Kyocera FS 2020DN User Manual

7-64Using the Operation Panel
Security
The security functions can be set up to protect printer operation and the 
print data.
The options available in Security are as follows:
•ID (Administrator ID input)
• Password (Administrator password input)
• I/F Block (Interface (exter nal device) block setting)
• NetWare (NetWare setting)
• AppleTalk (AppleTalk setting)
• IPP (IPP setting)
• SSL Server (SSL Server setting)
• IPSec (IPSec setting)
• Security Level (Security level setting)
1Press  [MENU] .
2Press...

Using the Operation Panel7-65
Password (Administrator Password input)
To set up the Security functions, you must enter an administrator ID and 
administrator password. For information on how to set the administrator 
password, refer to Admin (Administrator settings)  on page7-78.
1When you entered the ID in the previous step (ID (Administrator ID 
input)), the message display shows 
Password (Administrator 
password input) and a blinking cursor ( _).
2Press  U or  V to increase or decrease,...

7-66Using the Operation Panel
USB Device (USB interface setting)
This locks and protects the USB interface. The default setting is 
Unblock.
1Press Z while  >I/F Block >  is displayed. >>USB Device  
appears.
2Press  [OK]. A blinking question mark ( ?) appears.
3Select  Block or Unblock  using U or  V.
4Press  [OK].
5Press  [MENU] . The display returns to  Ready.
Parallel I/F (Parallel interface setting)
This locks and protects the parallel interface. The default setting is 
Unblock .
1Press Z while...

Using the Operation Panel7-67
NetWare (NetWare setting)
NetWare is a PC-based network operating system specifically for 
servers. 
NetWare is a client-server system that operates by installing the 
NetWare OS on the server and dedicated client modules (NetWare 
clients) on the client machines (running MS-DOS, OS/2, Windows, etc.). 
The basic network layer protocol used is NetWares own IPX 
(Internetwork Packet eXchange)/SPX (Sequenced Packet eXchange), 
but the system also supports TCP/IP. 
The feature...

7-68Using the Operation Panel
AppleTalk (AppleTalk setting)
AppleTalk is a communications protocol used primarily on Macintosh 
computers and also refers to the Mac OS network functions. 
AppleTalk assigns 24-bit network addresses (a 16-bit network section 
and an 8-bit node address) that are used to identify devices (computers, 
printers, etc.) on the network. 
When the power is turned on, a broadcast signal is sent out onto the 
network and the addresses and machine names are automatically 
assigned....

Using the Operation Panel7-69
SSL Server (SSL Server setting)
SSL (Secure Sockets Layer) refers to a protocol used to encrypt 
information sent and received over a network. SSL can currently be used 
to encrypt data such as the WWW or FTP files widely used on the 
Internet so that privacy-related information, credit card numbers, 
corporate secrets and other confidential information can be sent and 
received safely.
SSL servers use this protocol to authenticate servers and clients.
The default setting...

7-70Using the Operation Panel
3DES (SSL Server 3DES setting)
3DES (Triple Data Encryption Standard) is a high level of encryption in 
which DES encryption is repeated threefold.
The default setting is Off.
1Press  Z while  >SSL Server On >  is displayed. >>3DES appears.
2Press [OK]. A blinking question mark ( ?) appears.
3Select  On or  Off  using  U or  V.
4Press  [OK].
5Press  [MENU] . The display returns to  Ready.
AES (SSL Server AES setting)
AES (Advanced Encryption Standard)  was developed to...

Using the Operation Panel7-71
HTTPS (SSL Server HTTPS setting)
HTTPS (Hyper Text Transfer Protocol Secure) is a protocol that adds 
SSL data encryption, message authentication and a digital signature 
function to the HTTP protocol used for data transfer between WWW 
servers and clients.
S-HTTP is a similar protocol, but HTTPS differs in that it uses SSL.
The default setting is Off.
1Press  Z while  >SSL Server On >  is displayed. >>HTTPS 
appears.
2Press  [OK]. A blinking question mark ( ?) appears....

7-72Using the Operation Panel
Job Accounting (Job Accounting 
selection/setting)
Job Accounting is a function that allows the number of pages used to be 
managed by each department to be managed through the use of entered 
account IDs. 
Job accounting on this machine offers the following features:
• Support for up to 100 departments
• Department codes up to 8 digits long from 1 to 99999999
• Collective print management for the same department code
• Totaling of the number of pages used for each...

Using the Operation Panel7-73
Password (Administrator Password input)
To set up Job Accounting, you must enter an administrator ID and 
administrator password. For information on how to set the administrator 
password, refer to Admin (Administrator settings) on page -78 .
1After entering the ID in the previous step (ID (Administrator ID 
input)), the message display shows  Password (Administrator 
password input) and a blinking cursor ( _).
2Press  U or  V to increase or decrease, respectively, the...