Land Rover Freelander 2002my Electrical Library 3rd Edition Rover Manual

DESCRIPTION AND OPERATION
4.100FREELANDER 02MY
OPERATION
Td4
Feed from the positive battery terminal (C0192) is supplied to fusible link 1 and the main 
relay (C0632) on an R wire. Both are located in the engine compartment fuse box. Operation 
of the main relay (C0576) is controlled by the Engine Control Module (ECM) (C0603) on a 
WK wire. The energised main relay provides a feed to fuse 4, which is also located in the 
engine compartment fuse box.
Fusible link 1 is connected in series with fusible link...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.101
KV6
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 and the main 
relay (C0632) on an R wire. Both are located in the engine compartment fuse box. Operation 
of the main relay (C0578) is controlled by the ECM (C0371) on a WK wire. The energised 
main relay provides a feed to fuse 4, which is also located in the engine compartment fuse 
box.
Fusible link 3 (C0571) is connected to the ignition switch (C0028) by an N wire. When...

DESCRIPTION AND OPERATION
4.102FREELANDER 02MY
HEATED REAR WINDOW (HRW)
DESCRIPTION
General
The HRW comprises eleven metallic strips bonded to the inside surface of the tail door glass 
to form an element. The metallic strips terminate in two larger strips at the bottom of the 
glass. Two connectors bonded to the terminations provide attachment of the supply and 
earth connections.
The HRW is controlled by the Central Control Unit (CCU) via a non latching switch mounted 
on the centre console. The switch...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.103
OPERATION
General
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 and fusible link 
4 of the engine compartment fuse box (C0632) on an R wire. Fusible link 4 (C0574) provides 
a constant battery feed to the HRW relay and fuse 14 of the passenger compartment fuse 
box (C0587) on an NW wire. 
NOTE: Only 3 door vehicles utilise fuse 14 for HRW operation.
The earth path for the HRW coil is controlled by the CCU (C0592), which is...

DESCRIPTION AND OPERATION
4.104FREELANDER 02MY
Tail Door Window Lift
The HRW will not operate if the tail door glass is not in the fully closed position. If the tail 
door window is opened while the HRW is operational, the CCU suspends the feed to the 
HRW element by de-energising the HRW relay. The CCU (C0428) monitors the condition of 
the tail door window via the tail door window switch (C0354) on BR and BK wires. The switch 
(C0354) is earthed on a B wire.
For more information on tail door window...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.105
HEATED FRONT SCREEN (HFS)
DESCRIPTION
General
The Heated Front Screen (HFS) is an optional fit introduced at 2002 MY, and consists of two 
heater elements which are embedded into the LH and RH sides of the windscreen. Two 
connectors at the base of the windscreen provide the power feed and an integral earth for 
each of the heater elements.
Operation of the HFS is controlled by the CCU and a non latching switch on the centre 
console. The switch contains an...

DESCRIPTION AND OPERATION
4.106FREELANDER 02MY
HFS Switch
The CCU (C0429) monitors the condition of the HFS switch (C0131) by providing a feed on 
a KO wire. When the switch is pressed the CCU senses the momentary earth path, and 
(providing all other conditions are met) energises the HFS relay. The switch (C0131) is 
earthed on a B wire.
HFS Elements
The energised HFS relay (C0994) provides a feed to fuse A and fuse B (C1860) on a pair of 
NW wires. Fuse A (C1860) provides a feed to the LH screen...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.107
WIPERS AND WASHERS
DESCRIPTION
Front
Wipers
Operation of the windscreen wipers is controlled by the Central Control Unit (CCU). There 
are four modes of wiper operation. These are selectable from the RH column stalk when the 
ignition switch is in the ignition position.
NOTE: Windscreen wiper operation is temporarily suspended while the engine in cranking.
The modes of windscreen wiper operation are:

Slow wipe.

Fast wipe.

Intermittent wipe.

Flick wipe....

DESCRIPTION AND OPERATION
4.108FREELANDER 02MY
Washer
The rear washer is operated by pressing the non-latching switch mounted on the RH side of 
the instrument pack. The washer will operate until the switch is released.
The rear wiper will start operating at slow speed as soon as the washer switch is depressed, 
and will continue to operate at slow speed for approximately 6 seconds after the switch is 
released.
OPERATION
Front
General
Feed from the positive battery terminal (C0192) is supplied to...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.109
Fast Wipe
Fuse 3 of the passenger compartment fuse box (C0580) provides an ignition feed to the 
wiper switch (C0035) on a G wire. When the wiper switch is moved to the fast wipe position, 
current flows across the switch (C0035) to the wiper motor (C0030) on a RG wire. Current 
flows across the motor fast speed windings and is earthed (C0030) on a B wire. 
Park
Fuse 3 of the passenger compartment fuse box (C0582) provides an ignition feed to the 
wiper...