HP series wound
Gearing: Oil bathed worm drive
Freespooling (clutch) Splined drum shaft
Wire Rope: 5⁄16 x 150 (7.9mm x 45.6m)
Weight: 125 lbs ( 57 Kg)Husky 10 - 10,000 lb. Winch
12 volt DC. Includes 12 hand held 
remote and roller fairlead. (requires 
mounting kit or winch bumper)
2404$ 1295.00Rated line pull (single line): 10,000 lbs (4536 KG)
Motor: 2.1 HP series wound
Gearing: Oil bathed worm drive
Wire Rope: 3/8 x 90 (9.5 mm x 27.4 m
Weight: 138 lbs (57 Kg)
Jackall 8000 and accessoriesRovers North Heavy Duty Bumper Kit with Superwinch 
Husky Winch - Ser. II, IIA, III & 90/110 
This 1/4 thick heavy duty bumper, is purpose built to fit the Superwinch Husky 8500 lb
or 10000 lb oil cooled worm drive winch.  Includes built-in jack and recovery points
also allows for mounting optional tow jaws.  Supplied completely assembled.  Kit
includes: front bumper, Superwinch with roller fairlead, cable, remote control, wiring
harness, hardware and instructions. Available in black or galvanized bumper finish.
Bumper Kit with 8500 lb. winchRNW06$ 1894.00
Bumper Kit with 10000 lb. winchRNW08$ 2096.00
Adapter for USA 110 RNA089  $   160.00
Bumper OnlyRNA110$   675.00Rovers North Heavy Duty Bumper with 8,500 lb Superwinch, optional Tow Jaws TJA3500 and Brush Bar RTC9547. 
						

							FAX 24 HOURS   (802) 879-9152            Order on-line:  www.roversnorth.com
94Our Land Rover experts are ready to help you, just give us a call.ARB Air Locker for 
Axle DifferentialsAllows you to instantly lock up
axle differentials to prevent wheel
spin with the touch of a button.
This is the most effective traction
device you can add to your Land
Rover. Designed to withstand the
punishment of hard off-road use,
with no compromise in highway
performance. Air compressor kit
will operate one or two lockers as
well as function as an on-board
compressor for inflating tires, etc.
Air Compressor KitRDCK$ 235.00
II, IIA, III Front or Rear Locker RD03$ 699.00
Salisbury Rear Locker RD32$ 699.00
Defender 90 Front or Rear LockerRD56$ 699.00
Defender 110 Front LockerRD56$ 699.00
Defender 110 Rear LockerRD20$ 689.00
Tire Inflation KitPUK$42.00Winch Accessory
Kit by Wa r n
Includes: Snatch
Block, shackle, gloves,
2 x 8 (5cm x 2.4m)
tree trunk protector,
10 of 15/16 (3m of
8mm), grade 7 choker
chain with hooks. Four
internal pockets for
organizing your acces-
sories. Plenty of stor-
age space for adding your own accessories. 
Red Cordura® Heavyweight Nylon Soft Case.RNW02$ 225.00Military Recovery Loops  - 90,/110
Heavy duty galvanized recovery loops as fitted front
and rear on military 90 and 110 Land Rovers. Replaces
shipping eyes located on chassis.  Special mounting
hardware included.
Military Recovery Loops     RNK0211 $  59.00 each3/4 D Shackle
Excellent accessory
for winching and
vehicle recovery.
Useful for attaching
a tree strap to
winch cable.
RNP0120$15.00Recovery RingExcellent accessory
for winching and
vehicle recovery.
Dimensions are
41/2x 65/8
RNA1000$25.50Snatch Block
Used to double the pulling power of your winch and to aid
in angled pulls.8555$  69.00Class III Front Receiver - 90, 110
Perfect for this kit provides a class III receiver on the front of your Defender.  Also .
Simple bolt-on installation in minutes.
Defender 90, 110RNA085$  257.00Class III Rear Receiver - Ser. II, IIA and III
Bolts onto rear frame member (illustrated on page 67).  Includes mounting hardware.
All models except 109 Station WagonRNA084$  199.00
Military models onlyRNA086$  195.00
109 Station Wagon onlyRNA087$  195.00Accessories
Recommended Winch AccessoriesRecovery Hitch and Receiver
Adapter for all Models
(A) Receiver Adapter allows recovery and
tow hitches to be mounted into Land
Rovers Class III rear receiver and Rovers
Norths Class III front receiver.
Receiver AdapterRNA082 $  69.00
(B) Recovery Hitch can be front or rear
mounted to handle snatch strap, chain or
winch cable as used on the Camel Trophy.
Special mounting hardware included.
Recovery Hitch    TJA3500 $  89.50 A
BHand Throttle Kit - Defender 90 / 110
This manual locking control allows you to increase
engine RPM without having to keep your foot on the
accelerator.  Ideal for stationary use, like winching or
jump starting when increase alternator output is
desired.  Mounts to right side of steering column
where blanking plug is for easy access from the driv-
ers position.
RNK707$119.00Kinetic Recovery Rope
An extremely effective recovery tool that allows you to
use vehicle momentum without the sudden shock you
would experience from using a chain.  Requires securely
fastened recovery hitches for safe use.
KRR001$149.00Defender 110 using aluminum platforms for traction over a log bridge.
Tree Strap
The tree strap will allow you to use
a tree as a winch anchor point with-
out harming the tree.  Using a cable
or chain around a tree will injure
and possibly kill the tree. 8 long,
30,000lb capacity.
2531$47.50Perforated Aluminum Platforms
Available new or military surplus. These 5’ floatation mats help
keep your vehicle moving over soft ground. Made from heavy
gauge aluminum, yet only weigh 14 lbs. each. Not intended for
use as a bridge but for traction over marshy surfaces.
RNP1004 New 5’ $295.00
PAP05 Military surplus 5’$195.00 
						

							Highest quality 
seals manufactured
for longest life.
Piston rod strong 
enough to lift 20 tons.
Rising rate valve system dampens
all bumps.  No spring loaded ball
check valves to wear out.
Single tube design helps 
dissipate heat to prevent shock fade.
Precision seamless tube to tolerances
of .00058mm.  No weak points.
Patented nitrogen gas pressure 
principle gives better 
control, safety and 
c o m f o r t .95 Hours: Mon-Fri: 7:30-5:30; Sat: 9-2:00; EST             Phone: (802) 879-0032 We have a complete Land Rover Genuine Parts inventory, with many parts unlisted. If you don’t see what you need, just ask!G E N U I N E
PA RT S
Which Suspension?
We’ve learned from years of experience that Genuine Land Rover
road springs provide the optimal combination of durability,
improved off-road ability and increased load-carrying capacity.  In
order to select the best shock absorber for your Defender, first consid-
er the conditions where you most often drive your vehicle.  For most
on-road and recreational off-road driving situations, we have found
that the Bilstein shocks provide the best performance.  If you’re usu-
ally loading up your Defender with lots of extra gear and then tack-
ling rugged terrain, the Ironman shocks will perform best for your
Land Rover.AccessoriesP e r f o r m a n c e
P o l y u r e t h a n e
B u s h i n g s
It used to be if you wanted the
superior durability of
polyurethane suspension bush-
ings, you had to endure the
firmer ride they offered.  All that
has changed, thanks to a break-
through by Iron Man 4x4
Suspension of Australia. Now
available in a complete kit, that
replaces 100% of your Land
Rovers suspensions bushings, is a remarkable polyurethane suspension
material called soft-poly.  For the first time in North America, owners
can experience suspension bushings with the ride quality of Land
Rovers rubber bushings, with twice the life expectancy.  Iron Man Soft-
Poly Bushes will most likely be the last bushings you will ever need in
your Land Rover, giving it years and years of a like new ride.
Complete Kit: 
Defender 110ISP0002$199.00
Defender 90ISP0004$199.00
Spring Bushing Kit
Series II, IIA, & III 88” & 109” Contains 8 spring bushes 
plus the two (2) rear chassis bushes
ISP0001$135.00Nothing out performs Land
Rover Heavy Duty SpringsWhen traveling overland with a loaded vehicle, up-grading
your suspension is essential. Our choice for durability is
Land Rovers heavy duty springs. They will add approximate-
ly 1 1/2 of extra body clearance to your Land Rover and
greatly improve stability when negotiating poor roads. 
Sets include both front and rear road springs.
Match them with a set of Bilstein shocks for a superior
ride or a set of Ironman shocks for improved handling under
arduous conditons.
Defender 90RNK5101$289.00
Defender 110RNK5102$235.00
Defender 90  w/ARB winchRNK5111$279.00G E N U I N E
PA RT SBilstein 
Shock 
A b s o r b e r s
Hands down, one of the most satisfying
improvements you can make to your Defender.
We guarantee a remarkable improvement in 
the handling, control and comfort of your Land Rover on 
or off-road. Superior construction and a lifetime warranty
against manufacturer’s defects. You’ll wonder how you 
managed without them!
Defender 90/110 Set of four    RNA243/4$  299.00 
Front onlyRNA243$    85.00 ea.
Rear onlyRNA244$    85.00 ea.
Ironman Heavy Duty Off-Road ShocksDesigned for the Defender involved in serious off-roading. Ironman’s variable-rate shock
absorbers improve stability and handling. These gas-pressurized shock absorbers are the
perfect complement to Defenders fitted with heavy-duty springs and frequently loaded
with heavy equipment. Complete kits include the shock absorber, polyurethane bushings 
and hardware.
Defender 90/110set of fourISP0007$ 269.00
Front onlyISP2080$   78.00 ea.
Rear onlyISP2640$   78.00 ea. 
						

							FAX 24 HOURS   (802) 879-9152            Order on-line:  www.roversnorth.com
96Our Land Rover experts are ready to help you, just give us a call.Heavy Duty Trophy Brush BarWith fixed mesh lamp guards, limb riser brackets and winch protection bar. Black nylon
coated. Shown with RNW06 Bumper Winch Kit.
RNA011$  595.00Lamp Guards Front 1969 on. For bumper overriders and towing rings see page 50.
Front Early, Rear All ModelsAccessories
For Late Series IIA, Ser III, 90, 110. Black nylon coated, bolt on installation,
hardware and instructions included.Straight style Brush Bar
With removable Lamp Guards.  Shown with Rovers North Heavy Duty Front
Bumper and 8,500 lb Superwinch RNW06 and Recovery Hitch,
RTC9547$  439.00Genuine Land Rover
Brush Bars
Wrap-around style Brush Bar
(90 & 110 only)RTC8120$  445.00Lamp Guards Series II, IIA & III
Front Hinged Lamp Guards 90,110
Manufactured from black nylon coated steel, these Genuine Land Rover lamp guards
protect lenses and bodywork. Front guards hinge downward for cleaning or servicing
lamps and will not interfere with a front brush bar.
Front SetRTC8969$215.00
Rear SetSTC1373$160.00Lamp Guard Front Late
Complete protection for Land Rovers with headlamps in wings, IIA 1969 on, III, 90, 110.
345985    $44.00 eaLamp Guard Early IIA
Protective galvanized cage for front parking & directional lights on Land Rovers with
headlamps in grill.MRC316   $45.00 eaRear Flood Lamp Kit 
We’re always looking for accessories that make life
easier.  This lamp certainly helps.  Perfect for backing
up or hooking up a trailer at night, this dual beam, 110w
flood lamp provides a very bright, 180° panorama.  The
kit includes everything you’ll need:  lamp, black coated
stainless steel bracket, dash switch, wiring harness,
relay and instructions.  And a bonus - there’s no drilling
of body work required.
DLM113K$199.00
Rear Hella Flood Lamp Mount
Used to fit a work lamp above 
the license plate lamp. Black coated stainless steel.
DLM113$39.50D90 Lamp Guard
Protectors ’95-on
Black painted steel finish
RNA090$225.00Lamp Guard RearProtection for standard rear lens-
es. Will not fit assemblies with 4”
amber directionals without modifi-
cation.MRC316    $45.00 ea 
						

							97 Hours: Mon-Fri: 7:30-5:30; Sat: 9-2:00; EST             Phone: (802) 879-0032 We have a complete Land Rover Genuine Parts inventory, with many parts unlisted. If you don’t see what you need, just ask!G E N U I N E
PA RT SRallye 4000 Is bigger really better?  In this
case, a resounding yes!  The per-
fect lamp for the top of your
Defender - with a corro-
sion-resistant metal
housing, water-
proof connections
and knurled
adjustment knobs
that allow for pre-
cise aiming with-
out tools.  Stable,
sturdy and
BRIGHT!Vision Plus Headlamp Conversion
High performance European headlamp technology in a “street legal D.O.T.” version. Most
powerful, legally approved headlamp on the market. These headlamps provide a precise,
focused beam pattern that turns night into day! A direct replacement for factory headlamps
on all Defender and Series Land Rover models.  
60 watt high beam / 55 watt low beam Hella Vision Plus70477$48.50eaPIAA 80 Series Dual Beam 
Massive lights that brighten your night!
These deep 8” round driving lights
allow you to flip between a 90 watt,
wide angle low beam and an incredibly
bright 135 watt high beam.  Simply, the
brightest lights available for your Land
Rover.  Our kit provides both lamps,
wiring harness, protective covers and
high/low switch.
RNK8012$530.00Switches / HarnessAuxiliary Switch
Defender 90 and 110
Genuine Land Rover switch
mounts to the dash on the left
side of the steering column.
Perfect for auxiliary lights, a
rear work lamp  or an ARB air
compressor.
C38637L$  24.50Auxiliary Light Switch
Defender 90 and 110
This Genuine Land Rover
switch mounts to the right
hand side of the steering col-
umn, mirroring the headlamp
switch.
PRC3432$  68.00Auxiliary Switch 
Series II, IIA and III
This Genuine Land Rover aux-
iliary switch is a single throw
switch - identical in design to
the factory toggle switches
on your Series Land Rover.
RTC430$  11.50Hella Relay - All Models
Hella relays provide improved
performance of electrical
accessories by reducing the
voltage drop that occurs when
power is routed directly
through a switch.  Hella relays
also allow for the use of high-
er wattage light bulbs than
factory switches are capable
of handing on their own.  
15A Hella relayJ87108$   14.25
30A Hella relay87106$   14.25Hella and PIAA
wiring harnesses
provide “scotch-
lock” crimp-on
connectors, which
allow for quick
installation of aux-
iliary lights.  These
connections easily
corrode and can
damage the expen-
sive factory wiring
harness.  We suggest
always soldering
connections to pre-
vent corrosion of
the wiring harness
and reduce the risk
of an electrical fire.   PIAA 80 Pro XT lamps shown with Trophy Brush Bar, Southdown Skid Plate and Axle
Guard and Rovers North heavy-duty bumper.Hella 4000
wiring harness
Makes for simple do-it-
yourself installation.
87202  $ 55.00Accessories
H e l l a
He l l aHella Rallye 4000 Fog Lamp83
/4”31
/2” 5”93
/16”
Hella Rallye 4000
Euro Driving
Rallye 4000 Fog Lamp74805$145.00
Rallye 4000 Euro Driving74807$145.00
Rallye 4000 Pencil Beam74808$145.00
Wiring Harness87202$  55.00
Grilles79387$  29.00eaHella Map Light
Flexible attachment provides ade-
quate light for both front passengers.
LRNA907$38.00PIAA 80 PRO XT 
These 120 watt phasers measure only 7” diam-
eter, but provide an enormous amount of light.
Perfect for the brush bar that sits only inches
away from the grille - or anywhere that space is
limited.  Impressive quality and a complete kit
that includes both lamps, wiring harness and
protective covers.  PIA8362$325.00 
						

							FAX 24 HOURS   (802) 879-9152            Order on-line:  www.roversnorth.com
98Our Land Rover experts are ready to help you, just give us a call.Mud Flap KitsSupplied with mounting brackets.
Front Pair
90, 110RTC9479$95.00
Rear Pair with Land Rover Logo
88,109 Reg320590$74.50
90 AllRNK015$139.00
110 AllRNK014$122.00Defender 90 Rear Mud Flap RNK015 shownRovers North
Radiator Muff
• Dramatic increase in your
heater’s output
• Quicker warm-up
•Reduced engine stress
In the snowbelt, this simple
accessory will make a big dif-
ference in a Land Rover’s win-
ter performance. By controlling the airflow through the radiator in freezing weather,
the engine can run at its optimum operating temperature. This means reduced
engine wear and increased heater output. We have developed this radiator muff
exclusively for our customers and we believe it is the finest one you will find. 
Made of heavy Cordura® Nylon with sturdy fasteners for a secure fit and long life.
Defender 90/110RNM0004$ 39.90
Early IIARNM0001$ 39.90
Late IIARNM0002$ 39.90
Ser. IIIRNM0003$ 39.90
Air PortableRNM0005$ 45.50Important Note: EFI V8 petrol engines are
unsuitable for deep water conditions without
extensive waterproofing. Fitting a raised air intake
alone does not make your EFI V8 waterproof. Yo u r
ECU module, and ignition system will require spe-
cial attention when waterproofing and often relo-
cation of the ECU is necessary.Heavy Duty Rubber Floor Mats (not shown)
Raised perimeter and deep tread trap a surprising amount of mud and water.
Hose down to clean. The 4 piece set covers front and rear footwells.
Defender 90/110 Front MatsRTC8098AB$  95.00
Defender 110 Middle Footwell RTC8099$  89.00Defender 90 Load Space Mat
1/4 heavy duty rubber load space mat.  This
flexible heavy duty rubber load space protec-
tor offers excellent protection to the inside of
your vehicle.  It easily rolls up to be stored
out of the way.
Defender 90STC7619$ 199.00
Station Wagon Mat STC7898$ 199.00Defender 90/110 Jump Seat Black Vinyl 
Jump SeatsRJS1000D$ 255.00 ea.
Seat BeltsRTC6750$   69.00 ea.
Jump Seat Covers Rear Set (4)STC8181AA$ 275.00Waterproof Seat Cover Set 90, 110
Protect your Land Rover’s cloth seats from dirt, mud, dogs and
kids. These grey coloured waterproof nylon covers are exception-
ally hard wearing and com-
fortable in use. Ideally suited
for the active Land Rover.
Front Seat Set
STC8178AA$149.00
110 Middle Seat Set
STC8183AA$275.00
90/110 Rear Jump Seat (set of four)
STC8181N$239.00AccessoriesTire Cover
Thick durable black vinyl cover with Land Rover
logo in white. Fits the following tire sizes:
750x16 , 235/85x16 and 265/75x16
MXC6407$79.00
225/80x15, 600x16 and 235/70x16
MXC6409$79.00K&N Performance Air Filter
Defender 90 / 110
The K&N air filter for Defender
90s and 110s replaces the fac-
tory paper air filter element
with a cleanable fiber filter.
Unique design uses premium
quality oiled cotton gauze sand-
wiched between layers of wire
screen, allowing for maximum air flow and filtration.
Simply run the filter under tap water and re-spray
with the K&N oil supplied in the service kit.
Defender 90 and 110 K&N filterE2350$45.00
Service Kit995000$14.50Genuine paper element air filter
Defender 90/110RNF950$11.00S e r v i c e
K i tRaised Air Intake - All Land Rover Models
Provides superior intake filtration to insure clean air 
delivery to your engine when operating in extremely 
dusty conditions. 
90, 110RNA1002$425.00
2.25 litre Ser II, IIA & III608156$429.00Defender 90/110 Jump Seat
Shown with Waterproof Seat Cover    Defender 90 MatS T C 7 6 1 9Defender raised air intake  RNA1002 Series raised air intake 608156 
						

							99 Hours: Mon-Fri: 7:30-5:30; Sat: 9-2:00; EST             Phone: (802) 879-0032 We have a complete Land Rover Genuine Parts inventory, with many parts unlisted. If you don’t see what you need, just ask!G E N U I N E
PA RT SAccessoriesPerformance Stainless Steel Exhaust
System for Series II-III 2.25 petrolPlan to keep your Series Land Rover forever?  
H e r e ’s the exhaust system to go with it.  
• Increased Power
• Improved Fuel Mileage
• Stainless Steel construction
• Lifetime Warranty for original purchaser
RNE0001 88” Stainless Exhaust System.$ 4 4 9 . 0 0
Complete with instructions and Stainless Steel hangers.LR Owner International Magazine says:“Better fuel
economy, better performance, and better ground clearance... 
NRP certainly deliver on its claims, and the new system even
throws in a delightful exhaust note...”Series II, IIA, III
Performance N . R . P. Stainless
Steel Exhaust,
Defender 90
Introducing the N.R.P. stainless
steel performance exhaust system
for Defender 90.  By far the finest
stainless steel exhaust system we
have fitted to a Land Rover!
Designed for the do-it-yourselfer,
this system installs easily and is
backed with a lifetime guarantee.
Cat-back system includes center
silencer, tailpipe, all stainless steel
hangers, hardware and installation
instructions.
RNE0002$519.00N . R . P. Performance Cats for Defender 90,110
Our new “Y” pipe assembly, including catalytic converters, 
provides owners of Defender 90s and 110s with the first quality alterna-
tive to the genuine part.  Decreased back pressure and twin tube construction result in
noticeably improved performance. Carefully positioned tubing parallels the chassis, 
protecting both catalytic 
converters and resulting in 
increased ground clearance. 
Guaranteed to be the easiest 
“Y” pipe to install, this kit 
comes complete with the “Y” pipe
assembly, manifold gaskets, all hardware 
and installation instructions.  
RNE0020  1993-1995$ 795.00
RNE0021  1997 D90$ 795.00Defender 90, 110
Performance