Konica Minolta PagePro 4650EN User Manual
Have a look at the manual Konica Minolta PagePro 4650EN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Configuration Menu Overview 51 ECONOMY PRINTSettingsON/OFF Select whether to print graphics with a reduced density by reducing the amount of toner that is used. If ON is selected, the amount of toner used is reduced when printing. If OFF is selected, the amount of toner used is not reduced when printing. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 52 MEMORY DIRECT This menu item appears when an optional hard disk kit or a CompactFlash card is installed, and INTERFACE MENU/MEMORY DIRECT is set to ENABLE. In addition, this menu item does not appear if public user access has not been permitted through authentication settings. For details on the authentica- tion settings, refer to the Reference Guide on the Utilities and Documentation CD-ROM. With this menu, settings for “memory direct” function can be specified. For details on memory direct, refer to “Memory Direct” on page 80. * This menu items appears when a USB memory device is plugged into the memory direct print port on the control panel. All factory default values are shown in bold. LIST OF FILESSelect the file that you wish to output, and then press the Menu/ Select key. If the file to be printed is in a folder, select the folder, and then press the Menu/Select key. Settings PRINT Select this setting to output a file. Settings CANCEL Select this setting to stop outputting and to return to the file list. LIST OF FILES* TYPE OF FILES MEMORY DIRECT Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 53 LETTER/ A4SettingsLETTER/LEGAL/EXECUTIVE/A4/ A5/A6/B5(JIS)/B6(JIS)/GOVT LETTER/STATEMENT/FOLIO/SP FOLIO/UK QUARTO/FOOLSCAP/ GOVT LEGAL/16K/KAI 16/KAI 32/ENV C5/ENV C6/ENV DL/ENV MONARCH/ENV CHOU#3/ENV CHOU#4/B5(ISO)/ENV #10/ENV YOU#4/JPOST/JPOST-D/CUSTOM Change the size of the paper. The value selected for SYS DEFAULT MENU /DEFAULT PAPER is displayed as the default for this setting. This menu item does not appear if the selected file type is a PDF file or an XPS file. DUPLEX: OFFSettingsLONG EDGE/SHORT EDGE/OFF Select whether to perform duplex printing. If LONG EDGE is selected, the page will be printed on both sides of the paper for long edge binding. If SHORT EDGE is selected, the page will be printed on both sides of the paper for short edge binding. If OFF is selected, duplex printing is not performed. This menu item appears only if a duplex is installed. COPIES:1Settings1-9999 Specify the number of copies to be printed (between 1 and 9999). Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 54 COLLATESettingsON/OFF Select whether to collate the copies. If ON is selected, collated printing is performed. If OFF is selected, collated printing is not performed. This menu item appears only if an optional hard disk kit or a CompactFlash card of 1GB or more is installed. MAIN TRAYSettingsSUB TRAY/MAIN TRAY/OFFSET Select the output tray and finishing settings. When SUB TRAY is selected, the paper is fed to the sub output tray. When MAIN TRAY is selected, the paper is fed to the main output tray. When OFFSET is selected, the paper is fed to the sub output tray with each copy slightly shifted. This menu item appears only if the optional offset tray is installed. TYPE OF FILESSettingsPDF,XPS,JPEG,TIFF/PDF,XPS Select the type of files to be displayed. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 55 INTERFACE MENU With this menu, interface settings can be specified. Restart the printer after changing settings in the ETHERNET menu. JOB TIMEOUT INTERFACE MENU ETHERNETTCP/IPENABLE IP ADDRESS* SUBNET MASK* DEFAULT GATEWAY* DHCP* HTTP*ENABLE FTP*ENABLE TELNET* BONJOUR*ENABLE DYNAMIC DNS*ENABLE IPP*ENABLE RAW PORT*ENABLE BIDIREC- TIONAL MEMORY DIRECT** BOOTP* ARP/PING* Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 56 * These menu items appear when INTERFACE MENU/ETHERNET/ TCP/IP/ENABLE is set to YES. ** This menu item appears only if an optional hard disk kit or a Com- pactFlash card is installed. SLP*ENABLE SMTP*ENABLE SNMP*ENABLE WSD PRINT*ENABLE IPSEC*ENABLE IP ADDRESS FILTER*ACCESS PER- MISSION ACCESS REFUSE IPv6*ENABLE AUTO SETTING LINK LOCAL GLOBAL ADDRESS GATEWAY ADDRESS NETWAREENABLE APPLETALKENABLE SPEED/DUPLEX IEEE802.1XENABLE Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 57 All factory default values are shown in bold. JOB TIME- OUTSettings5 seconds-15 seconds-300 seconds Specify the timeout interval for a print job being received. ETHER- NETTCP/IP ENABLESettingsYES/NO If YES is selected, TCP/IP is enabled. If NO is selected, TCP/IP is disabled. IP ADDRESSSetting000.000.000.000 Set the IP address for this printer on the network. Use the , , , and keys to specify the value. If the IP address is manually specified, DHCP/BOOTP is automatically set to OFF. SUBNET MASKSetting255.255.000.000 Specify the subnet mask for the network. Use the , , , and keys to specify the value. DEFAULT GATEWAYSetting000.000.000.000 Specify the IP address of the router if one is on the network. Use the , , , and keys to specify the value. DHCPSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 58 BOOTPSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. ARP/ PINGSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. HTTP ENABLESettingsYES/NO If YES is selected, HTTP is enabled. If NO is selected, HTTP is disabled. FTP ENABLESettingsYES/NO If YES is selected, FTP is enabled. If NO is selected, FTP is disabled. TELNETSettingsENABLE/DISABLE Select whether to enable or disable Tel- net transmissions. When ENABLE is selected, Telnet trans- missions are enabled. When DISABLE is selected, Telnet transmissions are disabled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 59 BON- JOURENABLESettingsYES/NO If YES is selected, BONJOUR is enabled. If NO is selected, BONJOUR is disabled. DYNAMIC DNSENABLESettingsYES/NO If YES is selected, DYNAMIC DNS is enabled. If NO is selected, DYNAMIC DNS is disabled. IPP ENABLESettingsYES/NO If YES is selected, IPP is enabled. If NO is selected, IPP is dis- abled. RAW PORTENABLESettingsYES/NO If YES is selected, RAW PORT is enabled. If NO is selected, RAW PORT is disabled. BIDI- REC- TIONALSettingsON/OFF If ON is selected, RAW PORT is enabled for bi-directional communication. If OFF is selected, RAW PORT is disabled for bi-direc- tional communication. SLP ENABLESettingsYES/NO If YES is selected, SLP is enabled. If NO is selected, SLP is dis- abled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 60 SMTP ENABLESettingsYES/NO If YES is selected, SMTP is enabled. If NO is selected, SMTP is dis- abled. SNMP ENABLESettingsYES/NO If YES is selected, SNMP is enabled. If NO is selected, SNMP is dis- abled. WSD PRINTENABLESettingsYES/NO If YES is selected, WSD PRINT is enabled. If NO is selected, WSD PRINT is disabled. IPSEC ENABLESettingsYES/NO If YES is selected, IPSEC is enabled. If NO is selected, IPSEC is disabled. IP ACCESS FILTERACCESS PER- MIS- SIONSettingsENABLE/ DISABLE If ENABLE is selected, ACCESS PERMISSION is enabled. If DISABLE is selected, ACCESS PERMISSION is disabled. ACCESS REFUSESettingsENABLE/ DISABLE If ENABLE is selected, ACCESS REFUSE is enabled. If DISABLE is selected, ACCESS REFUSE is dis- abled. Downloaded From ManualsPrinter.com Manuals