Kyocera KM 4050 User Manual

Basic Operation 
OPERATION GUIDE3-7
Copying
Follow the steps as below for basic copying.
1Press the Copy key when the 
Copy key/indicator is off.
NOTE: If you place the original and press the Start key before the copier 
has warmed up, only the scanning is performed in advance and the 
copying job starts upon completion of the warm-up.
2Place the originals on the 
platen or in the optional 
document processor.
NOTE: For loading instructions, refer to Loading Originals on page 2-40.
3Check that [Auto] is...

Basic Operation 
3-8OPERATION GUIDE
4Use the numeric keys to enter 
the copy quantity. Specify 
desired number up to 999.
5Press the Start key to start 
copy.
6Remove the finished copies 
from the top tray.
Adjusting Density
Adjust the copy density.
Density Adjustment 
OptionDescription
Manual Adjust density using the 7 or 13 levels.
Auto Optimum density is selected depending on 
density of original.
Downloaded From ManualsPrinter.com Manuals 

Basic Operation 
OPERATION GUIDE3-9
1Press [Image 
Quality] and then 
[Density].
2Adjust density manually pressing [-3] (Lighter) to [+3] (Darker). You can 
change the density level [-3] (Lighter) to [+3] (Darker) by half a step.
To change density 
adjustment from 
Manual to Auto, 
press [Auto].
3Press [OK].
Selecting Image Quality
Select image quality suited to the type of original.
St at us10/5/2006    10:10
Image
Quality Set Original. Copy I ma ge
Org./Paper/
Finishing Quick Setup Layout/Edit...

Basic Operation 
3-10OPERATION GUIDE
1Press [Image 
Quality] and then 
[Original Image].
2Select the image 
quality.
3Press [OK].
Zoom Copying
Adjust the magnification to reduce or enlarge the original image. The 
following zoom options are available.
Auto Zoom
Automatically reduces or enlarges the original image suited to the selected 
paper size.
St at us10/5/2006    10:10
Image
Quality Set Original. Copy I ma ge
Org./Paper/
Finishing Quick Setup Layout/Edit Advanced
Setup DensityCopi e s
Original...

Basic Operation 
OPERATION GUIDE3-11 Manual Zoom
Manually reduces or enlarges the original image in 1% increment between 
25 and 400%.
Preset Zoom
Reduces or enlarges at preset magnifications.
The following magnifications are available.
25 %
400 %
Model Zoom Level (OriginalCopy)
Inch Models 100%, Auto, 400% (Max.), 200% (STMT>>Ledger), 
154%(STMT>>Legal), 129% (Letter>>Ledger), 121% 
(Legal>>Ledger), 78% (Legal>>Letter), 77% 
(Ledger>>Legal), 64% (Ledger>>Letter), 50% 
(Ledger>>STMT), 25% (Min.)
Metric...

Basic Operation 
3-12OPERATION GUIDE XY Zoom
Select vertical and horizontal magnifications individually. Reduce or 
enlarge original images in 1% increments between 25% and 400%.
1Press [Layout/Edit] 
and then [Zoom].
2Press [Standard Zoom] to use Auto Zoom.
Press [+] or [–] to change the displayed magnification as desired. You can 
also enter the magnification directly using the numeric keys by pressing [# 
Keys].
When using Preset 
Zoom, select the key 
of desired 
magnification.
When using XY 
Zoom,...

Basic Operation 
OPERATION GUIDE3-13
Duplex Copying
Produce two-sided copies. The following duplex options are available.
One-sided to Two-sided
Produces two-sided copies from one-sided originals. In case of an odd 
number of originals, the back side of the last copy will be blank.
The following binding options are available.
A Original Left/Right to Binding Left/Right: Images on the second sides 
are not rotated.
B Original Left/Right to Binding Top: Images on the second sides are 
rotated 180°. Copies...

Basic Operation 
3-14OPERATION GUIDE Two-sided to Two-sided
Produces two-sided copies from two-sided originals. Optional document 
processor is required.
NOTE: The paper sizes supported in Two-sided to Two-sided are Ledger, 
Legal, Letter, Executive Statement-R, Oficio II, 8.5×13.5, A3, B4, A4, B5, 
A5-R and Folio.
Book to One-sided
Produces a 1-sided copy of a 2-sided or open book original.
The following binding options are available.
Binding Left: Originals with facing pages are copied from left to...

Basic Operation 
OPERATION GUIDE3-15 Book to Two-sided
Produces two-sided copies from an open book original with facing pages.
NOTE: The sizes of originals and paper supported in Book to Two-sided 
are Letter, A4, B5, and 16K.
1Press [Layout/Edit] 
and then [Duplex].
2Select the desired 
Duplex option.
3If you choose [2-sided>>2-sided], [2-sided>>1-sided], [Book>>1-sided] or 
[Book>>2-sided], select the binding edge of the originals of Original.
4If you choose [1-sided>>2-sided], [2-sided>>2-sided] or...

Basic Operation 
3-16OPERATION GUIDE
6Press [OK].
7Place the originals and press the Start key.
If the original is placed on the platen, scan it and replace it with a next one. 
Then, press the Start key.
After scanning all originals, press [Scan Finish] to start copying.
Collate/Offset Copying
Collate
Scan multiple originals and 
deliver complete sets of copies 
as required according to page 
number.
Offset
Use offset to produce copies 
after rotating each set (or 
page) by 90º.
NOTE: To use offset...