Land Rover Audio Navigation System Nas Rover Manual

							Navigation operation
70
Select the measuring unit using the right rotary 
control. The measuring unit is accepted by 
pressing the control. 
The system returns to the system settings menu.
NOTE: METRIC indicates calculation in metres. 
IMPERIAL indicates calculation in feet.
NAVIGATION SYSTEM
TPCDRadNav
ICE 0373 
						

							71
User menu
REQUESTING/QUITTING THE USER MENU  . . . . . . 76
GAL setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
LED setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Setting reception optimization (M/S) . . . . . . . . 77
Setting navigation announcements (Nav)  . . . . 78
Compass display . . . . . . . . . . . . . . . . . . . . . . . 78
Signal tone volume  . . . . . . . . . . . . . . . . . . . . . 79
MALFUNCTION RESET . . . . . . . . . . . . . . . . . . . . . . 79 
						

							User menu
72
Us er m enuREQUESTING/QUITTING THE USER MENU
The user menu is requested by pressing the 
‘Tone’ button for more than 2 seconds.
After requesting the user menu, the following 
basic settings can be selected on two planes 
according to your personal preference.
The planes can be accessed by pressing the -> 
and 
						

							73
User menu
LED setting
The flashing of the LED (flashes when unit is 
switched off) can be switched on or off using this 
function. 
Request the user menu. By pressing the 
multifunction button ‘Led’, select either ‘blinking’ 
(LED on) or ‘off’ (LED off).
The setting is stored automatically.
Setting reception optimization (M/S)
Two different reception optimization settings can 
be selected in order to suppress 
reception-dependent interference and 
reflections.
Request the user menu. By pressing the 
multifunction button ‘M/S’, select either ‘Stereo’, 
‘Mono’ or ‘Auto’.
Auto: Setting for normal operation - i.e., the 
system switches from stereo to mono and back, 
depending upon reception location (provides the 
optimum setting for almost all reception areas).
Stereo: Setting for exceptIonal receptIon 
condItIons - i.e. the unit is constantly set to 
stereo.
Mono: Setting for reception conditions in which 
reflections constantly occur - I.e., the unIt is set 
constantly to mono.
The setting is effective immediately and is also 
retained on switching off. 
NAVIGATION SYSTEM
TPCDRad
Nav
ICE 0281
NAVIGATION SYSTEM
TPCDRad
Nav
ICE 0280 
						

							User menu
74
Setting navigation announcements (Nav)
With this function you can select how you wish 
to hear navigation announcements.
For selection, request user menu then press the 
-> multifunction button. Using the multifunction 
button ‘Nav’, select either ‘only’, ‘mixed’ or 
‘independ’.
The setting is stored automatically.
only: The audio source currently being listened to 
is switched off and only navigation 
announcements are heard. 
mixed: The volume level of the audio source 
currently being listened to is decreased. The 
navigation announcement is set to the same 
volume level as the previously heard audio 
source, but still adjustable within a range of 
+/-6 dB. If the audio source volume is then 
changed, the navigation announcement volume 
is adjusted accordingly.
independ: The audio source being listened to and 
the navigation announcement can be set to 
various levels. 
Land Rover suggest that ‘independ’ be set for 
best all-round performance.
Compass display
If route guidance is not active, it is possible to 
display a compass on the right side of the 
display.
For selection, request user menu then press the 
-> multifunction button. 
Using the multifunction button ‘Cmp’, select 
either ‘Show compass’ (compass is displayed) or 
‘Hide compass’ (compass is not displayed). 
If the compass display is switched off, 
9 multifunction buttons are assigned transmitter 
abbreviations in FM - DAS mode (route guidance 
not active).
The setting is stored automatically. 
NAVIGATION SYSTEM
TPCDRad
Nav
ICE 0282
NAVIGATION SYSTEM
TPCDRad
Nav
ICE 0283 
						

							75
User menu
Signal tone volume
The volume of signal tones (e.g. storage 
confirmation) can be set using this function.
For selection, request user menu then press the 
-> multifunction button. Press the ‘BeV’ 
multifunctIon button. Using the right rotary 
control, select between ‘O’ (quiet) and ‘+5’ 
(loud).
The setting is stored automatically.
MALFUNCTION RESET
If a malfunction of the unit should occur, such 
that the unit is no longer capable of operation, or 
is defective in some other way, a restart of the 
unit software (reset) can be triggered.
In order to trigger a reset, press the ‘1’ and the ‘3’ 
multifunction buttons and the ‘TP’ button 
simultaneously. The navigation CD must be 
inserted after a reset of the unit.
NAVIGATION SYSTEM
TPCDRad
Nav
ICE 0284 
						

							User menu
76 
						

							Index
77
C
Caring for your CD’s 29
CD changer operation 34
magazine load/unload 34
operational readiness 34
playing CD’s in the loaded magazine 34
CD player controls 31
fast forward/rewind 31
number of tracks and total playing time 32
random play 31
repeating a track 32
scan search 31
track skip - forwards/backwards 31
D
Disclaimer confirmation 40
Dynamic autostore 16
FM DAS transmitter search 16
MW, LW, SW transmitter search 16
scan search 17
E
Entering a destination 41
entering a road name 44
entering the destination centre 45
entering the location 42
Entering the code number 6
G
General operation
activating the tone menu 10
adjusting the volume 10
balance setting 11
bass setting 10
fader setting 10
linear setting 11
switch on/off 10
switching loudness on/off 11
treble setting 10
I
Information during route guidance 57
destination memory 60
displaying the route settings 58
request current time 59
requesting current position 59
requesting the road list 60
Inserting/ejecting CD’s 30
M
Malfunction reset 75
N
Navigation
general notes 39
main navigation menu 41
selecting 40
Navigation operation
safety instructions 36
P
Portable panel
inserting 8
removing 7
Programme type selection 18
switching PTY display on/off 18
PTY Programme type 18
R
Radio operation
activating the radio menu 14
manual tuning 20
selecting the AM waveband 15
selecting the FM waveband 14
selecting/storing frequencies 19
setting options for frequency selection 15
switching on the radio 14
Radio/cassette player
remote controls 3
RDS system 14
Regionalisation 21
switching frequency display on/off 22
switching regionalisation on/off 22
Remote controls (radio) 3
Requesting journey duration and distance trav-
elled 58 
						

							Index
78 Route guidance
cancelling 54
notes 54
Route guidance calculation 51
recalculating the route 51
Route menu 47
deleting stored destinations 50
destination memory full 51
entering the house number for the destination
road 47
select the intersection for the destination road 
48
selecting the route settings 48
storing a specified destination 50
S
Satellite navigation 37
digitised area 38
safety instructions 37
Selecting/storing FM frequencies
AM, LW autostore 19
AM, LW, SW manual tuning 20
FM manual fine tuning 20
selecting/storing AM, LW, SW frequencies 19
storing 19
Special destinations 61
Stopover 51
deleting a stopover 52
entering a stopover 51
starting route guidance to a stopover 52
stopover reached 53
Switching radio text display on/off 22
System settings 66
animations 68
requesting the position 68
saving the position 67
setting the language 68
setting the measuring unit 69
setting the time 66
switching announcement of the ETA on/off 69
T
Temperature protection 32
Traffic jam function 53Traffic jam funtion
delete block 54
entering the length of a traffic jam 53
Traffic programme (TP) 23
activating/quitting the TP menu 23
interrupting TP announcements 25
setting automatic tracking 23
setting/deleting direct programming 24
switching mute function on/off 24
switching off TP 24
TP announcement volume 25
U
Updating software 42
User menu
compass display 74
GAL setting 72
LED setting 73
requesting/quitting the user menu 72
setting navigation announcements 74
setting reception optimization 73
signal tone volume 75