Home > Land Rover > Automobile > Land Rover Freelander 2003my Electrical Library Rover Manual

Land Rover Freelander 2003my Electrical Library Rover Manual

Here you can view all the pages of manual Land Rover Freelander 2003my Electrical Library Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.

Page 131

DESCRIPTION AND OPERATION
4.106FREELANDER 03MY
HEAD, SIDE AND TAIL LAMPS
DESCRIPTION
General
The headlamp assemblies each contain a side lamp bulb and a dual filament headlamp bulb. 
The tail lamps and rear number plate lamp operate together with the side lamps and 
headlamps, and share a dual filament bulb with the brake lamps. The rear number plate 
lamp is incorporated into the tail door handle.
The side and headlamps are controlled via the lighting switch, which is mounted on the end 
of the LH...

Page 132

DESCRIPTION AND OPERATION
FREELANDER 03MY 4.107
OPERATION
General
Feed from the positive battery terminal (C0192) is supplied to fusible link 3, fusible link 9 and 
fusible link 12 of the engine compartment fuse box (C0632) on an R wire. Fusible link 12 
(C0570) provides a constant battery feed to the lighting switch (C0041) on a UN wire. A 
second constant battery feed is provided by fusible link 12 (C0575) to the lighting switch 
(C0041) on an RN wire.
Fusible link 9 (C0570) provides a constant battery...

Page 133

DESCRIPTION AND OPERATION
4.108FREELANDER 03MY
Fuse 28 (C0583) also provides a feed to the following on RB wires:
zThe LH tail lamp (C0121).
zThe LH rear side marker lamp (C0919) (NAS vehicles only).
zThe trailer pick-up (C0499).
All are earthed on B wires except the trailer pick-up, which is earthed on a W then B wire.
Headlamps
Dipped Beam
When the lighting switch is turned to the headlamp position, current flows across the switch 
(C0041) to fuse 24 and fuse 25 of the passenger compartment fuse box...

Page 134

DESCRIPTION AND OPERATION
FREELANDER 03MY 4.109
CCU
When the lighting switch is turned to the main beam position, current flows across the switch 
(C0041) to the CCU (C0428) on an OU wire. The CCU also monitors the condition of the 
driver door switch (C0441) on a PS then PW wire, and the ignition switch. If the driver door 
switch is closed and the ignition switch in the off position, the CCU will power its integral 2 
KHz sounder.
For more information on the driver door switch, refer to the  Anti-theft...

Page 135

DESCRIPTION AND OPERATION
4.110FREELANDER 03MY
HEAD, SIDE AND TAIL LAMPS – CANADA
DESCRIPTION
General
Daylight running lamps are fitted to Canadian specification vehicles only. The following 
lamps will operate when the engine is running, irrespective of lighting switch position.
NOTE: Daylight running lamps are extinguished when the vehicle is in Park.
zHeadlamps (dipped beam only)
zSide lamps
zTail lamps
zSide marker lamps
zNumber plate lamps.
NOTE: Instrument illumination is not operational until the...

Page 136

DESCRIPTION AND OPERATION
FREELANDER 03MY 4.111
Side Lamps
When the lighting switch is turned to the side lamp position, current flows across the switch 
(C0041) to the daylight running relay (C0212) on an RW wire. Current flows through the 
daylight running relay (C0212) to fuse 16 and fuse 28 of the passenger compartment fuse 
box (C0587) on an R wire. Fuse 16 (C0582) provides a feed to the following on RO wires:
zThe RH side lamp (C0011).
zThe RH front side marker lamp (C0916).
Fuse 16 (C0583) also...

Page 137

DESCRIPTION AND OPERATION
4.112FREELANDER 03MY
The energised main/dipped beam relay allows a feed from fusible link 9 of the engine 
compartment fuse box (C0570) to provide a feed to fuse 18 and fuse 20 of the passenger 
compartment fuse box. Fuse 18 (C0584) provides a feed to the RH headlamp main beam 
bulb (C0011) on a UG wire. Fuse 18 (C0589) also provides a feed to the warning lamp 
located within the instrument pack (C0233) on a UG wire. Both are earthed on B wires.
Fuse 20 (C0587) provides a feed...

Page 138

DESCRIPTION AND OPERATION
FREELANDER 03MY 4.113
The CCU (C0428) monitors the condition of the lighting switch (C0041) via a OU wire. A feed 
will only be provided to the CCU when the lighting switch is turned to the Headlamp 
position.
If all of these conditions are met, the CCU (C0593) provides an earth path for the daylight 
running relay (C0212) on an RG wire. This allows a battery feed from fusible link 12 of the 
engine compartment fuse box (C0570) to flow through the relay (C0212) and power the...

Page 139

DESCRIPTION AND OPERATION
4.114FREELANDER 03MY
FOG LAMPS
DESCRIPTION
General
NAS vehicles incorporate the rear fog lamps within the tail lamp assemblies, where they also 
double as brake lamps. For more information on brake lamp operation, refer to the  Brake 
and Reverse Lamps  section of this manual.
 
+  BRAKE AND REVERSE LAMPS. 
All other vehicles have the fog lamps located on either side of the rear bumper, where they 
operate in the normal manner. Both systems are controlled by the Central Control...

Page 140

DESCRIPTION AND OPERATION
FREELANDER 03MY 4.115
The energised rear fog lamp relay (C0583) provides a feed to both the LH fog lamp (C0490 
on NAS vehicles, C0515 on all other vehicles), and the RH fog lamp (C0489 on NAS 
vehicles, C0512 on all other vehicles) on RY wires. The relay also provides a feed to the 
trailer pick-up (C0499) on a RY then U wire. The fog lamps are earthed on B wires.
The energised rear fog lamp relay (C0589) also provides a feed to the instrument pack 
warning lamp (C0230) on a UY...
Start reading Land Rover Freelander 2003my Electrical Library Rover Manual

Related Manuals for Land Rover Freelander 2003my Electrical Library Rover Manual

All Land Rover manuals