Land Rover Anti Lock Control Traction Control Rover Manual

49CONTROL DIAGRAM..................................................................................................................................................
51Vehicle  Dynamic  Suspension.....................................................................................................................
52GENERAL......................................................................................................................................................................
54OPERATING...

102SERVICE........................................................................................................................................................................
102DIAGNOSTICS..............................................................................................................................................................
103ELECTRONIC REAR DIFFERENTIAL CONTROL DIAGRAM...............................................................................
104Parking...

132VACUUM PUMP (4.0L AND 4.4L)..............................................................................................................................
133VACUUM PUMP (2.7L DIESEL).................................................................................................................................
134VACUUM PUMP CONTROL DIAGRAM (4.0L AND 4.4L)......................................................................................
135Anti-Lock Control - Traction...

Front Suspension Component Layout
NOTE: Air suspension version shown
Flanged bolt (Upper control arm forward bush)1Bush - forward (Upper control arm)2
Front SuspensionLesson 2 – Chassis
11Technical Training (G421043) 

Nut (Upper control arm forward bush)3
Flanged bolt (Upper control arm forward bush)4
Bush - rearward (Upper control arm)5
Nut (Upper control arm rearward bush)6
Nut (Anti-roll bar link to upper control arm)7
Upper control arm8
Ball joint (Upper control arm to swivel hub)9
Nut (Ball joint to swivel hub attachment)10
Nut (Lower control arm rearward bush)11
Flat washer12
Cam washer (Lower control arm rearward bush)13
Bush - rearward (lower control arm)14
Wheel knuckle15
Wheel hub and bearing assembly16...

DAMPER MODULE - AIR SUSPENSION
Rebound washer*1
O-ring - damper rod (2 off)*2
Self-locking nut*3
Spacer - damper rod*4
Bump washer5
Spring aid*6
O-ring - air spring sleeve support (2 off)*7
Damper assembly*8
Voss air fitting9
Damper rod10
Self-locking nut (3 off)11
Top mount12
Bush13
Retaining pin - air spring assembly*14
Air spring assembly*15
NOTE: * shows service items
The damper module comprises an air spring assembly,
top mount and a damper assembly. The damper and air
spring are only serviceable as...

The damper functions by restricting the flow of
hydraulic fluid through internal galleries within the
damper. The damper rod moves axially within the
damper, its movement limited by the flow of fluid
through the galleries, providing damping of undulations
in the terrain. The damper rod is sealed at its exit point
from the damper body to maintain the fluid within the
unit and to prevent the ingress of dirt and moisture. The
seal also incorporates a wiper to keep the rod clean.
Air Spring
The air spring...

DAMPER MODULE - COIL SPRING SUSPENSION
Self locking nut1
Rebound washer2
Top mount assembly3
Spring spacer (selective)4
Spring isolator5
Bump washer6
Spring aid7
Dust tube8
Bump cup9
Coil spring10
Damper11
Damper rod12
Self locking nut (3 off)13
Bush14
The coil spring damper module comprises a damper,
coil spring and top mount.Damper
The damper assembly is a twin tube design with the
conventional coil spring located on a welded spring seat
on the damper tube. The lower end of the damper is
fitted with a...

The damper functions by restricting the flow of
hydraulic fluid through internal galleries within the
damper. The damper rod moves axially within the
damper, its movement limited by the flow of fluid
through the galleries, providing damping of undulations
in the terrain. The damper rod is sealed at its exit point
from the damper body to maintain the fluid within the
unit and to prevent the ingress of dirt and moisture. The
seal also incorporates a wiper to keep the rod clean.
The damper rod is located...

ANTI-ROLL BAR
Nut - link to anti-roll bar (2 off)1
Link (2 off)2
Nut - link to upper control arm (2 off)3
RH upper control arm4
Nut (4 off)5
Bracket (2 off)6
Bush (2 off)7
LH upper control arm8
Anti-roll bar9
Front SuspensionLesson 2 – Chassis
17Technical Training (G421043)