Kyocera FS 1116 User Manual

OPERATION GUIDE4-1
4 Copy Functions
Basic Copying Procedure
To change the default settings for the machine, refer to System Settings.
1Turn the machine on. At the end of warm-up, the ready screen will be displayed.
2Select from the copier’s various functions.
3Press [Copy Mode] to select the desired 
mode.
4Adjusting Copy Exposure.
The Copy Exposure (density) is adjusted 
manually. To make the copy darker, press 
[Darker]. To make the copy lighter, press 
[Lighter].
Mode Description
(text and photo...

Copy Functions 
4-2OPERATION GUIDE
5Enter the number of copies required. Up to 
99 can be entered.
6Open the original cover and place the 
original face down onto the platen against 
the left rear corner of the platen. Close the 
original cover.
7Press [Start] . Copying begins immediately.
To cancel copying, press  [Stop/Clear].
Completed copies are delivered to the 
output tray.
Placing Originals in the Document Processor
The document processor automatically feeds and scans multiple sheet originals one...

Copy Functions 
OPERATION GUIDE4-3 Originals to Avoid
Be sure not to use the following originals in the document processor.
• Originals with punched holes or perforations.
• Transparencies.
• Soft originals such as carbon or vinyl paper, or other originals that are curled, 
wrinkled or creased.
• Irregularly shaped originals, wet originals, or originals that have adhesive tape 
or glue on them.
• Originals with clips or staples. Remove the clips or staples, and straighten any 
curls, wrinkles or creases,...

Copy Functions 
4-4OPERATION GUIDE
Placing a Thick Original on the Platen
When copying from an original which 
cannot be placed in the document 
processor (books, magazines, etc.), open 
the document processor and place the 
original directly on the platen.
Close the document processor after use.
Zoom Copies
It is possible to change the zoom ratio in 
order to make copies of an enlarged or 
reduced size. The following modes are 
available for selecting the desired zoom 
ratio.
NOTE: Fit To Paper is used...

Copy Functions 
OPERATION GUIDE4-5 To start copying, place the original on the platen and press [Start].
Variable Zoom
Perform the following procedure to make settings for the Variable Zoom mode.
1Press [Zoom].
2Press W or X to select Custom and press [OK].
3Enter the desired ratio using numeric keys.
4Press [OK]. The message display returns to the ready screen. The new zoom ratio 
is registered.
To start copying, place the original on the platen and press [Start].
Collate Mode
Multiple originals can be...

Copy Functions 
4-6OPERATION GUIDE
4Once all of the originals have been 
scanned, press  . Copying starts. 
Scanned pages are printed.
Combine Mode
The images from either 2 or 4 originals can be reduced and combined onto a single 
copy.
NOTE: Combine Mode does not support the Collate Mode or Zoom Mode.
When an original set in the Document Processor, the Combine mode automatically 
starts scanning all the page.
1Press [Combine] to select the desired 
mode.
2Enter the desired number of copies.
3Place the...

OPERATION GUIDE5-1
5 Scanning Functions
This product allows you to operate the scanner from within a TWAIN or plug-in 
software application. As the scanner driver is not a stand-alone software, it has to be 
started from within a TWAIN-compliant software application and then the scanner 
driver is able to scan and load the image to your computer. The command to start 
the scanner driver may vary due to different software applications. To check the 
correct command, please refer to the user manual of your...

Scanning Functions 
5-2OPERATION GUIDE
9Click Preview or Scan to preview or scan your document(s).
Selecting the Scan Method
Select how you want to scan on the Scan Method drop-down menu.
Selecting Image Type
Select Image Type through the mode from the scanner user interface for your own 
purpose. 
Selecting the Resolution
The higher the resolution value is, the finer the image will be. A higher resolution 
results in a larger file size and longer scanning time.
Preview
Click Preview to scan a document...

Scanning Functions 
OPERATION GUIDE5-3
Enhancing Your Image
Brightness
Adjusts the lightness or darkness of an image. The higher the value, the brighter the 
image.
Contrast
Adjusts the range between the darkest and the lightest shades in the image. The 
higher the contrast, the bigger the different gray scales.
Invert
The invert command reverses the brightness and the color in the image. For color 
images, each pixel will be changed into its complementary color at the command of 
Invert.
Mirror
The...

Scanning Functions 
5-4OPERATION GUIDE Color Adjustment
Click the Color Adjustment button to enable the button for the Hue, Saturation, and 
Lightness feature.
NOTE: The Advanced Settings button must be enabled in order to use the Hue 
Saturation, and Lightness feature.
Auto Level
Click the Auto Level button to add shadow to reveal more details in an image.
Advanced Settings
Click the Advanced Settings button to view the advanced settings buttons for 
Highlight/Shadow Levels, Curves, Color Balance,...