Kyocera FS 3140MFP User Manual

2
Preparation before Use
2-15
NOTE: After all network related settings have been done, turn the machine  OFF and  ON again. This is mandatory 
to make the settings effective! NetWare
On/Off
Frame Type
AppleTalk On/Off
WSD-SCAN On/Off
WSD-PRINT On/Off
IPSec IPSec On/Off
Rule Setting On/Off
Secure 
Protocol SSL
On/Off
IPP Security IPP/IPP over SSL
IPPoverSSL only
HTTP Security HTTP/HTTPS
HTTPS only
LDAP Security Off
LDAPv3/TLS
LDAP over SSL
LAN Interface Auto
10Base-Half
10Base-Full
100Base-Half...

Preparation before Use
2-16
Installing Software
Ensure the printer is plugged in and connected to the PC  before installing the printer driver from the CD-ROM.
Installing the Software in Windows
If you are connecting this printer to a Windows PC, follow  the next steps to install the printer driver. The example 
shows you how to connect your printer to a Windows Vista PC.
NOTE: In Windows operating systems, you must be logged in  with administrator rights to install the printer driver.
You can use either...

2
Preparation before Use
2-17
The software install wizard starts up.
From this point, the procedure differs depending on your version of Windows and your connection method. 
Proceed to the correct procedure for your connection type.
• Express Mode
• Custom Mode
Express Mode
In Express Mode, the installer automatically detects the pr inter when it is turned on. Use Express Mode for standard 
connection methods.
1In the installation method  selection window, select  Express Mode. The print system detection...

Preparation before Use
2-18
NOTE: If the Found New Hardware Wizard appears, click  Cancel. If a hardware installation warning message 
appear, click  Continue.
3You can customize the pr int system name in the insta llation settings window. This will be the name displayed in 
the Printer window and in the printer  lists displayed in applications. Specify whether to share the print system 
name or set the print system as an existing printer and then click  Next.
IMPORTANT:  Step 3 only appears if the print...

2
Preparation before Use
2-19
Custom Mode
Use Custom Mode if you want to specify the printer port and select the software to be installed.
For example, if you do not want fonts installed on your computer to be replaced, select  Custom Mode and deselect 
the  Fonts  checkbox in the utility tab.
1Select  Custom Mode .
2Following the instructions in the inst all wizard window, select the software packages to be installed and the 
specify the port, etc.
For details, refer to Custom Installation in the...

Preparation before Use
2-20
4Double-click either  OS X 10.2 and 10.3 Only , OS X 10.4 Only or OS X 10.5 or higher  depending on your Mac 
OS version.
5Double-click  Kyocera OS X x.x .
6The printer driver installation program starts up.
7Choose Select Destination , Installation Type  and then install the printer driver as directed by the instructions 
in the installation software.
Downloaded From ManualsPrinter.com Manuals 

2
Preparation before Use
2-21
NOTE: In addition to  Easy Install, the  Installation Type  options include Custom Install , which allows you to 
specify the components to be installed.
IMPORTANT: In the Authenticate screen, enter the name and password used to log in to the operating system.
This completes the printer driver insta llation. Next, specify the print settings.
If an IP, AppleTalk or Bonjour connection is used, the settings below are required. If a USB connection is used, 
the printer is...

Preparation before Use
2-22
NOTE: AppleTalk icon is not displayed on Mac OS X 10.6.
For a Bonjour connection, click the de fault icon and select the printer for which Bonjour appears in Connection.
11Select the installed printer driver and click Add.
Downloaded From ManualsPrinter.com Manuals 

2
Preparation before Use
2-23
12Select the options available for the printer and click Continue.
13The selected printer is added. This completes the printer setup procedure.
Uninstalling Software (Windows PC)
The software can be uninstalled (removed) using the CD-ROM (Product Library) supplied with the printer.
IMPORTANT:  On Macintosh computers, because the printer setti ngs are specified using a PPD (PostScript Printer 
Description) file, the software cannot be uninstalled using the CD-ROM (Product...

Preparation before Use
2-24
5Click Uninstall . 
NOTE: When KMnet Viewer is installed, separate uninstallers  are launched for this application. Proceed with the 
uninstallation steps for this application as directed by the on-screen instructions.
The uninstaller starts.
6When Uninstall complete  screen appears, click Finish.
7If Restart Your System screen appears, select wh ether you restart your computer or not, and click Finish.
NOTE: The software can be uninstalled from the  Start menu.
Start the...