Land Rover 300tdi Diesel Engine Overhaul 1997 Rover Manual

ENGINE
DESCRIPTION ANDOPERATION 7
ROCKER
SHAFTANDCOVER
1. Rocker coverflange nuts
2. Sealing washer
3. Oil filler cap
4. Rocker cover
5. Rocker covergasket
6. Rocker shaft
7. Rocker shaftpedestal
8. Flange bolt
9. Washer 10.
Rocker armbush
11. Adjusting screw
12. Locknut
13. Rocker arm
14. Spacer
15. Pedestal stud
16. Nut
17. Crankcase breathercycloneunit
18. Oring  

ENGINE 8DESCRIPTION ANDOPERATION  

ENGINE
DESCRIPTION ANDOPERATION 9
CYLINDER
HEAD
1. Valve cap
2. Collets
3. Valve spring cup
4. Valve spring
5. Valve spring seat
6. Valve stemseal
7. Valve guide
8. Exhaust valveseat
9. Exhaust valve
10. Inlet valve seat
11. Inlet valve
12. Cylinder headbolt-M12 -long
13. Cylinder headbolt-M12 -short
14. Cylinder headbolt-M10 15.
Heater hoseadaptor
16. Engine liftingbrackets
17. Core plugs
18. Cylinder headgasket
19. Thermostat housinggasket
20. Coolant fillerplug
21. Thermostat housing
22. Thermostat...

ENGINE 10DESCRIPTION ANDOPERATION  

ENGINE
DESCRIPTION ANDOPERATION 11
TIMING
BELTREAR COVER ANDGEARS
1. Camshaft oilseal
2. Gasket
3. Crankshaft frontoilseal
4. Timing beltrear cover
5. Injection pumpdrivegear
6. Hub plate
7. Nut -injection pumphub
8. Bolt -injection pumphubplate
9. Camshaft drivegear
10. Washer -camshaft drivegear 11.
Bolt -camshaft drivegear
12. Idler pulley
13. Retaining nut
14. Crankshaft gear
15. Bolt -timing belttensioner pulley
16. Spacer -timing belttensioner pulleybolt
17. Timing belttensioner pulleyandtensioner...

ENGINE 12DESCRIPTION ANDOPERATION  

ENGINE
DESCRIPTION ANDOPERATION 13
TIMING
BELTANDFRONT COVER
1. Timing belt
2. Gasket
3. Access plate
4. Bolt -access plate
5. Timing beltfront cover 6.
Bolts -timing beltfront cover
7. Wading plug
8. Oil seal
9. Crankshaft pulley
10. Pulley bolt  

ENGINE 14DESCRIPTION ANDOPERATION  

ENGINE
DESCRIPTION ANDOPERATION 15
OPERATION The
300TDiisa4cylinder, watercooled,
turbocharged dieselengine withacapacity of2.5
litres.The cast ironcylinder blockisintegral withthe
crankcase andincorporates directbored cylinders.
The crankshaft iscarried in5main bearings,
end-float beingcontrolled bythrust washers which
are positioned onboth sides ofthe centre main
bearing.The flywheel/drive platehousing isan aluminium
alloy casting secured tothe rear ofthe cylinder
block, italso forms themounting forthe...

ENGINE 16DESCRIPTION ANDOPERATION