Kyocera FS 9530DN User Manual

Handling Paper 
ADVANCED OPERATION GUIDE 1-15
2Hold the paper guide and move it to align the paper guide with the required 
paper width. Paper sizes are marked inside the paper cassette.
Downloaded From ManualsPrinter.com Manuals 

Handling Paper 
1-16 ADVANCED OPERATION GUIDE
3Hold the paper stopper and move it to align with the required paper length.
4Set the paper flush against the left-hand wall of the paper cassette.
IMPORTANT:There is a sticker (  in the  illustration) indicating paper 
capacity attached to the  inside of the paper cassette. Do not load paper 
above this limit.
When loading paper into the paper cassette, make sure that the print side 
is facing upward. (The print side is  the side facing upward when the...

Handling Paper 
ADVANCED OPERATION GUIDE 1-17
5Set the supplied paper size plate so that the size of the paper loaded can 
be checked by looking at the  front of the paper cassette.
6Push the paper cassette back until it stops.
NOTE:Before leaving the printer in disuse for a prolonged period of time, 
remove the paper from the paper cassette(s) and seal it in its original 
packaging to protect from moisture. Also, when storing paper in a high 
temperature and high humidity environm ent, seal it in a...

Handling Paper 
1-18 ADVANCED OPERATION GUIDE
Loading Paper into the MP (Multi-Purpose) Tray
Special paper as well as standard paper can be loaded into the MP tray. 
When printing onto transparencies or thick paper, be sure to use the MP 
tray.
IMPORTANT:When setting special paper, such as transparencies and 
thick paper, into the MP  tray, select the type of paper by referring to  Media 
Type on page 1-13.
NOTE:The number of sheets of standard paper that can be loaded in the 
MP tray at a time is...

Handling Paper 
ADVANCED OPERATION GUIDE 1-19
3Adjust the insert guides to the size of the paper to be loaded.
4Insert the paper along the guides as far as it will go.
IMPORTANT:When loading paper into the MP tray, make sure that the 
print side is facing upward. (The print side is the side facing upward when 
the package is opened.) If the leading edge of the paper is curled, 
straighten it out before loadi ng the paper in the MP tray.
Downloaded From ManualsPrinter.com Manuals 

Handling Paper 
1-20 ADVANCED OPERATION GUIDE
Setting Envelopes
When using the optional printer function, envelopes  can be set in the MP 
tray.
NOTE:Do not print on envelopes with fl ap adhesive exposed. This can 
cause printer malfunction.
1Open the MP tray.
2Align the insert guides with the envelope size.
3Position the envelope against the insert guides with the print side facing 
upward, and insert it as far as it will go.
Downloaded From ManualsPrinter.com Manuals 

Handling Paper 
ADVANCED OPERATION GUIDE 1-21
NOTE:Do not load more paper than w ill fit under the load limits on the 
inside of the MP tray. If the paper is considerably curled in one direction, 
for example, if the paper is already  printed on one side, try to roll the 
paper in the opposite direction to co unteract the curl. Printed sheets will 
then come out flat.
Correct
Incorrect
Downloaded From ManualsPrinter.com Manuals 

Handling Paper 
1-22 ADVANCED OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals 

ADVANCED OPERATION GUIDE 2-1
2 Using the Operation Panel
This chapter explains the following topics:
• Understanding the Oper ation Panel ............................  2-2
• Canceling a Printing Job .......... .................................  2-10
• Using the Operation Panel ......... ................................ 2-11
• Using the Menu Selection System ............................  2-19
• Status Pages ............ .................................................  2-20
• e-MPS ..................

Using the Operation Panel 
2-2 ADVANCED OPERATION GUIDE
Understanding the Operation Panel
The operation panel has an LCD message display, indicators, and eight 
keys.
Ready
- - -  A4 PLAIN
Message Display
(Refer to page 2-4 )
Keys (Refer to page 2-8 ) Paper Size Indicator
(Refer to
 page 2-5 )
Paper Type Indicator
(Refer to
 page 2-7 )
Operation Indicators (Refer to
 page 2-3 )
Interface Indicator
(Refer to page 2-5 )
Downloaded From ManualsPrinter.com Manuals