Kyocera FS 9530DN User Manual

Using the Operation Panel 
ADVANCED OPERATION GUIDE 2-3
Operation Indicators
The following indicators light up during normal operation and when the 
printer needs attention.Indicator Description Flashing: Indicates when an error occurs that 
you can clear by yourself.
Lit:  Indicates that the printer is on-line. 
The printer prints received data.
Off:  Indicates that  the printer is off-line. Data 
can be received but will not be printed. Also 
indicates when printi ng is automatically 
stopped due to...

Using the Operation Panel 
2-4 ADVANCED OPERATION GUIDE
Message Display
The message display gives information in the form of short messages. The 
nine messages listed below are displayed during normal warm-up and 
printing.
Other messages that may appear when the printer needs the operator’s 
attention are explained on page 4-7 in the Operation Guide .
Message Meaning
Self test The printer is self-testing after power-up.
Original toner 
installed The installed toner cont
ainer is displayed if...

Using the Operation Panel 
ADVANCED OPERATION GUIDE 2-5
Indicators in Message Display
The interface Indicator shows the interface that is currently used. It uses 
the following abbreviations:
Each interface has a timeout time of 30 seconds during which the other 
interface should wait to receive a pr int job. Even if a print job has been 
completed on the interface, you should wait for this period until the other 
interface begins printing the job.
Paper Size Indicator
This indicator shows the paper...

Using the Operation Panel 
2-6 ADVANCED OPERATION GUIDE* With only the MP tray feeding
NOTE:While the printer is processing data, the 
SIZE display indicates 
the paper size selected by the application software.FO
Folio
Y4 Youkei 4*
DL Envelope DL* 
C5 Envelope C5* 
b5 ISO B5* 
EX Executive* 
#6 Envelope #6*
#9 Envelope #9* 
HA Hagaki (Japanese Postcard)*
OH Oufuku Hagaki (Return 
Postcard)*
CU Custom Size
C4 Envelope C4
O2 Oficio II
ST Statement
Y2 Youkei 2*
8K 8K (8 kai)*
16K 16K (16 kai)*
Message...

Using the Operation Panel 
ADVANCED OPERATION GUIDE 2-7
Media Type Indicator 
This shows the media type defined for the current paper cassette. 
Automatic cassette switching is available according to the media type.
The media type can be specified at  the operation panel. Refer to Creating 
Custom Paper Type on page 2-82 .
The following abbreviations are used to indicate the media type. 
* With only the MP tray feeding Message Display Media Type
(None) Auto 
PLAIN Plain 
TRNSPRNCY Transparency*
PREPRINT...

Using the Operation Panel 
2-8 ADVANCED OPERATION GUIDE
Keys
The operation panel keys are used to configure the printer. Note that 
certain keys have a secondary function.
NOTE:Settings made with these keys affect only the interface currently 
in use.
GO Key This key switches the printer between on-line and off-line. Use this key to:
• Toggle the printer’s on-line and off-line states. You can temporarily  stop the print job by swit ching the printer off-line.
• Print and feed out one page when the...

Using the Operation Panel 
ADVANCED OPERATION GUIDE 2-9Cursor Keys
The four cursor keys are used in th e menu system to access an item or 
enter numeric values.
The arrow key with the question mark ( ) may be pressed when the paper 
jam message has appeared  on the message display. A help message will 
then appear to facilitate ja m clearing in the location.
* OK Key This key is used to:
• Finalize settings of numeric values and other selections.
• Set the paper source when  Use alternative? is shown in...

Using the Operation Panel 
2-10 ADVANCED OPERATION GUIDE
Canceling a Printing Job
1While the printer displays Processing, press [CANCEL] .
Print Cancel?  appears on the message display followed by the 
interface in use. The interface is indicated by one of the following 
messages:
Parallel
USB
Network
Serial  (option serial interface)
Option  (option network interface)
2Press [OK]. Canceling data  appears on the message display and 
printing stops after the current page is printed.
Downloaded From...

Using the Operation Panel 
ADVANCED OPERATION GUIDE 2-11
Using the Operation Panel
This section explains how to  use the menu selection system.  [MENU] on 
the operation panel allows you to use the menu to set or change the printer 
environment such as the number of copies to print, emulation, etc., to your 
specific needs. Settings can be made when  Ready is indicated on the 
printer message display.
The printer obeys the most recently re ceived printer settings sent from the 
application software, or...