Kyocera FS 1016MFP User Manual

							Troubleshooting 
OPERATION GUIDE10-11
9Close the Scan Unit pushing the Lever.
IMPORTANT: Take care not to place your 
fingers between the scan unit and the main 
body when the scan unit is closed. 
Document Processor
1Remove all of the originals from the Original 
Table.
2Open the Left Cover of the document 
processor.
3Remove the jammed original.
If the original is caught in the rollers or 
difficult to remove, proceed to the next step.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting 
10-12OPERATION GUIDE
4Remove the jammed original.
5Close the Left Cover.
6Place the originals.
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATION GUIDE11-1
11 Specifications
NOTE: Specifications are subject to change without notice.
Main Body
Item Specification
Printing system Electro-photographic
Originals Sheets of paper, books and 3-dimensional objects
Copy sizes
Cassette A4, B5 (JIS), A5, Folio, Legal, Letter, Oficio II
Manual Feed Tray A4, B5 (JIS), A5, Folio, Legal, Letter, Oficio II, 
Statement, Executive, A6, B6, B5 (ISO), Envelope 
#10, Envelope #9, Envelope Monarch, Envelope #6, 
Envelope C5, Envelope DL, 16K
Paper Types
Cassette
Plain paper, recycled paper, thick paper 60 to 105g/m
2
Manual Feed Tray
Plain paper, recycled paper, thick paper 60 to 163g/m2
Transparency, adhesive backed labels, envelopes and 
post cards supported
Paper feed source capacity
Cassette 250 sheets
Manual Feed Tray 1 sheet
Output Tray Capacity 100 sheets (face-down)
Warm-up time 25 seconds or less (power on), 20 seconds or less 
(sleep)
Memory 32MB
Ambient conditions
Temperature 10 to 32.5°C
Humidity 20 to 80%RH
Altitude Maximum 2,000m
Illumination 1,500lux or less
Power source 120V AC, 60Hz, 8.2A
220 to 240V AC, 50/60Hz, 3.9A
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications 
11-2OPERATION GUIDE
Copying Functions
Printing Functions
Dimensions (W) × (D) × (H) 476 × 392 × 489mm
Weight Approx. 15kg
Required space (W) × (D) 479 × 437mm
Item Specification
Copying speed
Platen (1:1) A4: 16copies/min.
A5/A6: 10copies/min.
B5: 14copies/min.
Letter: 17copies/min.
Legal: 15copies/min.
Document Processor 
(1:1)A4: 16copies/min.
A5: 10copies/min.
B5: 14copies/min.
Letter: 17copies/min.
Legal: 15copies/min.
First copy (1:1, Letter/A4)
Platen
12 seconds or less
Document Processor
14 seconds or less
Resolution
Scanning and Printing 600 × 600dpi
Continuous copying 1 to 99sheets
Zoom ratios Any 1% increment between 25 and 400%
Item Specification
Printing speed A4 16 pages per minute / Letter 17 pages per minute
First print 11 seconds or less
Resolution 600 × 600dpi
Host Interface USB: 1 port (Hi-speed USB)Item Specification
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications 
OPERATION GUIDE11-3
Scanning Functions
Document Processor
Environmental Specifications
Optional Equipment
Print Server (IB-110)
The print server (IB-110) provides an optimal printing network 
for Kyocera printers and copiers so that all users on the network 
can take advantage of them. The included utility, Virtual Link 
enables you to utilize the MFP’s scanning function.
The print servers USB interface offers easy external 
connections. Our original utility simplifies configuring your 
Ethernet network to offer printing to users.Item Specification
Scanning Speed
   (1:1, Letter/A4, 300dpi)Monochrome: 16scan/min.
Full Color or Grayscale: 4.8scan/min.
Resolution 600 × 300dpi
Color mode Full Color: 24bit/dot (each color)
Grayscale: 8bit/dot
Monochrome: 1bit/dot
File format PDF, TIFF, JPEG (8-Bit Gray mode, 24-Bit Color 
mode), BMP
Host Interface USB (TWAIN): 1 port (Hi-speed USB)
Item Specification
Original feed system Automatic feeding
Originals Sheets of paper
Original sizes Maximum: Legal
Minimum: Statement and A5R
Original paper weight 60 to 105g/m²
Maximum number of 
originals50 (50 to 80g/m²)
Item Specification
Duplex copying Not available
Paper feed Recycled paper made from 100% recycled pulp may 
be used with this product.
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications 
11-4OPERATION GUIDE Using Print Server (IB-110)
When the Print Server (IB-110) is connected, perform the following procedure. 
Connect and set up the machine, refer to the Print Servers Set up Guide.
Loading Software
1Follow steps 1 to 8 of Loading Software on page 3-2.
2Select Custom Mode and click Next.
3Select Network Port and click Next.
4Click Select All and click Next. The installation program installs the software.
5When the installation is complete, the Installation Completed Successfully 
window is displayed. Click Finish to proceed to Setting Print Port on page 11-4.
Setting Print Port
1The Kyocera Printer Installation Wizard window is displayed. Click Next.
2Select Kyocera FS-1016MFP and click Next.
3Select Create a new port and select KMprint Port from the drop down list.
4Click Next. The KMprint Add Port Wizard window is displayed.
5Enter the IP address and click Next.
6Enter the Destination Printer Port Name USB#### (# is an arbitrary character) and 
click Next. 
7Perform the procedures displayed on the installation wizard.
8When the installation is complete, the Printer Installed Successfully window is 
displayed. Click Finish to leave the install program and return to the disc main menu.
9Open the Printers Properties and confirm Enable bidirectional support of the Ports 
tab is checked.
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATION GUIDEINDEX-1
INDEX
Numerics
2 in 1 4-6
4 in 1 4-6
A
Accessing Menu Items xx
B
Buzzer 8-2
C
Cassette 2-2
CAUTION LABELS viii
Changing Function Defaults 8-4
Cleaning
Charger 9-3
Document Processor 9-6
Machine 9-6
Registration Roller 9-3
Collate Mode 4-5
Combine Mode 4-6
Connecting the Cables 3-1
Conventions xx
Copy Functions 4-1
Copy Setup 8-4
Copying 4-1
D
Document Processor 4-2
Document Processor Pad Replacement 9-7
Drum Control 8-3
Drum Refresh 8-3
Drum Reset 8-2
E
Eco Fuser 8-3
EcoPrint 4-6Error Messages 10-3
G
General Guidelines 10-1
I
Installation Precautions ix
L
Language 8-1
Loading paper
Cassette 2-2
Manual Feed tray 2-3
Loading Software 3-2
LoadingPaper 2-1
M
Machine Parts 1-1
Document Processor 1-2
Main Body 1-1
Message display 1-3
Operation Panel 1-3
Maintenance 9-1
Maintenance Messages 10-3
Manual Feed tray 2-3
O
Optional Equipment 11-3
P
Paper
Cassette 2-2
Manual Feed tray 2-3
Media Type 2-6
Paper Size 2-5
Paper Specifications 2-1
Preparation 2-2
Downloaded From ManualsPrinter.com Manuals 
						

							 
INDEX-2OPERATION GUIDE
Paper Jam 10-4
Document Processor 10-11
Inside Machine 10-9
Manual Feed Tray 10-6
Output Tray 10-4
Paper Cassette 10-5
Rear Cover 10-4
Paper length adjusting tab 2-2
Paper width adjusting tab 2-3
Photo mode 4-1
Power Cord 3-1
Power switch 3-2
Precautions for Use xi
Preparations 3-1
Print Server (IB-110) 11-3
Printing Functions 6-1
Basic tab 6-1
Effect tab 6-2
Layout tab 6-2
Paper tab 6-1
Q
QLINK 7-1
Copy Function Section 7-4
MFP Button Setting Section 7-2
Scan Function Section 7-6
Start the QLINK 7-1
R
Report Pages 8-5
S
Scanning Functions 5-1Image Type 5-2
Resolution 5-2
Scan Method 5-2
Shipping Lock 9-8
Sleep Mode 8-1
Specifications 11-1
Copying Functions 11-2
Document Processor 11-3
Environmental Specifications 11-3
Main Body 11-1
Printing Functions 11-2
Scanning Functions 11-3
Standard Zoom 4-4
System Settings 8-1
T
Text and Photo mode 4-1
Text mode 4-1
Toner Container Replacement 9-1
Toner Install 8-2
Troubleshooting 10-1
U
USB Cable 3-1
V
Variable Zoom 4-4, 4-5
Z
Zoom Copy 4-4
Downloaded From ManualsPrinter.com Manuals 
						

							For best results and machine performance, we recommend that you use only our original supplies 
for your products.
E1
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals