Land Rover Audio Navigation System Nas Rover Manual
Have a look at the manual Land Rover Audio Navigation System Nas Rover Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
General operation 10 Ge nera l ope rat io nSWITCH ON/OFF Press the ‘ON’ button. Additional options for switching on / off: Via ignition: In order to switch on via the ignition, the unit must have been switched off previously via the ignition. With the ignition switched off, the unit can also be switched on via the ON button. The unit switches off automatically after 1 hour. To deactivate the unit, either switch off the ignition or press the ‘ON’ button. ADJUSTING THE VOLUME Turn the left rotary adjustment control. The volume is increased or decreased. ACTIVATING THE TONE MENU Press the ‘TONE’ button and the tone menu is activated. The following functions can be requested: Bas (Bass) Trb (Treble) Bal (Balance) Fad (Fader) Flt (Linear setting) Ldn (Loudness)Select function by pressing the required multifunction button. Set desired level with right rotary control and press to confirm. (Level set will remain in memory). Settings for the bass, treble, fader, balance and loudness are stored separately for MW, LW, SW, FM and for traffic announcements, navigation, CD and CDC operation. Bass setting Press the ‘TONE’ button and then the multifunction button ‘Bas’. Set the desired bass level using the right rotary control. Treble setting Press the ‘TONE’ button and then the multifunction button ‘Trb’. Set the desired treble level using the right rotary control. Fader setting Press the ‘TONE’ button and then the multifunction button ‘Fad’. Use the right rotary control for the desired fader setting. NAVIGATION SYSTEM TPCDRad Nav ICE 0242 ICE 0226 ICE 0227 ICE 0228
11 General operation Balance setting Press the ‘TONE’ button and then the multifunction button ‘Bal’. Set the desired balance level using the right rotary control. Linear setting Briefly press the ‘Tone’ button. Press the multifunction button ‘Flt’ (Tone flat is displayed). By pressing the multifunction button ‘Flt’ again the tone settings for the currently selected signal source (e.g. FM) are set to an average value. SWITCHING LOUDNESS ON/OFF Press the ‘Tone’ button and then the multifunction button ‘Ldn’. Using the multifunction button ‘Ldn’, you can select either loudness on (ON) or loudness off (OFF). Loudness is switched off in MW, LW and SW wavebands. ICE 0229 ICE 0231 ICE 0230
13 Radio operation RDS SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 DAS Seek Qual. plane . . . . . . . . . . . . . . . . . . . 14 DAS Seek Name plane . . . . . . . . . . . . . . . . . . . 14 Station RDS plane . . . . . . . . . . . . . . . . . . . . . . 14 Stations Fix plane. . . . . . . . . . . . . . . . . . . . . . . 14 SWITCHING ON THE RADIO . . . . . . . . . . . . . . . . . . 14 ACTIVATING THE RADIO MENU . . . . . . . . . . . . . . . 14 Selecting the FM waveband . . . . . . . . . . . . . . . 14 Selecting the AM waveband . . . . . . . . . . . . . . . 15 Setting options for frequency selection . . . . . . 15 DYNAMIC AUTOSTORE (FM DAS) . . . . . . . . . . . . . 16 FM DAS transmitter search . . . . . . . . . . . . . . . 16 MW, LW, SW transmitter search . . . . . . . . . . . 16 Scan search . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PTY (PROGRAMME TYPE) . . . . . . . . . . . . . . . . . . . 18 Programme type selection . . . . . . . . . . . . . . . . 18 Switching PTY display on/off . . . . . . . . . . . . . . 18 SELECTING/STORING FREQUENCIES . . . . . . . . . . 19 FM frequencies . . . . . . . . . . . . . . . . . . . . . . . . 19 Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 AM, LW, SW frequencies . . . . . . . . . . . . . . . . . 19 AM, LW autostore . . . . . . . . . . . . . . . . . . . . . . 19 MANUAL TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . 20 FM fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . 20 AM, LW, SW . . . . . . . . . . . . . . . . . . . . . . . . . . 20 REGIONALISATION . . . . . . . . . . . . . . . . . . . . . . . . 21 Switching regionalisation on/off . . . . . . . . . . . 22 Switching frequency display on/off . . . . . . . . . 22 Switching radio text display on/off. . . . . . . . . . 22 TRAFFIC PROGRAMME (TP) . . . . . . . . . . . . . . . . . 23 Activating/quitting the TP menu. . . . . . . . . . . . 23 Switching on Tp. . . . . . . . . . . . . . . . . . . . . . . . 23 Setting/deleting direct programming . . . . . . . . 24 Switching off TP . . . . . . . . . . . . . . . . . . . . . . . 24 Switching mute function on/off . . . . . . . . . . . . 24 Interrupting TP announcements . . . . . . . . . . . 25 TP announcement volume . . . . . . . . . . . . . . . . 25
Radio operation 14 Ra dio ope rat io nRDS SYSTEM This car radio is capable of receiving RDS signals (RDS = Radio Data System) in the VHF range. RDS is a technique which enables the transmission of inaudible additional information in the VHF broadcasting range. This means that the transmitter broadcasts information which can be evaluated by the car radio. DAS Seek Qual. plane In the ‘DAS Seek Qual’ plane, all receivable and identifiable RDS programmes are alphabetically arranged in a list according to quality. The dynamic autostore, search and scan search functions fall back upon this list. DAS Seek Name plane In the ‘DAS Seek Name’ plane, all receivable and identifiable RDS programmes are alphabetically arranged in a list according to name. The dynamic autostore, search and scan search functions fall back upon this list. Station RDS plane In the ‘Stations RDS’ plane, only identified RDS stations can be stored. The unit constantly switches to the best receivable transmission frequency for the station. During the search on ‘Stations RDS’ the unit only stops at identifiable stations. Stations Fix plane In the ‘Stations Fix’ plane, frequencies can be assigned to the station buttons. RDS evaluation does not take place. The search on ‘Stations Fix’ is applicable to FM manual tuning only. SWITCHING ON THE RADIO Press the ‘RAD’ button to select radio mode. The radio is set to the previously selected waveband. ACTIVATING THE RADIO MENU To select the radio menu, press the “Rad” button again. The radio menu is switched on and displayed. The unit switches back to radio mode if no button is pressed within the next 8 seconds. Selecting the FM waveband In radio menu mode, press the ‘FM’ multifunction button. The last selected frequency and graphics are displayed. NAVIGATION SYSTEM TPCDRadNav ICE 1243 NAVIGATION SYSTEM TPCDRadNav ICE 1244
15 Radio operation By pressing the ‘FM’ multifunction button repeatedly, the graphics: ‘DAS, Seek QuaI’, ‘DAS Seek Name’, ‘Stations RDS’ and ‘Stations Fix’ can be selected. Selecting the AM waveband In the radio menu, press the ‘AM’ multifunction button. The last selected waveband and frequency are set. To select the wavebands MW (Medium Wave), LW (Long Wave) and SW (Short Wave), press the multifunction button ‘AM’ repeatedly until the required waveband is selected. Setting options for frequency selection The desired transmitter can be selected via dynamic autostore (FM), autostore (MW, LW), frequency search, manual tuning and station buttons. NAVIGATION SYSTEM TPCDRadNav ICE 0234
Radio operation 16 DYNAMIC AUTOSTORE (FM DAS) In radio menu mode, press the ‘FM’ multifunction button repeatedly until ‘DAS Seek Qual’ or ‘DAS Seek Name’ is displayed. After 8 seconds, the screen will display the receivable frequencies according to the setting via the multifunction buttons. If programmes broadcast by the transmitter you are tuned to have previously been stored, the last stored programme entry will be automatically selected. Set the desired frequency by pressing the button directly below the abbreviated station designation. If the selected transmitter broadcasts several programmes/regional programmes, a submenu is automatically displayed for 8 seconds, allowing further selection if so desired.The multifunction button → indicates that the button can be pressed for displaying and selecting additional transmitters. When using the unit for the first time, or following interruption of the power supply, allow a brief waiting period so that the receiver can evaluate the transmitter signals. The display will appear incrementally as the evaluation progresses. FM DAS transmitter search Turn the rotary selection control to the left/right. The radio displays the receivable and identified transmitters in descending/ascending order. MW, LW, SW transmitter search In the desired waveband (MW, LW, SW), turn the rotary selection control the left/right. The radio searches for reception frequencIes In descendIng/ ascendIng order of frequency. NAVIGATION SYSTEM TPCDRadNav ICE 1245 NAVIGATION SYSTEM TPCDRadNav ICE 1246
17 Radio operation Scan search First select the desired waveband (FM, MW, LW, SW) then press the rotary selection control. SC is displayed before the automatic frequency search is started. The first run is performed on an insensitive plane, all further runs on a sensitive plane. Receivable frequencies can be heard for 8 seconds before the search facility moves onto the next frequency. Press the rotary selection control if the received programme should be retained. NOTE: For FM DAS the scan search is performed in alphabetical order. NAVIGATION SYSTEM TPCDRadNav ICE 1247
Radio operation 18 PTY (PROGRAMME TYPE) Specific types of programme, such as e.g. sport, pop music, classical music etc., can be selected using the PTY function. The PTY is broadcast by the RDS transmitter, provided that the transmitter is equipped with this function. The selected transmitter programme type can be displayed or a search for a specific PTY transmitter can be performed. Examples of programme types are: NEWS News services POP M Pop music AFFAIRS Politics and current affairs ROCK M Rock music INFO Special word programme SCIENCE Science EDUCATE Learning and further education LIGHT M Light music DRAMA Radio plays and literature CLASSICS Classical music CULTURE Culture, church and society EASY M Easy listening VARIED Light entertainment SPORT Sport OTHER M Special music programmes WEATHER Weather report FINANCE Financial information CHILDPRG Childrens programmes SOCIAL Social reports RELIGION Religious reports PHONE IN Interviews TRAVEL Travel reports LEISURE Leisure reports JAZZ Jazz music COUNTRY Country music NATION M National folk music OLDIES Oldies DOCUMENT Documentaries NO PTY No PTY Programme type selection In radIo menu mode, press the ‘Pty’ multifunction button then, using the multifunction button ‘Pty’, select the programme type. The extent of programme types is limited to those available through local transmitters. Once PTY is operational, only those transmitters that are equipped with PTY can be selected in FM DAS mode. By selecting ‘NO PTY’, all transmitters will be re-displayed in FM DAS mode. Switching PTY display on/off Select radio menu. Using the multifunction button ‘Dis’ select either PTY (PTY display switched on) or Frequenc (PTY display switched off). NAVIGATION SYSTEM TPCDRadNav ICE 1249
19 Radio operation SELECTING/STORING FREQUENCIES FM frequencies Select radio menu. Use repeated pressings of the multifunction button ‘FM’, ‘Stations RDS’ or ‘Stations Fix’. Press ‘Rad’ to display the frequency display graphic. Storing Twelve frequencies or programmes can be stored per waveband. To store a selection, first tune to the desired station. Choose a multifunction button on which to store your selection (1-6 or 7-12) and press until a signal tone soundsThe station is now stored and can be accessed again by pressing the same button. Buttons 7-12 can be accessed by pressing the -> button. Return to buttons 1 - 6 by pressing the