Konica Minolta magicolor 4650DN User Manual

							Loading Media 117
4Load the paper face up in the 
tray.
Do not load above the 
 
mark. Up to 250 sheets 
(80 g/m
2 [22 lb]) of plain 
paper can be loaded into 
the tray at one time.
5Slide the media guides against 
the edges of the paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 118
6Close Tray 2.
7Select PAPER MENU/PAPER SOURCE/TRAY 2/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of paper that are loaded. See also “PAPER MENU” on 
page 37.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 119 Tray 3 (Optional Lower Feeder Unit)
Loading Plain Paper
1Pull out Tray 3.
2Press down the media pressure 
plate to lock it into place.
3Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 120
4Load the paper face up in the 
tray.
Do not load above the 
 
mark. Up to 500 sheets 
(80 g/m
2 [22 lb]) of plain 
paper can be loaded into 
the tray at one time.
5Slide the media guides against 
the edges of the paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 121
6Close Tray 3.
7Select PAPER MENU/PAPER SOURCE/TRAY 3/PAPER TYPE in 
the configuration menu, and then select the setting for the type of paper 
that is loaded. See also “PAPER MENU” on page 37.
Downloaded From ManualsPrinter.com Manuals 
						

							Duplexing 122
Duplexing
Duplex (double-sided) printing can be done with magicolor 4650DN, which 
has the duplex unit built in as a standard. If the paper has low opacity (high 
translucency), then the printed data from one side of the page will show 
through to the other side. Check your application for margin information. For 
best results, print a small quantity to make sure the opacity is acceptable.
Note
Only plain paper, 60–90 g/m2 (16–24 lb bond) can be autoduplexed. See 
“Media Specifications” on page 100.
Duplexing envelopes, labels, postcards, thick stock, glossy media or 
transparencies is not supported.
How do I autoduplex?
Duplex (double-sided) printing can only be performed with the magicolor 
4650DN.
Check your application to determine how to set your margins for duplex 
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip 
at the top.
If “Long Edge” is selected, the pages will be laid out to flip 
at the side.
1
3
1
21
111
12
3
Downloaded From ManualsPrinter.com Manuals 
						

							Duplexing 123
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is per-
formed.
The following Order settings are available when “Booklet” is selected.
1Load plain paper into the tray.
2From the printer driver, specify duplex (double-sided) printing (Layout tab 
in Windows).
3Click OK.
With autoduplexing, the back side is printed first, and then the front 
side is printed.If “Left Binding” is selected, the pages can be folded as a 
left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a 
right-bound booklet.
1
12
3
3
3
1 12
Downloaded From ManualsPrinter.com Manuals 
						

							Output Tray 124
Output Tray
All printed media is output to the face-down output tray on top of the printer. 
This tray has a capacity of approximately 200 sheets (A4/Letter) of 80 g/m2 
(22 lb) paper. 
If the media is stacked too high in the output tray, your printer may 
experience media misfeeds, excessive media curl, or static buildup. 
Remove transparencies as soon as possible from the output tray to 
avoid static buildup
If the paper curls and falls 
out of the output tray when 
printing thick paper, fold 
down the tray extension and 
pull out the paper stopper 
before printing.
Downloaded From ManualsPrinter.com Manuals 
						

							Media Storage 125
Media Storage
How do I store media?
„Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up 
too much and cause misfeeding.
„If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
„Avoid moisture, excessive humidity, direct sunlight, excessive heat 
(above 
35°C [95°F]), and dust.
„Avoid leaning media against other objects or placing it in an upright posi-
tion.
Before using stored media, do a trial print to check print quality. 
Downloaded From ManualsPrinter.com Manuals 
						

							Media Storage 126
Downloaded From ManualsPrinter.com Manuals