Kyocera FS 1028MFP User Manual

Default Setting (System Menu) 
OPERATION GUIDE8-93
8
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and password to log in.
4The Date Settings menu appears.
5Press the U or  V key to select [Date/Time].
6Press the  OK key. The screen to enter the date of 
Date/Time appears.
7Set the date.
Press the  Y or  Z key to move to the item (Year / 
Month / Day) you want to enter.
Press the  U or  V key to set each item.
8Press the  OK key. The...

Default Setting (System Menu) 
8-94OPERATION GUIDE
NOTE: If you try to change the date/time when a trial 
application ( page 8-151) is running, the  If you change 
Date/Time setting, trial f unctions will be unavailable. 
Are you sure? message is displayed. To change the 
date/time, press [Yes](the  Left Select key).
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
OPERATION GUIDE8-95
8
Date Format
Select the display format of year, month, and date. The year is displayed in Western notation.
Use the procedure below to select the date format.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Date Setting], and 
press the  OK key.
When you are performing user management and 
have not logged in, a login screen will...

Default Setting (System Menu) 
8-96OPERATION GUIDE
8Press the OK key.  Completed.  is displayed and the 
screen returns to th e Date Settings menu.
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
OPERATION GUIDE8-97
8
Time Zone
Set the time difference in the location you are from GMT. 
Use the procedure below to set the time difference.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Date Setting], and 
press the  OK key.
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and...

Default Setting (System Menu) 
8-98OPERATION GUIDE
8Press the OK key.  Completed.  is displayed and the 
screen returns to th e Date Settings menu.
NOTE: If you select a region that does not utilize 
summer time, the  summer time setting screen will not 
appear.
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
OPERATION GUIDE8-99
8
Summer Time
Set whether or not to apply summer time to the display of the date.
Use the procedure below to set Summer Time.
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Date Setting], and 
press the  OK key.
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID...

Default Setting (System Menu) 
8-100OPERATION GUIDE
8Press the OK key.  Completed.  is displayed and the 
screen returns to th e Date Settings menu.
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
OPERATION GUIDE8-101
8
Auto Error Clear
If an error occurs during printing, the print job stops to wait for the next step to be taken by the user. In the Auto 
Error Clear mode, automatically clear the error after a set amount of time elapses.
The following errors are  automatically cleared.
Cannot duplex print on this paper.
Send error.
Cannot connect to Authentication Server.
Incorrect account ID. Job is canceled.
Job Accounting restriction exceeded. Cannot print.
Job...

Default Setting (System Menu) 
8-102OPERATION GUIDE
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and password to log in, and 
press [Login] (the 
Right Select key).
4The Timer Settings menu appears.
5Press the U or  V key to select [Auto Err. Clear].
6Press the  OK key. Auto Err. Clear appears.
7Press the  U or  V key to select [Off] or [On].
8Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Timer...