Kyocera FS C8500DN User Manual

Troubleshooting 6-27
5If jammed paper is visible in the paper ejection slot, pull the jammed 
paper toward you to remove it.
6Open the top cover, and remove the jammed paper.
7Close the top cover.
8Push the fuser cover back in place and press the specified position to 
close left cover 1.
Downloaded From ManualsPrinter.com Manuals 

6-28Troubleshooting 
Downloaded From ManualsPrinter.com Manuals 

 A-1
Appendix
This chapter lists the provides details of the available interfaces 
and describes the optional hardware that can be installed on 
the printer and shows the printers specifications.
Interface A-2
USB Interface A-2
Network Interface A-3
About the Options A-5
Expansion Memory Modules A-6
General Description of Options A-9
Specifications A-10
For availability of the options, consult your service technician.
Downloaded From ManualsPrinter.com Manuals 

A-2 
Interface
This chapter explains the signals used in the printers USB, and network 
interfaces. It also lists pin assignments, signal functions, timings, 
connector specifications, and voltage levels.
• USB Interface
• Network Interface
USB Interface
This printer supports the Hi-Speed USB. USB (Universal Serial Bus) 
interface specifications and interface signals are as follows.
Specifications
Basic Specification
Complies with the Universal Serial Bus Specification Revision 2.0.
Connectors
Printer:...

 A-3
Network Interface
Features
Automatic IP Address Resolution
This feature is compatible with the DHCP/DHCPv6 protocol and allows 
the printer to automatically receive IP addresses from the DHCP/DHCPv6 
server. 
Management using Web Browsers
HTTP pages are incorporated in to the interface, so that a web browser 
can be used to monitor and change a range of settings. The settings can 
be password-protected.
Support for a Range of Protocols
The SMTP, POP3, SSL, SNMP, IPv6 and NetBIOS over TCP/IP...

A-4 
Operation Environment
10 to 35 °C (50 to 95 °F), 20-80 % RH (condensation-free)
EMI Countermeasures
VCCI Class B, FCC Class B (U.S.), CE (Europe)
IMPORTANT  When IPv6 functions are used, the devices used on the 
network (routers, PCs, etc) must support IPv6.
Downloaded From ManualsPrinter.com Manuals 

 A-5
About the Options
This printer has the following options available to satisfy your printing 
requirements. For instructions on installing individual options, refer to the 
documentation included with the option. Some options are explained in 
the following sections.
Paper Feeder Document Finisher 3,000 Sheet Document 
FinisherExpansion Memory
3,000 Sheet Paper 
Feeder
Downloaded From ManualsPrinter.com Manuals 

A-6 
Expansion Memory Modules
The printers main controller board has a memory slot into which you can 
plug in optional memory modules (dual in line memory modules). An 
optional memory module can be installed to expand the printer’s memory 
to 2 GB. The printer initially has 1 GB of memory installed. 
Expansion Memory Modules
The optional memory module is 1 GB.
Precautions for Handling the Printers Main Controller Board 
and Memory Modules
To protect electronic parts, discharge static electricity from...

 A-7
Installing the Memory Modules
IMPORTANT  Remove any USB memory that is attached to the 
printers USB memory slot.
1Power off the printer and unplug the printer power cord.
2Remove the five screws (large) from the cover on the back of the 
printer.
3Remove the three screws (small) and then remove the cover.
4Remove the optional expansion memory module from its package. 
With the terminals on the memory module facing away from you, align 
the cutouts with the matching keys of the socket and insert the...

A-8 
Checking Expansion Memory
After installing expansion memory, use the following method to 
check that it is correctly installed.
1In the Report Print menu, press U or V to select Status Page.
2Press [OK]. A confirmation message is displayed.
3Press [Yes] ([Left Select]). Accepted. appears and the printer 
prints the status page.
Check the amount of memory with the printed status page. If the 
memory addition has been done correctly, the total amount of 
memory will have increased. (The amount of...