Kyocera FS 3140MFP User Manual

8
8-13
Default Setting (System Menu)
when you select an optional cassette ([Cassette 2, 3 or 
4])
6The Cassette 1 Set. menu appears.
7Press the U or V key to select [Cassette 1 Size].
8Press the OK  key. Cassette 1 Size appears.
9Press the U or V key to select the paper size. 
10Press the  OK key. The screen returns to the Cassette 1 
Set. menu.
11Press the U  or V key to select [Cassette 1 Type].
12Press the OK  key. Cassette 1 Type appears. 
13Press the U or V key to select the paper type.
14Press the...

8-14
Default Setting (System Menu)
Paper Size and Media Type Setup for Multi Purpose Tray
Select size and media type for multi purpose tray. Set up frequently-used size and media type before use. 
The available paper sizes and media types are shown in the table below.
NOTE: To change to a media type other than Plain, refer to  Paper Weight on page 8-16
Use the procedure below to select the pape r size and media type for manual paper feed.
1In the Sys. Menu/Count. menu, press the U or V  key to 
select...

8
8-15
Default Setting (System Menu)
6Press the OK key. The MP Tray Set. menu appears. 
7Press the U or V key to select [MP Tray Size].
8Press the OK  key. MP Tray Size appears.
9Press the U or V key to select the paper size.
10Press the OK  key. The screen returns to the MP Tray 
Set. menu.
11Press the U  or V key to select [MP Tray Type].
12Press the OK  key. MP Tray Type appears.
13Press the U or V key to select the paper type.
14Press the OK  key. Completed.  is displayed and the 
screen returns to...

8-16
Default Setting (System Menu)
Paper Weight
The machine is capable of printing under the optimum setting for the type of paper being used. A different paper type 
setting can be made for each paper source including the MP tray. Not only can preset paper types be selected, but it 
is also possible for you to define and select customized paper types. Paper type can be changed using the printer 
driver and the operation panel. The following types of paper can be used.
IMPORTANT: If selecting the paper...

8
8-17
Default Setting (System Menu)
1In the Sys. Menu/Count. menu, press the U or V  key to 
select [Common Settings].
2Press the  OK key. The Common Settings menu appears.
3Press the U  or V key to select [Orig./Paper Set.].
4Press the OK  key. The Orig./Paper Set. menu appears.
5Press the U or V key to select [Media Type Set.].
6Press the OK  key. Media Type Set. menu appears. 
7Press the U or  V key to select the paper type for which 
you want to make settings.
8Press the OK  key. The menu for the...

8-18
Default Setting (System Menu)
12Press the OK key. Completed.  is displayed and the 
screen returns to the menu for the selected paper type.
When the selected paper type is [Custom 1 to 8], you can 
further set whether to enable or disable duplex and the 
name of the custom paper type.
13Press the U  or V key to select [Duplex].
14Press the OK  key. The Duplex menu appears.
15Press the U or V key to select whether to enable or 
disable duplex.
16Press the OK  key. Completed.  is displayed and the...

8
8-19
Default Setting (System Menu)
Media for Auto Selection
When [Auto] is selected in Paper Selection, the paper source that is automatically selected can be limited by media 
types.If Plain  is selected, the paper source with plain paper loaded in the specific size is  selected. Select [All Media 
Types] for the paper source with any kind of paper loaded in the specific size.
Use the procedure below to select the paper  size and media type used by Auto Selection.
1In the Sys. Menu/Count. menu, press...

8-20
Default Setting (System Menu)
Default Paper Source
Select the default paper source from Cassette 1-4 and Multi Purpose Tray.
NOTE: [Cassette 2], [Cassette 3] and [Cassette 4] are displayed when the optional paper feeder installed.
Use the procedure below to select the default paper source.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [Common Settings].
2Press the  OK key. The Common Settings menu appears.
3Press the U  or V key to select [Orig./Paper Set.].
4Press the OK  key....

8
8-21
Default Setting (System Menu)
Special Paper Action
When printing on Prepunched, Preprint, and Letterhead, punch-holes might not be aligned or the print direction might 
be upside-down depending on how originals are set and the combination of copying functions. In such a case, select 
[Adj. PrintDirect] to adjust the print direction. When paper orientation is not important, select [Speed Priority].
The table below lists the availa ble settings and their details.
If you select [Adj. PrintDirect],...

8-22
Default Setting (System Menu)
2Press the OK key. The Common Settings menu appears. 
3Press the U  or V key to select [Orig./Paper Set.]. 
4Press the  OK key. The Orig./Paper Set. menu appears. 
5Press the U  or V key to select [SpcialPaper Act.]. 
6Press the OK  key. SpcialPaper Act. appears. 
7Press the U or V key to select [Adj. PrintDirect] or 
[Speed Priority]. 
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Orig./Paper Set. menu. 
Common Settings:a  b...