Kyocera FS 2020DN User Manual

7-24Using the Operation Panel
Deleting a Private/Stored Job
You can individually delete stored jobs by performing the following 
procedure. Jobs saved using Private Print will be automatically deleted if 
you turn the power off after printing, but jobs saved using Stored Job will 
not be deleted automatically.
1Follow steps 1 through 6 in the above section.
2When the title of the job to be printed is displayed (Agenda, in this 
example), press  [OK]. Enter the four-digit access code entered in 
the...

Using the Operation Panel7-25
Counter (Viewing the counter value)
This only displays the total number of pages printed. You cannot change 
the displayed number.
1Press [MENU] .
2Press U or  V repeatedly until  Counter > appears.
3Press Z. >Printed Pages  appears as he total number of pages 
printed. (E.g.:  2000)
4Press  [MENU] . The display returns to  Ready.
Counter        >
>Printed Pages
           0002000
Downloaded From ManualsPrinter.com Manuals 

7-26Using the Operation Panel
Paper Settings
This sets the paper size and type for the MP tray and cassettes from 
which paper is supplied.
The options available in Paper Settings are as follows:
•MP Tray Size (Setting MP tray paper size)
• MP Tray Type (Setting the MP tray paper type)
• Cassette (1 to 4) Size (Setting the cassette paper size)
• Cassette (1 to 4) Type (Setting the cassette paper type)
• Type Adjust (Creating custom paper type)
• Reset Type Adjust (Resetting the custom paper type)
1Press...

Using the Operation Panel7-27
MP Tray Size (Setting MP tray paper size)
When you use the MP tray, you should set the MP tray size to the paper 
size that is used to format the job to print. If the sizes do not match, 
printing will not be performed on the correct size paper. 
The default setting is Letter size for the U.S. and Canada and  A4 for 
other countries. For more information about the paper sizes that you can 
feed from the MP tray, refer to  Paper Specifications on page2-2.
1Press  Z while...

7-28Using the Operation Panel
3Press [OK]. A blinking question mark ( ?) appears.
4Press  U or  V to display the desired paper type. The message 
display toggles through the following paper types:
PLAIN
TRANSPARENCY
PREPRINTED
LABELS
BOND
RECYCLED
VELLUM
ROUGH
LETTERHEAD
COLOR
PREPUNCHED
ENVELOPE
CARDSTOCK
THICK
HIGH QUALITY
CUSTOM 1  (to 8)
5Press  [OK].
6Press  [MENU] . The display returns to  Ready.
Cassette (1 to 4) Size (Set ting the cassette paper size)
To set the standard sizes A5, A4, B5,...

Using the Operation Panel7-29
Custom Paper Size
If you use a non-standard size paper, load the paper and select the 
paper size dial to OTHER (refer to the Loading Paper section in the 
Operation Guide ).
Setting the Paper Size from the Operation Panel
Use the operation panel to set the size of paper loaded in the cassette 
on the printer. This menu appears if the size dial for the cassette is set to 
Other.
1Press  Z while  Paper Settings >  is displayed.
2Press U or  V repeatedly until  >Cassette Size...

7-30Using the Operation Panel
Unit (Selecting the unit of measurement)
1Press Z.
2Press  U or  V repeatedly until  >>Unit appears. The unit of 
measurement can be selected between millimeters and inches. The 
current unit of measurement is displayed (the default setting is  mm).
3Press  [OK]. A blinking question mark ( ?) appears.
4Select  mm or  inch  using  U or  V. 
5Press  [OK]. 
Set the dimensions of the paper as described in the next section.
Entering the Width and Length
Enter the paper size for...

Using the Operation Panel7-31
Cassette (1 to 4) Type (Setting the cassette paper 
type)
By setting a paper type (plain, recycled, etc.) for the paper cassette, you 
can automatically select the paper in the paper cassette according to the 
paper type you command on the printer driver. The default setting is 
plain paper for all paper cassettes.
If the PF-310 optional paper feeder is installed, use the same procedure 
to setting the cassette paper type.
For more information about paper types that you can...

7-32Using the Operation Panel
Type Adjust (Creating custom paper type)
The following describes the procedure used to set a user-defined paper 
type for the printer. Eight custom user settings may be registered. After 
having been set, any of these may be called up when setting the paper 
type for a paper source.
The paper weight and duplex path can be set (refer to Paper Weight 
(Setting the paper weight)  on page7-32, and  Duplex Path (Setting the 
duplex path)  on page7-33) after selecting the paper...

Using the Operation Panel7-33
4Press U or  V to display the desired paper thickness. The display 
changes as shown below. For details of the default setting for each 
paper type, refer to  Paper Type on page2-11.
Light
Normal 1
Normal 2
Normal 3
Heavy 1
Heavy 2
Heavy 3
Extra Heavy
5Press  [OK].
6Press  [MENU] . The display returns to  Ready.
Duplex Path (Setting the duplex path)
1Display the custom paper type (refer to  Type Adjust (Creating 
custom paper type)  on page7-32) and press  Z.
2Press  U or...