Home
>
Land Rover
>
Automobile
>
Land Rover Defender 1999 2002my Workshop Supplement Body Repair 3rd Edition Rover Manual
Land Rover Defender 1999 2002my Workshop Supplement Body Repair 3rd Edition Rover Manual
Here you can view all the pages of manual Land Rover Defender 1999 2002my Workshop Supplement Body Repair 3rd Edition Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.
Page 631
86ELECTRICAL 22 DESCRIPTION AND OPERATION HEATED FRONT SEATS - FROM 02MY 1.LH and RH seat heater switches 2.Seat heater cushion and squab elements 3.Seat heat/Window lift relay (passenger compartment fuse box)
Page 632
ELECTRICAL 23 DESCRIPTION AND OPERATION Heated front seats are a new feature for 2002MY and are available as part of a cold climate pack on Td5 engine variants only. The heated seats system comprises, two latching switches, a seat relay and heater elements. The latching switches are located in the fascia. Each switch individually controls its related seat heater elements. Each switch contains a tell tale lamp to indicate when the seat heaters are active. There is no timer function for the seat heater...
Page 633
86ELECTRICAL 24 DESCRIPTION AND OPERATION ELECTRIC FRONT WINDOWS - FROM 02MY 1.LH and RH window lift switches 2.Motor and regulator assembly 3.Seat heat/Window lift relay
Page 634
ELECTRICAL 25 DESCRIPTION AND OPERATION Electric window lift is a new feature for 02MY. The electric windows are only available on the front driver and passenger doors. Rear passenger doors retain the manual window lift regulator mechanism. The window lift system comprises a window motor in each front door, two window lift switches located in the fascia switch panel and a relay, located adjacent to the passenger compartment fusebox. The windows are only operative when the ignition switch is in position...
Page 635
86ELECTRICAL 26 DESCRIPTION AND OPERATION PASSENGER COMPARTMENT FUSE BOX FROM 02MY The increase in electrical systems on Defender 02MY vehicles has necessitated an increase in the number of fuses required. The passenger compartment fuse box now contains three rows of fuses instead of the previous two rows and relays to control the CDL system, heated front screen, headlamps, anti-theft alarm ECU and seat heaters and window lift system. 1.Fuse 8 - Anti-theft alarm ECU/BBUS (10A) 2.Fuse 9 - Front wiper...
Page 636
ELECTRICAL 27 DESCRIPTION AND OPERATION UNDER SEAT FUSE BOX FROM 02MY 1.A/C Relay (if fitted) 2.A/C relay (if fitted) 3.Glow plug relay 4.Main relay 5.Fuel pump relay 6.ABS Return pump relay 7.Fuse 7 - Central Door Locking (CDL) and BBUS (20A) 8.Fuse 6 - Anti-theft alarm ECU (15A) 9.Fuse 5 - Main relay (30A)10.Fuse 4 - Fuel pump relay (20A) 11.Fuse 3 - Horn/HRW relay (20A) 12.Fuse 2 - Accessory socket (20A) 13.Fuse 1 - ABS ECU (30A) 14.Fusible link 6 - Lights (30A) 15.Fusible link 5 - Ignition...
Page 638
ELECTRICAL 1 ADJUSTMENT HEADLAMPS - ALIGN BEAM Service repair no - 86.40.17 Check 1.Align suitable beam setting equipment to headlamp. 2.Ensure headlamp height adjustment switch set to’O’and headlamps switch on. Headlamp setting = 1.2% below horizontal and parallel. Adjust 3.Align beam setting equipment to 2nd headlamp and adjust 2nd lamp as necessary. 4.Switch off headlamps. 5.Remove beamsetter.SOLENOID/MOTOR - FRONT DOOR - ADJUST Service repair no - 86.26.21 Adjust 1.Remove door trim casing.See CHASSIS...
Page 640
ELECTRICAL 1 REPAIR BELT - AUXILLARY DRIVE Service repair no - 86.10.03 Remove 1.Remove cooling fan.See COOLING SYSTEM, Repair. 2.Release drive belt tensioner using a 15 mm ring spanner and release belt from pulleys. Refit 3.Clean drive belt pulley grooves and ensure grooves are not damaged. 4.Fit new drive belt around pulleys, ensure belt is correctly aligned in pulley grooves. 5.With assistance, hold tensioner fully clockwise and fit drive belt around remaining pulley. 6.Fit cooling fan.See COOLING...