Home > Land Rover > Automobile > Land Rover Defender 1999 2002my Workshop Supplement Body Repair 2nd Edition Rover Manual

Land Rover Defender 1999 2002my Workshop Supplement Body Repair 2nd Edition Rover Manual

Here you can view all the pages of manual Land Rover Defender 1999 2002my Workshop Supplement Body Repair 2nd Edition Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.

Page 431

76CHASSIS AND BODY
2
REPAIR TRIM CASING - TAIL DOOR - UP TO 02MY
Service repair no - 76.34.09
Remove
1.Remove 2 bolts securing grab handle to tail
door.
2.Remove grab handle.
3.Remove 2 screws securing wiper motor cover.
4.Remove wiper motor cover.
5.Remove 7 screws securing trim casing to door.
6.Remove 2 screws securing wiper motor harness
cover.
7.Remove harness cover.
8.Release 7 of 8 trim studs securing trim casing.
9.Remove trim casing from remaining stud.
10.Collect door lock cover.Refit...

Page 432

CHASSIS AND BODY
3
REPAIR LATCH - TAIL DOOR - UP TO 02MY
Service repair no - 76.37.16
Remove
1.Remove tail door trim casing.See this Section.
2.Collect latch cover.
3.Remove 2 screws securing latch to door and
collect captive nut bracket.
4.Remove 2 nuts securing latch to door and collect
captive bolt bracket.
5.Remove latch assembly and collect foam
gasket.
Refit
6.Fit foam gasket and latch assembly to tail door.
7.Fit captive nut and bolt brackets to tail door.
8.Secure latch to tail door with nuts and...

Page 433

76CHASSIS AND BODY
4
REPAIR WING - FRONT
Service repair no - 76.10.24
Remove
1.Remove wheel arch liner.See this Section.
2.Remove front grille.See this Section.
3.Release fixings and remove cooling fan cowl.
4.Remove air cleaner grille from front wing.
5.Remove 4 screws securing air intake elbow to
wing.
6.Remove 7 screws and remove heater air intake
grille from wing.
7.Remove 2 bolts securing heater air intake
bracket to inner wing. Remove bracket.
8.Remove heater air intake from wing and collect
seal....

Page 434

CHASSIS AND BODY
5
REPAIR
13.Remove 4 bolts securing radiator mounting
bracket to wing.
14.Loosen screw and release bonnet lock inner
cable from bonnet lock.
15.Release bonnet lock outer cable from from
bonnet lock.
16.Push centre pins from studs securing wheel arch
extension to wing, remove studs and remove
wheel arch extension.
17.Remove bolt securing inner and outer wing to
chassis.
18.Remove nut and bolt securing support stay to
wing.
19.Remove 4 bolts securing wing to’A’post.
20.Remove bolt securing...

Page 435

76CHASSIS AND BODY
6
REPAIR
21.Disconnect headlamp, side lamp, repeater and
indicator multiplugs.
22.With assistance, remove wing.
23.Remove bolt, remove grille support bracket.
24.Remove 4 screws securing side and indicator
lamps.
25.Remove 2 screws securing headlamp finisher to
wing, remove finisher.
26.Remove 4 screws and remove headlamp from
wing, collect sealing ring.
27.Release side repeater lamp from wing.
28.Remove bonnet cable grommet. 

Page 436

CHASSIS AND BODY
7
REPAIR Refit
29.Fit bonnet cable grommet.
30.Fit side repeater lamp to wing.
31.Fit headlamp sealing ring, fit headlamp and
tighten screws.
32.Fit headlamp finisher, side and indicator lamps
and tighten screws.
33.Fit grille support bracket and tighten bolt.
34.With assistance, position and align wing to body
and locate bonnet cable to wing.
35.Connect headlamp, indicator, side lamp and side
repeater lamp multiplugs.
36.Fit bolt securing wing to bulkhead.
37.Fit bolts securing wing...

Page 437

76CHASSIS AND BODY
8
REPAIR LINER - FRONT WHEEL ARCH
Service repair no - 76.10.48
Remove
1.Raise front of vehicle.
WARNING: Support on safety stands.
2.Remove front wheel.
3.Support axle weight with jack.
4.Remove 6 screws securing damper top cover to
inner wing, remove cover.
5.Remove nut securing damper to top mounting
bracket and collect rubber bush and 2 washers.
6.Remove 4 nuts securing damper to mounting
bracket and collect washers.
7.Remove damper top cover.
8.Remove 4 screws and 3 studs securing...

Page 438

CHASSIS AND BODY
9
REPAIR FRONT BUMPER
Service repair no - 76.22.08
Remove
1.Remove 6 screws and remove front grille.
2.Remove 4 through bolts securing front bumper
to chassis longitudinals.
3.Remove front bumper.
Refit
4.Fit front bumper to chassis longitudinals and
secure with bolts.
5.Fit front grille and secure with screws.DOOR - REAR
Service repair no - 76.28.02.99
Remove
1.Remove nut securing door check strap.
2.With assistance remove 4 bolts securing door to
body and remove door.
Refit
3.With...

Page 439

76CHASSIS AND BODY
10
REPAIR DOOR - TAIL - REMOVE
Service repair no - 76.28.19.99
Remove
1.Remove 3 nuts and remove spare wheel.
2.Remove bolt securing check strap to body.
3.Release harness grommet from harness cover,
disconnect connectors and multiplug.
4.Release harness cover and harness from body.
5.With assistance, remove 6 screws securing door
hinges to body and remove door.
Refit
6.With assistance, position door and fit but do not
tighten bolts.
7.Position check strap and tighten bolt.
8.Align...

Page 440

CHASSIS AND BODY
11
REPAIR GLASS/SEALING RUBBER - TAIL DOOR - UP TO
02MY
Service repair no - 76.31.22
Remove
1.Remove high level stop lamp.See
ELECTRICAL, Repair.
2.Remove 3 nuts and remove spare wheel.
3.Raise cover, remove nut and remove rear wiper
arm assembly.
4.Disconnect 2 HRW Lucars.
5.Remove 30 screws securing door glass
retainers.
6.Remove door glass retainers.
7.Remove door glass sealing strips.
8.Release and remove door glass.Refit
9.Clean old sealant from glass aperture.
10.Apply sealant to...
Start reading Land Rover Defender 1999 2002my Workshop Supplement Body Repair 2nd Edition Rover Manual

Related Manuals for Land Rover Defender 1999 2002my Workshop Supplement Body Repair 2nd Edition Rover Manual

All Land Rover manuals