Land Rover Audio Navigation System Nas Rover Manual

							Navigation operation
60
The geographic position is displayed. Pressing 
the right rotary control or the ‘Nav’ button 
returns to the information menu.
Requesting the street list
During route guidance, the planned route list can 
be requested.
Press the multifunction button  .The current street and the street names up to the 
destination are displayed. The route list can be 
scrolled by turning the right rotary control.
By pressing the right rotary control, the program 
returns to the route guidance display. 
NOTE: After destination entry, there is a short 
delay until the route list is created. 
If the vehicle is “off road” at the moment of 
destination entry, the route list cannot be created 
until a stored road is reached.
Destination memory
Using the right rotary control, select 
DEST. MEMORY in the main navigation menu 
and press to confirm.
The destination memory contains personally 
stored destinations. Once stored, manual entry 
of the destination is no longer necessary.
NAVIGATION SYSTEM
TPCDRadNav
ICE 0929
NAVIGATION SYSTEM
TPCDRadNav
ICE 1274
NAVIGATION SYSTEM
TPCDRadNav
ICE 1223
NAVIGATION SYSTEM
TPCDRadNav
ICE 0347 
						

							61
Navigation operation
Select the destination using the right rotary 
control and press to confirm.
Then start route guidance.
SPECIAL DESTINATIONS
Menu for selecting special destinations from a 
specified list. 
SpecIal destinatIons are e. g. gas statIons, 
aIrports, hospitals etc.
Using the right rotary control, select P. 0. I. from 
the main navigation menu and press to confirm.Points of Interest, NEARBY DESTINATION/ 
NEARBY.
Special destinations in the current surrounding 
area of the vehicle or special destinations near 
the destination can be selected. Using the right 
rotary control, make a selection and press to 
confirm.
Using the right rotary control select a category 
and press to confirm.
NAVIGATION SYSTEM
TPCDRadNav
ICE 0348
NAVIGATION SYSTEM
TPCDRadNav
ICE 0349
NAVIGATION SYSTEM
TPCDRadNav
ICE 1224
NAVIGATION SYSTEM
TPCDRadNav
ICE 0351 
						

							Navigation operation
62
Destinations are listed according to proximity. 
The figures in miles relate to the direct distance 
(as the crow flies) between the special 
destination and the current location.
The arrows following the dIstance informatIon 
indicate the distance as the crow flies to the 
relevant special destination (e.g.↑ special 
destination lies in the direction of travel, 
↓ special destination lies in the opposite 
direction to that of travel). 
Select the desired destination using the right 
rotary control.
By pressing the left rotary control, information 
selected destination is listed (e-g. a hospital). 
Confirm the selection using the right rotary 
control.
The system jumps to the route menu. NOTE: If you select the category RESTAURANT, 
another sub menu appears.
If you select by BY NAME, all available retaurants 
will be displayed in a scroll list. If there are more 
than 9 items in the list, you will be prompted to 
enter text.
Enter the retaurant name and confirm. Confirm 
your choice in the selection list by pressing the 
right rotary control.
If you select BY FOOD TYPE , the display will 
show a list of different ethnic foods e.g. Chinese.
NAVIGATION SYSTEM
TPCDRadNav
ICE 0352
NAVIGATION SYSTEM
TPCDRadNav
ICE 0353
NAVIGATION SYSTEM
TPRadNavCD
ICE 1284
NAVIGATION SYSTEM
TPRadNavCD
ICE 1285 
						

							63
Navigation operation
Select the desired category and confirm by 
pressing the right rotary control. If there is more 
than one choice in the category selected, the 
display will show the available retaurants. Make 
your selection and confirm to start navigation.•Points of Interest. TOWN/NATIONWIDE
Special destinations contained in the 
navigation CD can be selected.
Using the right rotary control, select TOWN and 
press to confirm.
Using the right rotary control, select either 
TOWN or NATIONWIDE and press to confirm.
NAVIGATION SYSTEM
TPRadNavCD
ICE 1286
NAVIGATION SYSTEM
TPCDRadNav
ICE 1224
NAVIGATION SYSTEM
TPCDRadNav
ICE 1225 
						

							Navigation operation
64
Selecting TOWN
Using the right rotary control, select TOWN and 
press to confirm
Using the selection process descibed in ‘Entering 
the location’, select the town and press to 
confirm.
Then select the town from the town selection list 
using the right rotary control and press again to 
confirm.
Special destinations for the selected town are 
displayed.
Using the right rotary control, select a category 
and press to confirm.
A list with special destinations is displayed or if 
there are more than 9 entries in the list, you will 
be requested to enter text.Enter the special destination and confirm by 
pressing the right rotary control.
The system jumps to the route menu. 
NOTE: A list of possible special destinations is 
displayed by pressing the right rotary control for 
more than 2 seconds without having selected 
any letters.
NAVIGATION SYSTEM
TPCDRadNav
ICE 0289
NAVIGATION SYSTEM
TPCDRadNav
ICE 0351
NAVIGATION SYSTEM
TPCDRadNav
ICE 1226 
						

							65
Navigation operation
Selecting NATIONWIDE
Using the right rotary control, select 
NATIONWIDE and press to confirm.
A list with special destinations is displayed or if 
there are more than 9 entries in the list, you will 
be requested to enter text.
Enter the special destination and confirm by 
pressing the right rotary control.
The system jumps to the route menu. NOTE: A list of possible special destinations is 
displayed by pressing the right rotary control for 
more than 2 seconds without having selected 
any letters.
NAVIGATION SYSTEM
TPCDRadNav
ICE 1227
NAVIGATION SYSTEM
TPCDRadNav
ICE 1226
NAVIGATION SYSTEM
TPCDRadNav
ICE 1228 
						

							Navigation operation
66
SYSTEM SETTINGS
In the main navigation menu, press and hold the 
‘Nav’ button.
The system settings menu is requested.
Selection from
•TIME
•SAVE POSITION
•* LANGUAGE
•ANIMATIONS
•MEASURING UNIT
•ANNOUNCEMENT ETA
can be made by turning the rotary control and 
then confirmed with a press of the control. 
•TIME
The internal system clock can be set to local 
time.
•SAVE POSITION
The current position can be saved and stored 
in the destination memory.
•*LANGUAGE
Language setting for the navigation system.
•ANIMATIONS
The display animations can be switched on or 
off.•MEASURING UNIT
The display units can be changed from 
metres to feet. 
•ANNOUNCEMENT ETA
Announcement of the estimated time of 
arrival can be switched on / off.
Setting the time
In order to calculate the estimated time of arrival, 
it is necessary to set the GMT time transmitted 
from satellites to the current time zone.
With the right rotary control select TIME in the 
system settings menu and press to confirm.
Using the multifunction button the time can be 
changed from the 24 hour to the 12 hour displayNAVIGATION SYSTEM
TPCDRadNav
ICE 1287
NAVIGATION SYSTEM
TPCDRadNav
ICE 1288
NAVIGATION SYSTEM
TPCDRad
Nav
ICE 0359 
						

							67
Navigation operation
Using the multifunction buttons + or - the time is 
adjusted by half an hour.
By pressing the right rotary control or the 
multifunction button ‘OK’ the time set is 
accepted. The program returns to the system 
settings menu.
Saving your position
Select SAVE POSITION in the system settings 
menu and confirm. The current co-ordinates (degrees of longitude 
and latitude) are displayed.
Confirm again by pressing the right rotary 
control. 
Enter the name of the position.
Press the right rotary control for more than 2 
seconds to confirm the name entered.
Alternatively, select the small tick and then briefly 
press the right rotary control.
The destination memory is automatically 
requested.
Select the desired position in the destination 
memory using the right rotary control and press 
to confirm.
NAVIGATION SYSTEM
TPCDRad
Nav
ICE 0360
NAVIGATION SYSTEM
TPCDRadNav
ICE 1289
NAVIGATION SYSTEM
TPCDRadNav
ICE 0362
NAVIGATION SYSTEM
TPCDRadNav
ICE 0309 
						

							Navigation operation
68
Requesting the position
Request the destination memory and select 
destination using the right rotary control.
If the position is outside a digitised area, the 
driver is guided to the dIgitised route nearest to 
the destination. The announcement “Your 
destination is nearby” is given. The direction of 
the arrows must be followed in order to reach the 
destination.
Setting the language
Select *LANGUAGE in the system settings menu 
and confirm.
Select the language using the right rotary 
control. The language selection is accepted by 
pressing the control and the language is 
installed.
You can choose either a male or a female voice 
for certain languages.Select the voice using the right rotary control. 
The voice is accepted and installed by pressing 
the control. 
The system returns to the system settings menu 
after installation.
NOTE: In every language, the menu entry 
LANGUAGE is preceded an asterisk (*) i.e. 
*LANGUAGE. This enables you to recognise the 
menu entry in the System Settings no matter 
what the previously set language is.Animations
Select ANIMATIONS in the system settings menu 
and confirm.
NAVIGATION SYSTEM
TPCDRadNav
ICE 1276
NAVIGATION SYSTEM
TPCDRadNav
ICE 0366
NAVIGATION SYSTEM
TPCDRadNav
ICE 1277
NAVIGATION SYSTEM
TPCDRadNav
ICE 1278 
						

							69
Navigation operation
It is possible to select between animations ON 
and OFF by briefly pressing the right rotary 
control.
Press and hold the right rotary control to accept 
the setting. 
The system returns to the system settings menu.
Switching announcement of the estimated 
time of arrival on/off
Select ANNOUNCEMENT ETA in the system 
settings menu and confirm.
ETA stands for Estimated Time of Arrival.It is possible to select between announcement 
ETA ON and OFF by briefly pressing the right 
rotary control.
Press and hold the right rotary control to accept 
the setting. 
The system returns to the system settings menu.
Setting the measuring unit
Select MEASURING UNIT in the system settings 
menu and confirm. 
NAVIGATION SYSTEM
TPCDRadNav
ICE 0369
NAVIGATION SYSTEM
TPCDRadNav
ICE 1290
NAVIGATION SYSTEM
TPCDRadNav
ICE 0371
NAVIGATION SYSTEM
TPCDRadNav
ICE 0372