Kyocera KM 1650 User Manual

ADVANCED OPERATION GUIDE 1-1
1 Copy Functions
This chapter explains how to use the copier functions of the 
machine.
• Original Size ................................................................. 1-2
• Original Placement ....................................................... 1-4
• Offset Mode .................................................................. 1-5
• Stapling......................................................................... 1-6
• Combine Mode...

Copy Functions 
1-2 ADVANCED OPERATION GUIDE
Original Size
Use Original Size to select the size of original being scanned. The 
selection must match the physical size of the original.
The following Original Size options are available:
•Regular Size - use to select a standard original size.
•Other Regular Size - use for additional standard original sizes.
•Input Size - use this option to enter a custom original size if the size 
required is not displayed.
Regular Size
Use the following procedure to select...

Copy Functions 
ADVANCED OPERATION GUIDE 1-3
Input Size
1Position the original and press [Original Size].
2Press S or T to select Input Size 
and press [Enter].
3Press < or > to select the vertical 
size required, 2 to 11 
5/8 in 1/8 
increments (50 to 297 mm in 1 
mm increments) can be selected.
Press T to select the horizontal size.
4Press < or > to select the 
horizontal size, 2 to 17 in 1/8 
increments (50 to 432 mm in 1 
mm increments) can be selected.
Press [Enter].
5Press [Start]. Copying...

Copy Functions 
1-4 ADVANCED OPERATION GUIDE
Original Placement
You must specify the orientation of the original when using the following 
functions:
- Duplex Copying
- Split Copying (from 2-sided originals)
- Margin mode
- Border Erase mode
- Combine mode
- Auto Selection mode (Optional)
- Stapling (Optional)
When the originals are positioned on the Platen:
When the originals are loaded in the Document Processor:
NOTE: To change the default setting for Original Orientation, refer to 
Original...

Copy Functions 
ADVANCED OPERATION GUIDE 1-5
Offset Mode
Use this mode to change the orientation of the output at the end of each 
set for easy division.
NOTE: If the Document Processor (option) or Finisher (option) is not 
installed, use this function with Sort copying.
The paper sizes that can be used for Offset copying are A4, B5 and 
11 × 8
1/2
NOTE: Ensure the Auto Rotation feature is On, refer to Auto Rotation, on 
page 1-15.
1Position the original and press 
[Offset].
2Press [Sort].
3Enter the...

Copy Functions 
1-6 ADVANCED OPERATION GUIDE
Stapling
Copies can be stapled in the upper left or upper right corner.
NOTE: The optional Finisher must be installed.
The orientation of originals and the stapling position is shown below.
1Position the original and press 
[Staple].
2Press  S or T to select the 
stapling position and press 
[Enter].
3Press [Start]. 
If using the optional Document 
Processor, copying completes 
automatically.
If using the platen, a message 
displays when the next original is...

Copy Functions 
ADVANCED OPERATION GUIDE 1-7
Combine Mode
The images from either 2 or 4 
originals can be reduced and 
combined onto a single copy. The 
Border Line of each original can 
also be marked with a solid or 
dotted line.
The following Combine modes 
are available:
NOTE: Both the Original Size and the Copy Paper Size must be regular 
sizes.
Original
Copy
2
112
Mode Description
2 in 1Copies two originals onto one sheet. This mode can also be used in 
conjunction with Duplex Mode (optional) in...

Copy Functions 
1-8 ADVANCED OPERATION GUIDE
2 in 1
The following illustrations indicate how the orientation of the original will 
affect the resulting copies:
Using the Platen
Using the Document Processor
NOTE: Ensure that the first page of the originals is scanned first.
Copy OriginalCopy Original
Copy OriginalCopy Original
Downloaded From ManualsPrinter.com Manuals 

Copy Functions 
ADVANCED OPERATION GUIDE 1-9
4 in 1 (Horizontal Arrangement)
The following illustrations indicate how the orientation of the original will 
affect the resulting copies:
Using the Platen
Using the Document Processor
NOTE: Ensure that the first page of the originals is scanned first.
Copy OriginalCopy Original
Copy OriginalCopy Original
Downloaded From ManualsPrinter.com Manuals 

Copy Functions 
1-10 ADVANCED OPERATION GUIDE
4 in 1 (Vertical Arrangement)
The following illustrations indicate how the orientation of the original will 
affect the resulting copies:
Using the Platen
Using the Document Processor
NOTE: Ensure that the first page of the originals is scanned first.
Copy OriginalCopy Original
Copy OriginalCopy Original
Downloaded From ManualsPrinter.com Manuals