Land Rover Audio Navigation System Nas Rover Manual

Navigation operation
70
Select the measuring unit using the right rotary 
control. The measuring unit is accepted by 
pressing the control. 
The system returns to the system settings menu.
NOTE: METRIC indicates calculation in metres. 
IMPERIAL indicates calculation in feet.
NAVIGATION SYSTEM
TPCDRadNav
ICE 0373 

71
User menu
REQUESTING/QUITTING THE USER MENU  . . . . . . 76
GAL setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
LED setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Setting reception optimization (M/S) . . . . . . . . 77
Setting navigation announcements (Nav)  . . . . 78
Compass display . . . . . . . . . . . . . . . . . . . . . . . 78
Signal tone volume  . . . . . . . . . . . . . . . . . . . . . 79
MALFUNCTION RESET . . . . . . . . . . . . . . . . . . . . . . 79 

User menu
72
Us er m enuREQUESTING/QUITTING THE USER MENU
The user menu is requested by pressing the 
‘Tone’ button for more than 2 seconds.
After requesting the user menu, the following 
basic settings can be selected on two planes 
according to your personal preference.
The planes can be accessed by pressing the -> 
and 

73
User menu
LED setting
The flashing of the LED (flashes when unit is 
switched off) can be switched on or off using this 
function. 
Request the user menu. By pressing the 
multifunction button ‘Led’, select either ‘blinking’ 
(LED on) or ‘off’ (LED off).
The setting is stored automatically.
Setting reception optimization (M/S)
Two different reception optimization settings can 
be selected in order to suppress 
reception-dependent interference and 
reflections.
Request the user menu. By pressing the...

User menu
74
Setting navigation announcements (Nav)
With this function you can select how you wish 
to hear navigation announcements.
For selection, request user menu then press the 
-> multifunction button. Using the multifunction 
button ‘Nav’, select either ‘only’, ‘mixed’ or 
‘independ’.
The setting is stored automatically.
only: The audio source currently being listened to 
is switched off and only navigation 
announcements are heard. 
mixed: The volume level of the audio source 
currently being...

75
User menu
Signal tone volume
The volume of signal tones (e.g. storage 
confirmation) can be set using this function.
For selection, request user menu then press the 
-> multifunction button. Press the ‘BeV’ 
multifunctIon button. Using the right rotary 
control, select between ‘O’ (quiet) and ‘+5’ 
(loud).
The setting is stored automatically.
MALFUNCTION RESET
If a malfunction of the unit should occur, such 
that the unit is no longer capable of operation, or 
is defective in some other way, a restart...

User menu
76 

Index
77
C
Caring for your CD’s 29
CD changer operation 34
magazine load/unload 34
operational readiness 34
playing CD’s in the loaded magazine 34
CD player controls 31
fast forward/rewind 31
number of tracks and total playing time 32
random play 31
repeating a track 32
scan search 31
track skip - forwards/backwards 31
D
Disclaimer confirmation 40
Dynamic autostore 16
FM DAS transmitter search 16
MW, LW, SW transmitter search 16
scan search 17
E
Entering a destination 41
entering a road name 44
entering...

Index
78 Route guidance
cancelling 54
notes 54
Route guidance calculation 51
recalculating the route 51
Route menu 47
deleting stored destinations 50
destination memory full 51
entering the house number for the destination
road 47
select the intersection for the destination road 
48
selecting the route settings 48
storing a specified destination 50
S
Satellite navigation 37
digitised area 38
safety instructions 37
Selecting/storing FM frequencies
AM, LW autostore 19
AM, LW, SW manual tuning 20
FM manual...