Konica Minolta magicolor 4750EN User Manual

							Configuration Menu Overview 4-38
CMYK 
DENSITYCYAN/
MAGENTA/
YELLOW/
BLACKHIGH-
LIGHT
Settings-3/-2/
-1/0/
+1/+2/
+3
The density of the 
highlight color in 
images can be 
adjusted.
MIDDLESettings-3/-2/
-1/0/
+1/+2/
+3
The density of the 
middle color in 
images can be 
adjusted.
SHADOWSettings-3/-2/
-1/0/
+1/+2/
+3
The density of the 
shadow color in 
images can be 
adjusted.
COLOR 
SEPARA-
TIONSettingsON/OFF
If ON is selected, color separation are performed. The 
contents of a color page is separated into the color pages 
for yellow, magenta, cyan and black, and each is printed 
with black gradations as individual pages. The printing order 
is yellow, magenta, cyan, then black.
If 
OFF is selected, color separation is not performed. A 
normal color separation is performed.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-39 MEMORY DIRECT
With this menu, settings for “memory direct” function can be specified.
For details on memory direct, refer to “Memory Direct” on page 5-2.
This menu item appears when an optional hard disk kit HD-P03 or a 
CompactFlash card is installed, and 
INTERFACE MENU/MEMORY 
DIRECT 
is set to ENABLE.
This menu item does not appear if public user access has not been 
permitted through authentication settings. For details on the authenti-
cation settings, refer to the Reference Guide on the Utilities and Docu-
mentation CD/DVD.
* This menu item appears when a USB memory device is plugged into 
the USB memory port.
If SYS DEFAULT MENU/SECURITY/LOCK PANEL is set to ON, the 
password must be entered in order for the contents of 
MEMORY 
DIRECT
 to be displayed.
For details on 
LOCK PANEL, refer to “SYS DEFAULT MENU” on 
page 4-49.
All factory default values are shown in bold.
LIST 
OF 
FILESSelect the file that you wish to output, and then press the Menu/
Select key.
If the file to be printed is in a folder, select the folder, and then 
press the Menu/Select key.
A maximum of 99 folders and files can be displayed.
Empty folders are not displayed.
Settings
PRINT
LIST OF FILES*
TYPE OF FILES
MEMORY DIRECT
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-40
Select this setting to output a file.
Settings
CANCEL
Select this setting to stop outputting and to return to the file list.
Letter/
A4SettingsLETTER, LEGAL, EXECUTIVE, A4, 
A5, A6, B5(JIS), B6(JIS), GOVT 
LETTER
, STATEMENT, FOLIO, SP 
FOLIO
, UK QUARTO, FOOLSCAP, 
GOVT LEGAL, 16K, PHOTO 4×6, KAI 
16
, KAI 32, ENV C6, ENV DL, ENV 
MONARCH
, ENV CHOU#3, ENV 
CHOU#4
, B5(ISO), ENV #10, 
JPOST, JPOST-D, 8 1/8×13 1/4, 8 
1/2×13 1/2, CUSTOM
Change the size of the paper.
The default setting for 120V model is 
LETTER. The default setting for all other 
models is 
A4.
Depending on the setting selected for SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
, PHOTO 4×6 may change to 
PHOTO 10×15.
This menu item does not appear if the 
selected file is PDF and XPS file.
DUPLEX:
OFF
COPIES:1SettingsOFF/LONG EDGE/SHORT EDGE
Select whether to perform duplex printing.
If 
OFF is selected, duplex printing is not performed.
If 
LONG EDGE is selected, the page will be printed 
on both sides of the paper for long edge binding.
If 
SHORT EDGE is selected, the page will be 
printed on both sides of the paper for short edge 
binding.
For magicolor 4750DN only
Settings
1-9999
Specify the number of copies to be printed (between 
1 and 9999).
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-41
COLLATESettingsON/OFF
Select whether to collate the copies.
If 
ON is selected, collated printing is performed.
If 
OFF is selected, collated printing is not performed.
This menu item appears only if the optional 
hard disk kit HD-P03 or a CompactFlash card 
is installed.
TYPE 
OF 
FILESSettingsPDF,XPS,JPEG,TIFF/PDF,XPS
Select the type of files to be displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-42
INTERFACE MENU
With this menu, interface settings can be specified.
Restart the printer after changing settings in the ETHERNET menu.
SUBNET MASK*
DEFAULT 
GATEWAY*
HTTP*
FTP*
TCP/IPENABLE
IP ADDRESS*
JOB TIMEOUT
ETHERNET
INTERFACE MENU
MEMORY 
DIRECT**
ARP/PING*
TELNET*
BONJOUR*
DYNAMIC DNS*
IPP*
DHCP*
BOOTP*
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-43
*This menu item appears when INTERFACE MENU/ETHERNET/
TCP/IP/ENABLE
 is set to YES.
** This menu item appears only if an optional hard disk kit HD-P03 or a 
CompactFlash card is installed.
*** This menu item appears when 
INTERFACE MENU/ETHERNET/
TCP/IP/RAW PORT/ENABLE
 is set to YES.
**** This menu item appears when 
INTERFACE MENU/ETHERNET/
TCP/IP/IPv6/ENABLE
 is set to YES.
SNMP*
WSD PRINT*
IPSEC*
ENABLE
ENABLE
SLP*
SMTP*
NETWARE
APPLETALK
SPEED/
DUPLEX
IP ADDRESS 
FILTER*
IEEE802.1X
IPv6*
ENABLE
RAW PORT*ENABLE
BIDIREC-
TIONAL***
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
ACCESS PER-
MISSION
ACCESS 
REFUSE
ENABLE
LINK 
LOCAL****
GLOBAL 
ADDRESS****
AUTO 
SETTING****
GATEWAY 
ADDRESS****
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-44
If SYS DEFAULT MENU/SECURITY/LOCK PANEL is set to ON, the 
password must be entered in order for the contents of 
INTERFACE 
MEMU
 to be displayed.
For details on 
LOCK PANEL, refer to “SYS DEFAULT MENU” on 
page 4-49.
All factory default values are shown in bold.
JOB 
TIME-
OUTSettings5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NETTCP/IP ENABLESettingsYES/NO
If YES is selected, TCP/IP is enabled.
If 
NO is selected, TCP/IP is disabled.
IP 
ADDRESSSetting000.000.000.000
Set the IP address for this printer on the 
network.
Use the  ,  ,  , and   keys to 
specify the value.
If the IP address is manually specified, 
DHCP, BOOTP and ARP/PING are 
automatically set to 
OFF.
SUBNET 
MASKSetting000.000.000.000
Specify the subnet mask for the network. 
Use the  ,  ,  , and   keys to 
specify the value.
DEFAULT 
GATEWAYSetting000.000.000.000
Specify the IP address of the router if 
one is on the network. Use the  ,  , 
, and   keys to specify the value.
DHCPSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-45
BOOTPSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
ARP/
PINGSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
HTTP ENABLESettingsYES/NO
If YES is selected, HTTP is 
enabled.
If 
NO is selected, HTTP is dis-
abled.
FTP ENABLESettingsYES/NO
If YES is selected, FTP is 
enabled.
If 
NO is selected, FTP is dis-
abled.
TELNETSettingsENABLE/DISABLE
Select whether to enable or disable 
Telnet transmissions.
When 
ENABLE is selected, Telnet trans-
missions are enabled.
When 
DISABLE is selected, Telnet 
transmissions are disabled.
BONJOUR ENABLESettingsYES/NO
If YES is selected, Bonjour is 
enabled.
If 
NO is selected, Bonjour is 
disabled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-46
DYNAMIC 
DNSENABLESettingsYES/NO
If YES is selected, Dynamic 
DNS is enabled.
If 
NO is selected, Dynamic 
DNS is disabled.
IPP ENABLESettingsYES/NO
If YES is selected, IPP is 
enabled.
If 
NO is selected, IPP is dis-
abled.
If HTTP/ENABLE is set 
to 
NO, IPP cannot be 
set.
RAW 
PORTENABLESettingsYES/NO
If YES is selected, Raw Port 
is enabled.
If 
NO is selected, Raw Port is 
disabled.
BIDI-
REC-
TIONALSettingsON/OFF
If ON is selected, Raw port 
transmissions are enabled.
If 
OFF is selected, Raw port 
transmissions are disabled.
SLP ENABLESettingsYES/NO
If YES is selected, SLP is 
enabled.
If 
NO is selected, SLP is dis-
abled.
SMTP ENABLESettingsYES/NO
If YES is selected, SMTP is 
enabled.
If 
NO is selected, SMTP is dis-
abled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-47
SNMP ENABLESettingsYES/NO
If YES is selected, SNMP is 
enabled.
If 
NO is selected, SNMP is 
disabled.
WSD 
PRINTENABLESettingsYES/NO
If YES is selected, WSD print 
is enabled.
If 
NO is selected, WSD print is 
disabled.
IPSEC ENABLESettingsYES/NO
If YES is selected, IPsec is 
enabled.
If 
NO is selected, IPsec is dis-
abled.
IP 
ADDRESS 
FILTERACCESS 
PER-
MIS-
SIONSettingsENABLE/
DISABLE
Select whether to enable or 
disable access granting.
If 
ENABLE is selected, 
access granting is enabled.
If 
DISABLE is selected, 
access granting is disabled.
ACCESS 
REFUSESettingsENABLE/
DISABLE
Select whether to enable or 
disable access blocking.
If 
ENABLE is selected, 
access blocking is enabled.
If 
DISABLE is selected, 
access blocking is disabled.
IPv6 ENABLESettingsYES/NO
If YES is selected, IPv6 is 
enabled.
If 
NO is selected, IPv6 is dis-
abled.
Downloaded From ManualsPrinter.com Manuals