Kyocera FS 3140MFP User Manual

8
8-33
Default Setting (System Menu)
4The Timer Settings menu appears.
5Press the U or V key to select [Auto Err. Clear].
6Press the OK  key. Auto Err. Clear appears.
7Press the U or V key to select [Off] or [On].
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Timer Settings menu.
• Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of ti me to wait before automatically clearing errors. Options are 
between 5 and 495 seconds (every five  seconds). The...

8-34
Default Setting (System Menu)
A login screen will appear. Then, enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
4The Timer Settings menu appears.
5Press the U or V key to select [Err. Clear Timer].
6Press the OK  key. Err. Clear Timer appears.
7Press the U or V key to set the Error Clear Timer. Set 
the amount of time before clearing errors in seconds. 
You cannot use the numeric keys to enter this value.
8Press the OK  key....

8
8-35
Default Setting (System Menu)
2Press the OK key. The Common Settings menu appears.
3Press the  U or V  key to select [Timer  Setting], and press 
the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
4The Timer Settings menu appears.
5Press the U or V key to select [Auto Sleep].
6Press the OK  key. Auto Sleep appears.
7Press the U or V key to select [Off] or [On].
8Press the OK  key....

8-36
Default Setting (System Menu)
2Press the OK key. The Common Settings menu appears.
3Press the  U or V  key to select [Timer  Setting], and press 
the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
4The Timer Settings menu appears.
5Press the U or V key to select [Sleep Timer].
6Press the OK  key. Sleep Timer appears.
7Press the U or V key to set the Sleep Timer. Set the 
amount of time...

8
8-37
Default Setting (System Menu)
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting. 
NOTE: Refer to page 8-42  for the default settings.
• Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto p anel reset setting. The default setting is On.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [Common Settings].
2Press the  OK key. The Common Settings menu...

8-38
Default Setting (System Menu)
7Press the U or V key to select [Off] or [On].
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Timer Settings menu.
• Panel Reset Timer
If you select [On] for  Auto Panel Reset, set the amount of time to wait before  Auto Panel Reset. Options are between 
5 and 495 seconds (every five se conds). The default setting is 90 seconds.
NOTE: If you select [Off] for  Auto Panel Reset, the time display does not appear.
Use the procedure below to set...

8
8-39
Default Setting (System Menu)
6Press the OK key. Panel Reset Timer appears.
7Press the U or V  key to set the Panel Reset Timer. Set 
the amount of time before resetting the message display 
on the panel in seconds. You cannot use the numeric 
keys to enter this value.
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Timer Settings menu.
Low Power Timer
You can specify the amount of ti me to wait before Low Power Mode.
Specify a value from 1 - 240 minutes (1 mi nute...

8-40
Default Setting (System Menu)
5Press the U or V key to select [Low Power Timer].
6Press the OK  key. Low Power Timer appears.
7Press the U or V key or numeric keys to set the Low 
Power Timer. Set the amount of time before entering the 
low power state in minutes.
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Timer Settings menu.
Unusable Time
You can specify the prohibition period to use.
NOTE: Even during unusable time, the machine can be operated by entering the...

8
8-41
Default Setting (System Menu)
4The Timer Settings menu appears.
5Press the U or V key to select [Unusable Time].
6Press the OK  key. Unusable Time appears.
7Press the U or V key to select [On].
8Press the OK  key. Start Time appears.
9Press the U or V key to set the Start Time.
10Press the OK  key. End Time appears.
11Press the U or V key to set the End Time.
12Press the OK  key. Unlock Code appears.
13Press the U or V key or numeric keys to set the unlock 
code.
14Press the OK  key. Completed....

8-42
Default Setting (System Menu)
Function Defaults
Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings  such as copying and sending. Setting the frequently-used values as defaults 
makes subsequent jobs easier. 
Color Selection
Select the default color mode setting. T he available default settings are shown below.
Use the procedure below to select the default color mode setting.
1In the Sys. Menu/Count. menu,...