Kyocera FS 1028MFP User Manual

Default Setting (System Menu) 
OPERATION GUIDE8-53
8
4Press the OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
6Press the  OK key. The Detail Setting menu 
appears.
7Press the  U or V  key to select [Color TIFF Comp.]. 
8Press the  OK key. Color TIFF Comp. appears. 
9Press the  U or  V key to select [TIFF V6] or [TTN2]. 
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
XPS FitTo Page
Set the default...

Default Setting (System Menu) 
8-54OPERATION GUIDE
2Press the OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
4Press the  OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
6Press the  OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [XPS FitTo Page]. 
8Press the  OK key. XPS FitTo Page appears. 
9Press the  U or  V key to select [On] or [Off]. 
10Press the  OK key.  Completed.  is...

Default Setting (System Menu) 
OPERATION GUIDE8-55
8
Login Operation
Specify the character entry method in the login screen that appears when user management is enabled.
Use the procedure below to adjust the Login Operation.
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Login Operation].
4Press the  OK key. Login Operation appears.
5Press the U  or V key to select [Use Numeric...

Default Setting (System Menu) 
8-56OPERATION GUIDE
Copy Settings
The following settings are available for copying functions.
• Photo Processing …8-56
• Paper Selection …8-57
• Auto Paper Selection …8-58
• Auto % Priority …8-58
• Select Key Set …8-60
NOTE: If user login administration is enabled, you can only change the settings by logging in with 
administrator privileges.
Photo Processing
Set the resolution for copying a photo.
Use the procedure below to set Photo Processing. 
1In the Sys. Menu/Count....

Default Setting (System Menu) 
OPERATION GUIDE8-57
8
5Press the U or  V key to select [Dithering(Normal)] 
or [Dithering(Rough)].
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Copy menu.
Paper Selection
Set the default paper selection. The table below shows the available settings.
Use the procedure below to set the default paper selection.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Copy].
2Press the  OK key. The Copy menu appears.
3Press the  U or  V...

Default Setting (System Menu) 
8-58OPERATION GUIDE
Auto Paper Selection
If [Auto] is selected for Paper Selection, set the paper size selection method when the zoom changes. The table 
below shows the available settings.
Use the procedure below to specify the ac tion performed for Auto Paper Selection.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Copy].
2Press the OK key. The Copy menu appears. 
3Press the  U or  V key to select [AutoPaperSelect.].
4Press the  OK key....

Default Setting (System Menu) 
OPERATION GUIDE8-59
8
The table below shows the available settings. The default setting is Off.
Use the procedure below to specif y the automatic zoom priority.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Copy].
2Press the OK key. The Copy menu appears. 
3Press the  U or  V key to select [Auto % Priority.].
4Press the  OK key. AutoPaperSelect. appears.
5Press the  U or  V key to select [Off] or [On].
6Press the  OK key.  Completed.  is displayed and...

Default Setting (System Menu) 
8-60OPERATION GUIDE
Select Key Set
If you register a function to the Left Select key or Right Select  key, you can quickly set the function when using 
copy functions. 
You can register one of the following functions to each key. 
•None
• Paper Selection
• Collate
•Duplex
•Zoom
• Combine
• Original Size
• Orig.Orientation
• Original Image
•Density
• EcoPrint
• Continuous Scan
• File Name Entry
• JobFinish Notice
• Print Override
Use the procedure below to set Select Key...

Default Setting (System Menu) 
OPERATION GUIDE8-61
8
4Press the OK key. Select Key Set. appears. 
5Press the  U or  V key to select [Left] or [Right]. 
6Press the  OK key. This displays the function 
selection screen for the flex ible key selected in step 
5. The screen shown is the one when [Left] is 
selected.
7Press the  U or  V key to select the function you 
want to register to the flexible key.
8Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Copy menu.
IMPORTANT: If...

Default Setting (System Menu) 
8-62OPERATION GUIDE
Sending Settings
The sending settings allow you to specify the following sending function options.
• Select Key Set …8-62
• DestinationCheck …8-64
NOTE: If user login administration is enabled, you  can only change the settings by logging in with 
administrator privileges.
Select Key Set
If you register a function to the Left Select key or Right Select  key, you can quickly set the function when using 
sending functions. 
You can register one of the...