Land Rover Freelander 2002my Electrical Library 3rd Edition Rover Manual

DESCRIPTION AND OPERATION
4.110FREELANDER 02MY
Wiper
The CCU (C0592) monitors the condition of the wiper switch (C0079) by providing a feed via 
the passenger compartment fuse box (C0589) on an RG wire. When the switch is pressed, 
current flows across the switch contacts (C0079) to earth on a B wire. When the CCU 
registers this earth, it provides a feed to the rear wiper relay (C0124) on a YB wire. The rear 
wiper relay contains two independent relays; a forward relay and a reverse relay. 
The...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.111
Tail Door Switch
The CCU (C0428) monitors the condition of the tail door switch (C0616) by providing a feed 
on a BO wire. The tail door switch is open circuit when the tail door is closed. When the tail 
door is opened, the switch contacts close and an earth path is created on a B wire. Sensing 
this earth path, the CCU suspends operation of the rear wiper.
Roof On Switch (3 Door Vehicles Only)
Fuse 14 of the passenger compartment fuse box (C0583) provides...

DESCRIPTION AND OPERATION
4.112FREELANDER 02MY
BRAKE AND REVERSE LAMPS
DESCRIPTION
Brake Lamps
Three brake lamps are fitted to the rear of the vehicle. Two brake lamps are mounted above 
the rear bumper, and share a dual filament bulb with the tail lamps. A third, high mounted 
tail lamp is housed within a casting mounted on the tail door above the spare wheel.
NOTE: NAS vehicles are also fitted with a second pair of brake lamp bulbs. These operate 
in conjunction with the normal brake lamp bulbs. These...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.113
OPERATION
General
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 of the engine 
compartment fuse box (C0632) on an R wire. Fusible link 3 (C0571) is connected to the 
ignition switch (C0028) by an N wire. When the ignition switch is turned to the ignition 
position, current flows across the switch (C0028) to fuse 2 of the passenger compartment 
fuse box (C0588) on an NW wire. 
Fuse 2 (C0580) provides an ignition feed to the...

DESCRIPTION AND OPERATION
4.114FREELANDER 02MY
Automatic Transmission
Fuse 2 of the passenger compartment fuse box (C0580) provides an ignition feed to the 
reverse lamp relay (C0935) on a G wire. When reverse gear is selected, the Electronic 
Automatic Transmission (EAT) ECU (C0932) provides a feed to the reverse lamp relay coil 
(C0935) a feed on an NG wire. The relay coil (C0935) is earthed on a B wire. The energised 
reverse lamp relay (C0935) is now able to provide a feed to the RH (C0455) and LH...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.115
HEAD, SIDE AND TAIL LAMPS
DESCRIPTION
General
The headlamp assemblies each contain a side lamp bulb and a dual filament headlamp bulb. 
The tail lamps and rear number plate lamp operate together with the side lamps and 
headlamps, and share a dual filament bulb with the brake lamps. The rear number plate 
lamp is incorporated into the tail door handle.
The side and headlamps are controlled via the lighting switch, which is mounted on the end 
of the LH...

DESCRIPTION AND OPERATION
4.116FREELANDER 02MY
OPERATION
General
Feed from the positive battery terminal (C0192) is supplied to fusible link 3, fusible link 9 and 
fusible link 12 of the engine compartment fuse box (C0632) on an R wire. Fusible link 12 
(C0570) provides a constant battery feed to the lighting switch (C0041) on a UN wire. A 
second constant battery feed is provided by fusible link 12 (C0575) to the lighting switch 
(C0041) on an RN wire.
Fusible link 9 (C0570) provides a constant battery...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.117
Headlamps
Dipped Beam
When the lighting switch is turned to the headlamp position, current flows across the switch 
(C0041) to fuse 24 and fuse 25 of the passenger compartment fuse box (C0587) on a UO 
wire. Fuse 25 (C0582) provides a feed to the RH dipped beam bulb (C0011) on a UB wire. 
Fuse 24 (C0581) provides a feed to the LH dipped beam bulb (C0009) on a UK wire. Both 
are earthed on B wires.
Main Beam
When the lighting switch is turned to the headlamp...

DESCRIPTION AND OPERATION
4.118FREELANDER 02MY
RH Motor
The headlamp levelling switch (C0093) is connected to the RH headlamp levelling motor 
(C0070) by a UB wire. By comparing the voltage provided by the switch against a feed 
provided by fuse 16 of the passenger compartment fuse box (C0582) on an RO wire, the 
motor moves the headlamp to the required position. The motor is earthed on a B wire.
LH Motor
The headlamp levelling switch (C0093) is connected to the LH headlamp levelling motor 
(C0071) by a...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.119
HEAD, SIDE AND TAIL LAMPS – CANADA
DESCRIPTION
General
Daylight running lamps are fitted to Canadian specification vehicles only. The following 
lamps will operate when the engine is running, irrespective of lighting switch position.
NOTE: Daylight running lamps are extinguished when the vehicle is in Park.

Headlamps (dipped beam only)

Side lamps

Tail lamps

Side marker lamps

Number plate lamps.
NOTE: Instrument illumination is not operational until the...