Kyocera FS 2020DN User Manual

7-44Using the Operation Panel
4Select the print density from five steps from 01 (light) to  05 (dark) 
using the  U or  V.
5Press  [OK].
6Press  [MENU] . The display returns to  Ready.
Page Set (Setting pagination)
In Page Set menus, you can set the number of copies, page orientation, 
and other settings regarding pagination.
The options available in Page Set are as follows:
•Copies (Number of copies)
• Orientation (Print orientation)
• LF Action (Linefeed)
• CR Action (Carriage-Return)
• Wide A4 (Wide...

Using the Operation Panel7-45
1Press Z while  >Page Set   >  is displayed.
2Press  U or  V repeatedly until  >>Orientation  appears.
3Press [OK]. A blinking question mark ( ?) appears.
4Select  Portrait  or Landscape  using U or  V. 
5Press  [OK].
6Press  [MENU] . The display returns to  Ready.
LF Action (Linefeed)
This procedure instructs the printer what to do when it receives a 
linefeed code (0AH). 
•LF only : Linefeed is performed (Default).
• CR and LF : A linefeed and carriage return are...

7-46Using the Operation Panel
3Press [OK]. A blinking question mark ( ?) appears.
4Select  On or  Off  using  U or  V. 
5Press  [OK].
6Press  [MENU] . The display returns to  Ready.
>>Wide A4
? Off
Downloaded From ManualsPrinter.com Manuals 

Using the Operation Panel7-47
Network (Network settings)
This printer supports TCP/IP and TCP/IP (IPv6) protocols.
IP is an abbreviation for Internet Protocol. This printer routinely uses the 
TCP/IP (IPv4) protocol, but provides a separate setting for the next-
generation IP, IPv6. 
TCP/IP (IPv4) uses 32-bit IP addresses, but the rapid growth in the 
number of Internet users has resulted in a shortage of IP addresses. 
IPv6 was developed to expand the range of available IP addresses by 
using 128-bit...

7-48Using the Operation Panel
4Select On or  Off  using  U or  V.
5Select  On and press  [OK]. The display changes to the settings 
shown below.
DHCP (DHCP setting)
DHCP (Dynamic Host Configuration Protocol) is the protocol that 
assigns the information required to establish a network connection when 
a host attempts to connect to the network (Internet). This information 
includes the IP address of the local node and the default router (the 
router in the hosts own network system) and the DNS (Domain...

Using the Operation Panel7-49
Subnet Mask (Subnet mask setting)
The subnet mask is a way of augmenting the network address section of 
an IP address. 
A subnet mask represents all network address sections as 1 and all host 
address sections as 0. The number of bits in the prefix indicates the 
length of the network address. The term prefix refers to something 
added to the beginning and, in this context, indicates the first section of\
 
the IP address. 
When an IP address is written, the length of the...

7-50Using the Operation Panel
6Press [MENU] . The display returns to  Ready.
Bonjour (Bonjour setting)
Bonjour, also known as zero-configuration networking, is a service that 
automatically detects computers, devices and services on an IP network. 
Bonjour, because an industry-standard IP protocol is used, allows 
devices to automatically recognize each other without an IP address 
being specified or DNS server being set. 
Bonjour also sends and receives network packets by UDP port 5353. If a 
firewall...

Using the Operation Panel7-51
RA(Stateless) (RA (Stateless) setting)
The IPv6 router communicates (transmits) information such as the global 
address prefix using ICMPv6. This information is the Router 
Advertisement (RA).
ICMPv6 stands for Internet Control Message Protocol, and is a IPv6 
standard defined in the RFC 2463 Internet Control Message Protocol 
(ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification.
1Press  Z while  >TCP/IP (IPv6) On >  is displayed.
2Press U or  V repeatedly...

7-52Using the Operation Panel
Device Common (Selecting/Setting the 
common device)
Selects/sets all the functions in this printer.
The options available in Device Common are as follows:
•MSG Language (Selecting the message language)
• Buzzer (Alarm (Buzzer) setting)
• RAM Disk Mode (Using the RAM disk)
• Hard Disk (Using the optional hard disk)
• Memory Card (Using the memory card)
• Error Handling (Error detection setting)
• Timer (Timer setting)
1Press  [MENU] .
2Press U or  V repeatedly until  Device...

Using the Operation Panel7-53
Buzzer (Alarm (Buzzer) setting)
This function uses tones to notify the user of printer operations and the 
printer status. This setting is useful, for example, when the printer is 
located some distance from the user.
The options available in Buzzer are as follows:
•Key Confirm. (Key confirmation tone setting)
• Job End (Job completed tone setting)
• Ready (Preparation completed tone setting)
• Error (Error tone setting)
1Press  Z while  Device Common >  is displayed....