Konica Minolta magicolor 4650DN User Manual

							Configuration Menu Overview 67
RGB 
SOURCESettingsDEVICE COLOR/sRGB
Specify the color space for RGB image data.
If 
DEVICE COLOR is selected, no color space is 
specified.
RGB 
INTENTSettingsVIVID/PHOTOGRAPHIC
Specify the characteristic applied when converting 
RGB image data to CMYK data.
If 
VIVID is selected, a vivid output is produced.
If 
PHOTOGRAPHIC is selected, a brighter output is 
produced.
RGB GRAYSettingsCOMPOSITE BLACK/BLACK AND 
GRAY/BLACK ONLY
Specify how black and grays are reproduced in 
RGB image data.
If 
COMPOSITE BLACK is selected, black is 
reproduced using the CMYK colors.
If 
BLACK AND GRAY is selected, black and gray 
are reproduced using black only.
If 
BLACK ONLY is selected, black is reproduced 
using only black.
HALFTONESettingsLINE ART/DETAIL/SMOOTH
Select how halftones are reproduced.
If 
LINE ART is selected, halftones are reproduced 
with high precision.
If 
DETAIL is selected, halftones are reproduced 
with detail.
If 
SMOOTH is selected, halftones are reproduced 
with smoothness.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 68
INTERFACE MENU
With this menu, interface settings can be specified.
Restart the printer after changing settings in the ETHERNET menu.
SUBNET MASK*
DEFAULT 
GATEWAY*
HTTP*
FTP*
TCP/IPENABLE
IP ADDRESS*
JOB TIMEOUT
ETHERNET
INTERFACE MENU
MEMORY 
DIRECT**
ARP/PING*
CAMERA 
DIRECT
TELNET*
BONJOUR*
DYNAMIC DNS*
IPP*
DHCP*
BOOTP*
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 69


*This menu item appears when INTERFACE MENU/ETHERNET/
TCP/IP/ENABLE
 is set to YES.
** This menu item appears only if an optional hard disk kit or a Com-
pactFlash card is installed.
SNMP*
WSD PRINT*
IPSEC*
ENABLE
ENABLE
SLP*
SMTP*
NETWARE
APPLETALK
SPEED/
DUPLEX
IP ADDRESS 
FILTER*
IEEE802.1X
IPv6*
ENABLE
RAW PORT*ENABLE
BIDIREC-
TIONAL
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
ACCESS PER-
MISSION
ACCESS 
REFUSE
ENABLE
LINK LOKAL
GLOBAL 
ADDRESS
AUTO 
SETTING
GATEWAY 
ADDRESS
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 70
All factory default values are shown in bold.
JOB 
TIME-
OUTSettings5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NETTCP/IP ENABLESettingsYES/NO
If YES is selected, TCP/IP is enabled.
If 
NO is selected, TCP/IP is disabled.
IP 
ADDRESSSetting000.000.000.000
Set the IP address for this printer on the 
network.
Use the  ,  ,  , and   keys to 
specify the value.
If the IP address is manually specified, 
DHCP/BOOTP is automatically set to 
OFF.
SUBNET 
MASKSetting255.255.000.000
Specify the subnet mask for the network. 
Use the  ,  ,  , and   keys to 
specify the value.
DEFAULT 
GATEWAYSetting000.000.000.000
Specify the IP address of the router if 
one is on the network. Use the  ,  , 
, and   keys to specify the value.
DHCPSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 71
BOOTPSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
ARP/
PINGSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
HTTP ENABLESettingsYES/NO
If YES is selected, HTTP is 
enabled.
If 
NO is selected, HTTP is dis-
abled.
FTP ENABLESettingsYES/NO
If YES is selected, FTP is 
enabled.
If 
NO is selected, FTP is dis-
abled.
TELNETSettingsENABLE/DISABLE
Select whether to enable or disable 
Telnet transmissions.
When 
ENABLE is selected, Telnet trans-
missions are enabled.
When 
DISABLE is selected, Telnet 
transmissions are disabled.
BONJOUR ENABLESettingsYES/NO
If YES is selected, Bonjour is 
enabled.
If 
NO is selected, Bonjour is 
disabled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 72
DYNAMIC 
DNSENABLESettingsYES/NO
If YES is selected, Dynamic 
DNS is enabled.
If 
NO is selected, Dynamic 
DNS is disabled.
IPP ENABLESettingsYES/NO
If YES is selected, IPP is 
enabled.
If 
NO is selected, IPP is dis-
abled.
RAW 
PORTENABLESettingsYES/NO
If YES is selected, Raw Port 
is enabled.
If 
NO is selected, Raw Port is 
disabled.
BIDI-
REC-
TIONALSettingsON/OFF
If ON is selected, Raw port 
transmissions are enabled.
If 
OFF is selected, Raw port 
transmissions are disabled.
SLP ENABLESettingsYES/NO
If YES is selected, SLP is 
enabled.
If 
NO is selected, SLP is dis-
abled.
SMTP ENABLESettingsYES/NO
If YES is selected, SMTP is 
enabled.
If 
NO is selected, SMTP is dis-
abled.
SNMP ENABLESettingsYES/NO
If YES is selected, SNMP is 
enabled.
If 
NO is selected, SNMP is 
disabled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 73
WSD 
PRINTENABLESettingsYES/NO
If YES is selected, WSD print 
is enabled.
If 
NO is selected, WSD print is 
disabled.
IPSEC ENABLESettingsYES/NO
If YES is selected, IPsec is 
enabled.
If 
NO is selected, IPsec is dis-
abled.
IP 
ADDRESS 
FILTERACCESS 
PER-
MIS-
SIONSettingsENABLE/
DISABLED
Select whether to enable or 
disable access granting.
If 
ENABLE is selected, 
access granting is enabled.
If 
DISABLE is selected, 
access granting is disabled.
ACCESS 
REFUSESettingsENABLE/
DISABLED
Select whether to enable or 
disable access blocking.
If 
ENABLE is selected, 
access blocking is enabled.
If 
DISABLE is selected, 
access blocking is disabled.
IPv6 ENABLESettingsYES/NO
If YES is selected, IPv6 is 
enabled.
If 
NO is selected, IPv6 is dis-
abled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 74
AUTO 
SET-
TINGSettingsYES/NO
If YES is selected, auto 
configuration of IPv6 is 
enabled.
If 
NO is selected, auto config-
uration of IPv6 is disabled.
LINK 
LOKALDisplays the Link-Local 
address.
GLOBAL
ADDRESSDisplays the global address.
GATE-
WAY 
ADDRESSDisplays the gateway 
address.
NETWARE ENABLESettingsYES/NO
If YES is selected, NetWare is enabled.
If 
NO is selected, NetWare is disabled.
APPLE
TALKENABLESettingsYES/NO
If YES is selected, AppleTalk is enabled.
If 
NO is selected, AppleTalk is disabled.
SPEED/
DUPLEXSettingsAUTO/10BASE FULL/10BASE 
HALF/100BASE FULL/100BASE 
HALF/1000BASE FULL
Specify the transmission speed for the network and 
the transmission method for bi-directional 
transmission.
IEEE 
802.1XENABLESettingsYES/NO
If YES is selected, IEEE 802.1X is 
enabled.
If 
NO is selected, IEEE 802.1X is dis-
abled.
MEMORY 
DIRECTSettingsENABLE/DISABLE
Select whether to enable or disable memory direct printing.
If 
ENABLE is selected, memory direct printing is enabled.
If 
DISABLE is selected, memory direct printing is disabled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 75
CAMERA 
DIRECTSettingsENABLE/DISABLE
Select whether to enable or disable camera direct printing.
If 
ENABLE is selected, camera direct printing is enabled.
If 
DISABLE is selected, camera direct printing is disabled.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 76
SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer, 
such as the display language of the message window and the time until the 
machine enters Energy Saver mode.
LANGUAGE
EMULATIONDEF.
EMULATION
POSTSCRIPTWAIT 
TIMEOUT
PS ERROR 
PAGE
PS PROTOCOL
PCLCR/LF 
MAPPING
LINES PER 
PAGE
FONT SOURCEFONT NUMBER
PITCH SIZE
(POINT SIZE)
SYMBOL SET
PAPERDEFAULT 
PAPER
UNIT OF 
MEASURE
SYS DEFAULT MENU
PAPER SIZE
CUSTOM SIZE
PAPER TYPE
GRAYSCALE 
PAGE
DO STARTUP 
PAGESTARTUP 
OPTIONS
AUTO 
CONTINUE
DIGITAL
SIGNATURE
XPS ERROR
PAGE
XPS*****
Downloaded From ManualsPrinter.com Manuals