Konica Minolta magicolor 4750EN User Manual

							Loading Media 6-22
Tray 2
Loading Plain Paper, Single Side Only and Special Paper
1Pull out Tray 2.
2Press down the media pressure 
plate to lock it into place.
3Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media6-23
4Load the paper face up in the 
tray.
Do not load above the  
mark. Up to 250 sheets 
(80 g/m2 [22 lb]) of plain 
paper can be loaded into 
the tray at one time.
5Slide the media guides against 
the edges of the paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 6-24
6Close Tray 2.
7Select PAPER MENU/PAPER SOURCE/TRAY 2/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of paper that are loaded. See also “PAPER MENU” on 
page 4-12.
Loading Label Sheets/Postcards/Thick Stock and Glossy 
Media
1Pull out Tray 2.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media6-25
2Press down the media pressure 
plate to lock it into place.
3Slide the media guides to pro-
vide more space between them.
4Load the paper face up in the 
tray.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 6-26
Up to 20 sheets can be 
loaded into the tray at 
one time.
5Slide the media guides against 
the edges of the paper.
6Close Tray 2.
7Select PAPER MENU/PAPER SOURCE/TRAY 2/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of media that is loaded. See also “PAPER MENU” on 
page 4-12.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media6-27 Tray 3 (Optional Lower Feeder Unit PF-P07)
Loading Plain Paper, Single Side Only and Special Paper
1Pull out Tray 3.
2Press down the media pressure 
plate to lock it into place.
3Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 6-28
4Load the paper face up in the 
tray.
Do not load above the  
mark. Up to 500 sheets 
(80 g/m2 [22 lb]) of plain 
paper can be loaded into 
the tray at one time.
5Slide the media guides against 
the edges of the paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media6-29
6Close Tray 3.
7Select PAPER MENU/PAPER SOURCE/TRAY 3/PAPER TYPE in 
the configuration menu, and then select the setting for the type of paper 
that is loaded. See also “PAPER MENU” on page 4-12.
Downloaded From ManualsPrinter.com Manuals 
						

							Duplexing 6-30
Duplexing
Select paper with high opacity for duplex (double-sided) printing. Opacity 
refers to how effectively paper blocks out what is written on the opposite side 
of the page. If the paper has low opacity (high translucency), then the printed 
data from one side of the page will show through to the other side. Check 
your application for margin information. For best results, print a small quantity 
to make sure the opacity is acceptable.
Note
Only plain paper, special paper and thick stock, 60–210 g/m2 (16–55.9 lb 
bond) can be autoduplexed. See “Media Specifications” on page 6-2.
Duplexing envelopes, letterhead, labels, postcards, glossy media or 
single side only papers is not supported.
How do I autoduplex?
Duplex (double-sided) printing can only be performed with the magicolor 
4750DN.
Check your application to determine how to set your margins for duplex 
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip 
at the top.
If “Long Edge” is selected, the pages will be laid out to flip 
at the side.
1
3
1
21
111
12
3
Downloaded From ManualsPrinter.com Manuals 
						

							Duplexing6-31
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is per-
formed.
The following Order settings are available when “Booklet” is selected.
1Load plain paper into the tray.
2From the printer driver, specify duplex (double-sided) printing (Layout tab 
in Windows).
3Click OK.
With autoduplexing, the back side is printed first, and then the front 
side is printed.If “Left Binding” is selected, the pages can be folded as a 
left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a 
right-bound booklet.
1
12
3
3
3
1 12
Downloaded From ManualsPrinter.com Manuals