Kyocera KM C2525E User Manual

Optional Equipment
4-3
Additional Memory
Fax Kit Network Interface 
Card Serial Interface
Security Kit Memory Card 
(CompactFlash) 
Hard Disk 
Downloaded From ManualsPrinter.com Manuals 

Optional Equipment
4-4
Document Processor
Automatically scans each page of single sided 
originals. Also automatically flips over 2-sided originals 
for duplex copying and split copying. For document 
processor usage operation, see Loading Originals in 
the Document Processor (option) on page2-18. 
Paper Feeder
Add an additional 2 paper cassettes like Cassette 2 of 
the main unit. Paper capacity and loading method is the 
same as Cassettes 1 and 2. See Loading Paper into 
Cassette 1, 2 on page2-2.
NOTE:...

Optional Equipment
4-5
Document Finisher
The document finisher holds a large quantity of finished 
copies. The finisher offers a convenient means of 
sorting. Sorted finished copies may also be stapled. 
For further details, refer to the document finisher 
Operation Guide.
3000 Sheet Document Finisher
The document finisher holds a large quantity of finished 
copies. The finisher offers a convenient means of 
sorting. It can also staple finished sets and punch holes 
if equipped with the appropriate...

Optional Equipment
4-6
Key Counter
Use the key counter to monitor machine usage. The 
key counter offers a convenient solution for centralized 
management of copy volume for different departments 
in a large company.
Inserting the Key Counter
Insert the key counter securely into the key counter 
slot.
NOTE: When the key counter function is activated, 
copies can only be made when a key counter is 
inserted into the machine. If the key counter is not 
inserted securely, Insert key counter will be...

Optional Equipment
4-7
Hard Disk 
The hard disk is used to store print queue data. Also, 
the hard disk is required to use all e-MPS functionality. 
Additional Memory
Increase the memory available to the printer. Additional 
memory enables printing more complex data. An 
additional 128 MB, 256 MB or 512 MB may be added. 
Security Kit
This machine functions by temporarily storing scanned 
data on an internal hard disk. After being used for 
copying, this data is not accessible from the operation 
panel,...

Optional Equipment
4-8
Network Interface Card
Like the machine’s standard network interface, the 
network interface card supports TCP/IP, IPX/SPX, 
NetBEUI and EtherTalk protocols to enable network 
printing for Windows, Macintosh, UNIX, Netware and 
other environments. 
Serial Interface
Install for connecting to printers with serial port 
interfaces. Supports the RS-232C serial interface. 
Document Table
Place original or other documents when using the 
machine. It has a drawer to accommodate clips....

5-1
5 Maintenance
This chapter describes cleaning and toner replacement.
• Cleaning...5-2
• Toner Container and Waste Toner Box Replacement...5-5
Downloaded From ManualsPrinter.com Manuals 

Maintenance
5-2
Cleaning 
Clean the machine regularly to ensure optimum copy quality.
Original Platen and Platen
Open the document processor. Wipe the platen and 
the backside of the document processor with a soft 
cloth dampened with alcohol or mild detergent. 
IMPORTANT: Do not use thinner or other organic 
solvents.
Document Processor (option)
Open the document processor. Wipe the backside of 
the document processor and the white rollers with a 
soft cloth dampened with alcohol or mild detergent....

Maintenance
5-3
Slit Glass
When black streaks or dirt appears in 
copies when using the optional 
document processor, clean the slit glass 
with the included cleaning cloth. The 
message: Clean the slit glass for original 
fed from DP (Clean the slit glass for 
original fed) may be displayed if the slit 
glass requires cleaning. After cleaning, 
press [End]. 
IMPORTANT: Lightly wipe the slit glass with a dry cloth. To remove adhesive material or ink, apply 
alcohol to a cloth and wipe lightly. Do not use...

Maintenance
5-4
3Open left cover 1.
4Open duplex unit A1. 
5As shown in the figure, clean dirt from the separator by 
moving the brush from side to side along the separator.
6Set duplex unit A1 securely to the original position and 
close left cover 1.
IMPORTANT: Push the indicated position to close left 
cover 1 securely.
7Put away the cleaning brush and close the front cover. 
Downloaded From ManualsPrinter.com Manuals