Land Rover Audio Navigation System Nas Rover Manual

Navigation operation
40
Confirm warning
Before you can use the navigation system, a 
warning appears.
If you confirm the receipt of this warning you 
state that you have read and understood the user 
guide and that you are aware of the dangers 
connected to the use of this navigation 
equipment.
Selecting navigation
Press the ‘Nav’ multifunctIon button. 
The main navigation menu appears after thIs 
dIsplay. 
NOTE: The navigation CD must be loaded when 
starting navIgatIon operation for the first time
If...

41
Navigation operation
Main navigation menu
Selection from:
DESTINATION
DEST. MEMORY
P. O. I.
LAST DESTINATIONS
can be made by turning the right rotary control 
and confirmed by pressing the right rotary 
control.
•DESTINATION
accesses the entry menu for the destination.
•DEST. MEMORY
contains destinations which have been stored 
previously
•P. O . I .
Menu for the selection of special local and 
inter-regional destinations and special 
destinations nearby. Special destinations are 
e.g. gas stations,...

Navigation operation
42
Updating software
Each navigation CD you use has its own software 
included and the navigation unit reads and 
downloads that software whenever you insert a 
different CD.
When a different CD is inserted into the unit you 
will be prompted to select EXECUTE UPDATE 
using the right rotary control and press to 
confirm.
The system now checks radio and navigation 
software and loads all data required for further 
navigation. The display will show a progress bar. 
After a short delay...

43
Navigation operation
Letters which are already entered are displayed 
inversely. The unit offers only the possible 
remaining letters for selection. If no other entries 
are available, the unit completes the place-name 
automatically.
To accept the entry, press and hold the right 
rotary control for more than 2 seconds or select 
the small tick and briefly press the right rotary 
control.
If the complete place-name was previously 
entered or was automatically completed, the 
program switches to either...

Navigation operation
44
Entering a street name
Using the right rotary control, select STREET and 
press to confirm. At this point one of two 
methods can be used to find a street.
1.Select the first 2 or 3 letters of the street 
name, one after the other, by turning the 
right rotary control and pressing to confirm. 
When confirming the second or third letter, 
press and hold the control for more than 2 
seconds. An alphabetical street list is 
displayed. Scroll the list to find the desired 
street name...

45
Navigation operation
The street nearest to the entry appears in capital 
letters in the street selection list. 
The scroll marks indicate that more streets are 
available for selection in alphabetical order. 
Select the street by turning the right rotary 
control and press to confirm.
If the entry is unequivocal, the program switches 
to route menu.
The street distinguishing list is displayed if the 
selection is ambiguous.
Select the required place using the right rotary 
control and press to...

Navigation operation
46
Select the letters one after the other by turning 
the right rotary control and press to confirm. The 
enlarged selected letter appears at the right of the 
display. 
Using the multifunction button   the last 
confirmed letter is deleted.
The complete entry is deleted if the multifunction 
button   is pressed for more than 2 seconds.
Letters which are already entered are displayed 
inversely. The unit offers only the possible 
remaining letters for selection. If no other entries...

47
Navigation operation
ROUTE MENU
Selection from
•SAVE DESTINATION
•START-FAST R., START-SHORT R.
•HOUSE NUMBER
•CROSSING
•ROUTE SETTING
can be made by turning, and confirmed by 
pressing the right rotary control.
•SAVE DESTINATION
accesses the entry menu for the destination 
memory.
•START-FAST R., START-SHORT R. 
starts route guidance. Simultaneously, a 
prompt appears indicating the currently 
selected route option (-SHORT R. for a short 
route, -FAST R. for a fast route).
•HOUSE NUMBER
The house...

Navigation operation
48
Select the intersection for the destination 
street
Using the right rotary control, select CROSSING 
in the route menu and press to confirm.
Select the intersection for the destination street 
by turning the right rotary control and press to 
confirm the selection.
Select START- to start route guidance.
Select SAVE DESTINATION to jump to the 
destination memory menu. 
Select ROUTE SETTINGS to access the possible 
route settings.
Select by turning the right rotary control and...

49
Navigation operation
•RESTRICTIONS
Provides options for avoiding highways, 
ferries or toll roads.
Selection can be made by turning the right rotary 
control, and settings can be changed by pressing 
the right rotary control.
Press the control for more than 2 seconds to 
accept all settings and quit the menu.
NOTE: Routes without highways can only be 
calculated for short distances (up to 120 miles).
NOTE: It is possible that routes without the use 
of interstate highways may not be calculable. In...