Kyocera FS 1028MFP User Manual

Default Setting (System Menu) 
OPERATION GUIDE8-43
8
8Press the OK key.  Completed.  is displayed and the 
screen returns to the Function Default menu. 
EcoPrint
Select the EcoPrint default. The tabl e below shows the available settings.
NOTE: Refer to page 4-10 for EcoPrint.
Use the procedure below to set the default EcoPrint setting.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to...

Default Setting (System Menu) 
8-44OPERATION GUIDE
6Press the OK key. EcoPrint appears. 
7Press the  U or  V key to select [Off] or [On]. 
8Press the  OK key.  Completed.  is displayed and the 
screen returns to the Function Default menu. 
2 in 1 Layout
Select the default value for layout when [2 in 1] is sele cted for Combine. Items available for the default value are 
as follows: 
Use the procedure below to select  the default value for layout. 
1In the Sys. Menu/Count. menu, press the  U or  V 
key to...

Default Setting (System Menu) 
OPERATION GUIDE8-45
8
6Press the OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [2 in 1 Layout]. 
8Press the  OK key. 2 in 1 Layout appears. 
9Press the  U or  V key to select [ g   L to R  f   T to 
B] or [ e   R to L].  
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
4 in 1 Layout
Select the default value for layout when [4 in 1] is sele cted for Combine. Items available for the default...

Default Setting (System Menu) 
8-46OPERATION GUIDE
2Press the OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
4Press the  OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
6Press the  OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [4 in 1 Layout]. 
8Press the  OK key. 4 in 1 Layout appears. 
9Press the  U or  V key to select [ h   Right then 
Down], [i    Down then Right], [ j...

Default Setting (System Menu) 
OPERATION GUIDE8-47
8
Border Line
Select the default value for border line when [2 in 1] is selected for Combine. Items available for the default value 
are as follows: 
Use the procedure below to select the default value for border line.
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
4Press the  OK key. The Function Default menu...

Default Setting (System Menu) 
8-48OPERATION GUIDE
8Press the OK key. Border Line appears. 
9Press the  U or  V key to select [  None], [ l   Solid 
Line], [ m   Dotted Line] or [ n   Positioning Mark]. 
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
Orig. Binding
Select the default value for the binding edge of the orig inal when [2-sided>>1-sided] or [2-sided>>2-sided] is 
selected for Duplex. Items available for the default value are as follows:...

Default Setting (System Menu) 
OPERATION GUIDE8-49
8
4Press the OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
6Press the  OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [Orig. Binding]. 
8Press the  OK key. Orig. Binding appears. 
9Press the  U or  V key to select [ o   Left/Right] or
 [  p   Top]. 
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
Function Default:a  b...

Default Setting (System Menu) 
8-50OPERATION GUIDE
Finish Binding
Select the default value for the binding edge of the finished copies when [1-sided>>2-sided] or [2-sided>>2-
sided] is selected for Duplex. Items ava
ilable for the default value are as follows: 
Use the procedure below to select the default va lue for the binding edge of the finished copies. 
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press...

Default Setting (System Menu) 
OPERATION GUIDE8-51
8
8Press the OK key. Finish Binding appears. 
9Press the  U or V  key to select [  o   Left/Right] or [ p   
To p ] .   
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
Image Quality
Select the default value for image quality when File Format  is selected. Select the default value in the range from 
[1 Low(High Comp)] (high compression) to [5 High(Low Comp)] (low compression). 
Use the procedure below...

Default Setting (System Menu) 
8-52OPERATION GUIDE
6Press the OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [Image Quality]. 
8Press the  OK key. Image Quality appears. 
9Press the  U or  V key to select from [1 Low(High 
Comp)] to [5 High(Low Comp)]. 
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
Color TIFF Comp.
Set the default value for compression method for TIFF images handled by this machine. 
Use the procedure...