Kyocera FS 9530DN User Manual

Advanced Operation Guide
FS-9130DN
FS-9530DN
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

Contents 
ADVANCED OPERATION GUIDEi
Contents
1 Handling Paper ...........................................................................................................................1-1
General Guidelines  ............................................................................................................ .........1-2
Special Paper  ................................................................................................................. .............1-9
Media Type...

Contents 
iiADVANCED OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals 

ADVANCED OPERATION GUIDEiii
Introduction
This guide has the following chapters:
• 1 Handling Paper
Explains how to choose, handle and load paper.
• 2 Using the Op eration Panel
Explains how to use the operation panel to configure the printer.
• 3 Fonts
Shows the available fonts.
• 4 Options
Shows the available options.
• 5 Computer Interface
Describes the possible connections between the printer and 
your computer.
• Glossary
A Glossary of terms used is provided here.
Downloaded From ManualsPrinter.com...

 
ivADVANCED OPERATION GUIDE
Conventions
This manual uses the following conventions:
Convention Description Example
Italic Typeface Used to emphasize a key 
word, phrase or references to 
additional information. Close the 
top cover.
Refer to  Toner Container 
Replacement on page 3-3 .
Courier Typeface Used to denote messages or 
names displayed on the 
operation panel. Replace the waste toner box when 
the 
Check waste toner box  
message is displayed.
Bracket Bold Text 
Typeface Used to denote...

ADVANCED OPERATION GUIDE 1-1
1 Handling Paper
This chapter explains the following topics:
• General Guidelines......................................................  1-2
• Special Paper ............. .................................................  1-9
• Media Type ............... .................................................  1-13
• Loading Paper .............. ............................. ................  1-14
Downloaded From ManualsPrinter.com Manuals 

Handling Paper 
1-2 ADVANCED OPERATION GUIDE
General Guidelines
The printer is designed to print on high-quality copier bond paper (the kind 
used in ordinary dry copier machines), but it can also accept a variety of 
other types of paper within the limits specified below.
NOTE:The manufacturer assumes no liability for problems that occur 
when paper not satisfying these requirements is used.
Selection of the right paper is import ant. Using the wrong paper can result 
in paper jams, misfeeding,...

Handling Paper 
ADVANCED OPERATION GUIDE 1-3
Paper Specifications
The following table summarizes the basic paper specifications. Details are 
given on the following pages.
Minimum and maximum paper sizes The minimum and maximum paper size s are as follows. For non standard 
paper such as cut-sheet, the MP  (multi-purpose) tray must be used.
Item Specification
Weight Cassette: 60 to 105 g/m
2 
(16 to 28 lb/ream)
MP tray: 45 to 200 g/m2 
(12 to 53 lb/ream)
Thickness 0.086 to 0.110 mm (3.4 to  4.3 mils)...

Handling Paper 
1-4 ADVANCED OPERATION GUIDE
Selecting the Right Paper
Laser printing is a process involving laser light, electrostatic discharge, 
toner, and heat. In addition, as the paper passes through the printer it 
undergoes considerable sliding, bending, and twisting motions. A high-
quality printing paper matching the pr inter’s requirements withstands all 
these stresses, enabling the printer to turn out clean, crisp printed copies 
consistently.
Remember that all paper is not the sa me. Some...