Land Rover Audio Navigation System Nas Rover Manual

Navigation operation
50
Storing a specified destination in the 
destination memory
It is not absolutely necessary to store a 
destination in the destination memory for route 
guidance. It saves repeated manual entry, if the 
destination is required at a later date.
Select SAVE DESTINATION in the route menu 
and press the right rotary control to confirm.
Any name of your choice consisting of up to 14 
characters can be entered for the specified 
destination and then automatically only be stored 
in the...

51
Navigation operation
Destination memory full
This occurs when the destination memory is full.
Select either DELETE (to jump to the destination 
memory in order to delete a destination) or BACK 
(to cancel saving). 
ROUTE GUIDANCE CALCULATION
The message “Calculating route” indicates that 
the distance is being calculated, which may take 
several seconds. 
After the first route guidance announcement, the 
prompt CD flashes on the display until the route 
has been completely calculated. When entering a...

Navigation operation
52
Using the right rotary control, make a selection 
and press to confirm.
•DEST. MEMORY
select the stopover from the destInatIon 
memory.
•DESTINATION
enables the selection of special destinations 
as stopovers via NEARBY DESTINATION, 
NEARBY and TOWN, e.g.gas stations or 
airports.
Starting route guidance to a stopover
To start route guidance to the stopover, press the 
right rotary control.
The route is calculated and route guidance 
begins.
NOTE: The   symbol is displayed...

53
Navigation operation
To delete the stopover, press the right rotary 
control within 8 seconds. 
Stopover reached
Route guidance to the final destination 
automatically starts following the message “YOU 
HAVE REACHED YOUR STOPOVER”
TRAFFIC JAM FUNCTION
This function allows you to block the 
approaching route sections as from the next 
junction and calculate a bypass route when a 
traffic jam or road block is directly ahead.
Entering the length of a traffic jam
Press the multifunction button  .
Using...

Navigation operation
54
 is displayed inversely and the route is 
recalculated.
Delete block
Press the multifunction button 
To delete a block, press the right rotary control 
within 8 seconds.
CANCELLING ROUTE GUIDANCE
Press the ‘Nav’ button
Route guidance is cancelled by pressing the right 
rotary control within 8 seconds, otherwise, route 
guidance continues.
NOTES ON ROUTE GUIDANCE
After entering the destination (address), the 
system calculates the route and announces: “We 
can start now”. 
The...

55
Navigation operation
The display appears for 8 seconds after pressing 
the right rotary control.
Danger! If a driving recommendation 
contradicts the applicable Road Traffic 
Regulations (RTR), the RTR is always valid!
For clarification, there follows a selection of 
examples of possible driving recommendations:
•“Please perform a U-turn if possible”.
You are driving In the wrong dIrectIon and 
should turn back at the earlIest opportunIty.
•Please turn right after 1/4 mile”. 
The arrow indicator...

Navigation operation
56
•“Please leave the traffic circle at the third exit 
on the right”.
This display shows you which exit (marked with 
the arrow) you must take at the traffic circle.
•“Now drive straight ahead”
At this point, you must drive straight ahead. •“Please follow the directIon arrows”.
This display tells you that you are in a 
non-digitised street (e.g. car park, garage), 
which is not included in the digital street map. 
The arrow indicates the direction of the 
destination as the crow...

57
Navigation operation
•“You have reached your destination”. 
The destination specified is reached and route 
guidance is terminated.INFORMATION DURING ROUTE GUIDANCE
Press the left rotary control.
The destination, the distance and the estimated 
time of arrival are dIsplayed.
If a stopover has been specified, the stopover, 
the distance and estImated tIme of arrival are 
displayed.
The main destination can be displayed via the 
multifunction button  .
Press the multifunction button on the far left to...

Navigation operation
58
Requesting journey duration and distance 
travelled
During route guidance, press the left rotary 
control.
Press the multifunction button  .
The journey duration, distance travelled and the 
average speed are displayed. Pressing the right 
rotary control or the ‘Nav’ button, returns to the 
route guidance display.
The information for journey duration, distance 
travelled and the average speed can be requested 
as previously described, provided that the 
destination flag waves...

59
Navigation operation
Requesting current time
During route guidance, press the left rotary 
control. Press the   multifunction button.
The current time is displayed. After 8 seconds, 
the system returns to the route guidance display.
Requesting current position
During route guidance, the current position can 
be requested.
Press the multifunction button  .The current position with road name 
(if available), degrees of longitude and latitude 
and the number of satellites received are 
displayed. 
By...