Kyocera KM 1650 User Manual

Copy Functions 
ADVANCED OPERATION GUIDE 1-11
Borderline Types
The following borderline types are available.
Using Combine Mode
1Position the original and press 
[Combine].
2Press S or T to select the 
combine option required and 
press [Enter].
3Press S or T to select the Border 
Line type and press [Enter]. Borderline typeCopy
2 in 14 in 1 (horizontal arrangement)/
4 in 1 (vertical arrangement)
None
Solid
Dotted
Mark or Cropmark
4 in 1 (N)
Co mbi n e:
2 in 1
4 in 1 (Z)
Dotted
Bo rder Line:
None
Solid...

Copy Functions 
1-12 ADVANCED OPERATION GUIDE
4Press [Start]. 
If using the optional Document 
Processor, copying completes 
automatically.
If using the platen, a message 
displays when the next original is 
required. Position the next original 
and press [Start].
When all originals have been scanned, press [Enter].
Margin Mode
The image of the original can be shifted to make a margin (blank) space at 
the left or top side of the copy. You can set the width of each margin to
1/8 to 3/4 in 1/8 increments...

Copy Functions 
ADVANCED OPERATION GUIDE 1-13
Border Erase Mode
Shadows that appear around the edges of copies can be erased. The 
following modes are available:
NOTE: To set the default value for Border Erase width, refer to Border 
Erase Width Default Value, on page 3-12.
1Position the original and press 
[Border Erase].
2Press S or T to select Sheet 
Erase or Book Erase and press 
[Enter].
3Press < or > to set the Border 
Erase Width, 1/8 to 3/4 in 1/8 
increments (1 mm to 18 mm in 1 
mm increments)...

Copy Functions 
1-14 ADVANCED OPERATION GUIDE
Continuous Scan
Using Continuous Scan, originals can be scanned individually or in blocks 
but still be processed as a single job. The originals are scanned into the 
machine’s memory until all the originals have been scanned, copies are 
then made.
1Position the first original(s) and 
press [Function].
2Press S or T to select 
Continuous Scan and press 
[Enter].
3Press S or T to select On and 
press [Enter].
4Press S or T to select End and press [Enter]....

Copy Functions 
ADVANCED OPERATION GUIDE 1-15
Auto Rotation
Use Auto Rotation to automatically rotate images counterclockwise by 90 
degrees, if the orientation of the original is different to the paper loaded in 
the cassette.
NOTE: To enable Auto Rotation as the default setting, refer to Auto 
Rotation Copy, on page 3-11.
The paper sizes that can be used for Auto Rotation are A4, 11 × 8
1/2 or 
smaller sizes
NOTE: A3, B4, Folio, 11 × 17 (Ledger) or 81/2× 14 (Legal) cannot be 
used for Auto Rotation....

Copy Functions 
1-16 ADVANCED OPERATION GUIDE
EcoPrint Mode
Ecoprint mode reduces toner consumption. Use this mode when high 
quality copies are not necessary, for example, for draft copies.
NOTE: The copy exposure will be a little lighter.
To set the EcoPrint mode as the default setting, refer to EcoPrint Mode, 
on page 3-4.
1Position the first original(s) and 
press [Function].
2Press S or T to select EcoPrint 
and press [Enter].
3Press S or T to select On and 
press [Enter].
EcoPrint
Func tio n:...

Copy Functions 
ADVANCED OPERATION GUIDE 1-17
Auto Selection Mode
If using the optional Document Processor, Auto Selection mode enables 
the machine to detect each original size and produce copies on the same 
size paper as the original.
NOTE: The maximum number of sheets that can be loaded in the 
Document Processor in this mode is 30.
The following original sizes can be used in Auto Selection mode:
• Inch Specification — 11 × 8
1/2 and 11 × 17 (Ledger) or
8
1/2× 14 (Legal) and 81/2× 11 (Letter)
•...

Copy Functions 
1-18 ADVANCED OPERATION GUIDE
Program Function
Up to eight combinations of copy modes and functions displayed on the 
operation panel can be registered as a single program.
Registering a Program
1Select the copy options to be registered (for example 5 copies, Sort, 
Margin) and press [Program].
2Press S or T to select Register 
program and press [Enter].
3Press S or T to select the 
program number required (1 to 8) 
and press [Enter].
The program is registered.
NOTE: You can also select...

ADVANCED OPERATION GUIDE 2-1
2 Printer Settings
This section explains how to change settings which are 
required for the printer functions of the machine. 
• Status Page .................................................................. 2-2
• e-MPS Function............................................................ 2-3
• Interface ......................................................................2-11
• Emulation ................................................................... 2-18
• Font...

Printer Settings 
2-2 ADVANCED OPERATION GUIDE
Status Page
The printer default settings, the memory capacity, and other details are 
printed on the Status Page.
1Press [Printer].
2Press S or T to select MENU 
and press [Enter].
3Press S or T to select Print 
Status Page and press [Enter].
4Press S or T to select Print and 
press [Enter].
The Status Page is printed.
GO
CANCEL
Read y
MENU
Back
Print Status Page
Men u
In terf ac e
No
Print
Print Status Page
Downloaded From ManualsPrinter.com Manuals