Konica Minolta magicolor 4650DN User Manual

							Configuration Menu Overview 77
LCD 
CONTRAST
SECURITYCHANGE 
PASSWORD
LOCK PANEL
CLOCKDATE 
(xx.xx.xx)
TIME
HDD FORMAT*USER AREA 
ONLY
ALL
RESTORE 
DEFAULTSRESTORE 
NETWORK
RESTORE 
PRINTER
RESTORE ALL
ENERGY 
SAVER TIME**
MENU 
TIMEOUT
ENERGY 
SAVER
TIME ZONE
HOLD JOB 
TIMEOUT*
CARD FOR-
MAT***USER AREA 
ONLY
ALL
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 78
* These menu items appear only if an optional hard disk kit is installed.
** This menu item appears when you select 
ON from the ENERGY 
SAVER
 menu.
*** This menu item appears only if an optional CompactFlash card is 
installed.
**** This menu item appears only if the optional lower feeder unit is 
installed.
***** This menu item appears only if an optional hard disk kit or a 
CompactFlash card is installed.
ENABLE 
WARNINGPAPER EMPTYTRAY1
TRAY2
TRAY3****
TONER LOW
I-UNIT LOW
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 79
All factory default values are shown in bold.
LAN-
GUAGESettingsENGLISH/FRENCH/GERMAN/SPANISH/
ITALIAN/PORTUGUESE/CZECH/JAPANESE/
KOREAN/SIMPLIFIED CHINESE/
TRADITIONAL CHINESE/DUTCH/RUSSIAN/
POLISH
The display language of the message window can be changed 
to the selected language.
The language selections appear in the message window in the 
corresponding language. For example, 
GERMAN appears as 
DEUTSCH.
EMULA-
TIONDEF. 
EMULA-
TIONSettingsAUTO/POSTSCRIPT/PCL
Specify the printer emulation language.
If 
AUTO is selected, the printer automatically selects 
the printer emulation language from the data stream.
POST-
SCRIPTWAIT 
TIME
OUTSettings0-300
Specify the time until an error is 
determined to be a PostScript error.
If 
0 is selected, no timeout is performed.
PS 
ERROR 
PAGESettingsON/OFF
Select whether or not an error page is 
printed when a Postscript error occurs.
PS 
PROTO-
COLSettingsAUTO/NORMAL/BINARY
Specify the protocol for data transmissions 
with a PostScript data stream.
If 
AUTO is selected, the printer 
automatically selects an applicable 
protocol from the data stream.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 80
PCL CR/LF 
MAP-
PINGSettingsCR=CR LF=LF/CR=CRLF 
LF=LF/CR=CR 
LF=LFCR/CR=CRLF 
LF=LFCR
Select the definitions of the CR/LF codes 
in the PCL language.
LINES 
PER 
PAGESettings5-60-128
Specify the number of lines per page in the 
PCL language.
FONT 
SOURCEFONT 
NUMBERSettings0-102
Specify the default font in the 
PCL language.
The font numbers that appear 
correspond to the PCL font list. 
For details on printing the font 
list, refer to “PRINT MENU” on 
page 35.
PITCH 
SIZE
(POINT 
SIZE)Settings0.44-10.00-
99.99
(4.00-12.00-
999.75)
Specify the font size in the PCL 
language.
If the selected 
FONT NUMBER 
is for a bitmap font, 
PITCH 
SIZE
 appears. If the selected 
FONT NUMBER is for an 
outline font, 
POINT SIZE 
appears.
SYMBOL 
SETSpecify the symbol set used 
with the PCL language.
The default setting is 
PC8.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 81
XPS DIGTAL
SIGNA-
TURESettingsENABLE/DISABLE
Select whether to enable or disable XPS 
digital signatures.
If 
ENABLE is selected, XPS digital 
signatures are enabled.
If 
DISABLE is selected, XPS digital 
signatures are disabled.
XPS 
ERROR 
PAGESettingsON/OFF
Select whether or not an error report is 
printed after an XPS error has occurred.
If 
ON is selected, the error report is printed.
If 
OFF is selected, the error report is not 
printed.
PAPER DEFAULT 
PAPERPAPER 
SIZESettingsLETTER/LEGAL/EXECU-
TIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT 
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK 
QUARTO/FOOLSCAP/GOVT 
LEGAL/16K/PHOTO 4x6/
KAI 16/KAI 32/ENV C6/
ENV DL/ENV MONARCH/
ENV CHOU#3/ENV 
CHOU#4/B5(ISO)/ENV 
#10/JPOST/JPOST-D/
CUSTOM
Select the size of media that is normally 
used.
The default setting for North 
America is 
LETTER. The default 
setting for all other regions is 
A4.
Depending on the setting selected 
for 
SYS DEFAULT MENU/
PAPER/UNIT OF MEASURE
, 
PHOTO 4×6 may change to 
PHOTO 10×15.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 82
CUSTOM 
SIZESpecify the media size when PAPER 
SIZE
 is set to CUSTOM.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 92 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.63 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.26 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to 356 mm
(default)
–North America: 279 mm
–All other regions: 297 mm
„For INCHES: 5.83 to 
14.00 inches
(default)
–North America: 11.00 inches
–All other regions: 11.69 inches
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 83
PAPER 
TYPESettingsPLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the type of media that is normally 
used.
UNIT 
OF 
MEA-
SURESettingsINCHES/MILLIMETERS
The units for specifying the size of custom media can 
be switched between inches and millimeters.
The default setting for North America is 
INCHES. The default setting for all other 
regions is 
MILLIMETERS.
GRAY 
SCALE 
PAGESettingsAUTO/GRAYSCALE PRINT/COLOR PRINT
Specify the operation to be performed for black-and-white 
pages in a job specified for color printing.
If 
AUTO is selected, printing is automatically performed accord-
ing to the first page of the job.
If 
GRAYSCALE PRINT is selected, black-and-white printing is 
automatically performed depending on each page.
If 
COLOR PRINT is selected, color printing is performed, even 
for a black-and-white page.
STARTUP 
OPTIONSDO 
START-
UP 
PAGESettingsON/OFF
Select whether or not a startup page is printed when 
the printer is turned on.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 84
AUTO 
CON-
TINUESettingsON/OFF
Select whether or not printing continues if the size or type of 
media in the selected tray is different from the size or type of 
media for the print job.
If 
AUTO CONTINUE is set to ON, printing automatically contin-
ues after about 10 seconds under the following conditions. At 
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (Page 212)/TRAY EMPTY (Page 
214)
Different media size/type: PAPER ERROR (Page 212)/TRAY x 
PAPER ERR (Page 214)
HOLD 
JOB 
TIME
OUTSettingsDISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk 
are deleted. If 
DISABLE is selected, print jobs are not deleted 
at a specific time.
ENERGY 
SAVERSettingsON/OFF
If ON is selected, the machine enters Energy Saver mode 
according to the length of time specified for 
ENERGY SAVER 
TIME
.
If 
OFF is selected, the machine will not enter Energy Saver 
mode.
ENERGY 
SAVER 
TIMESettings5 minutes/6 minutes/7 minutes/8 
minutes/9 minutes/10 minutes/11 
minutes/12 minutes/13 minutes/14 
minutes/15 minutes/30 minutes/
1 hour/3 hours
Specify the length of time until the machine enters Energy 
Saver mode.
This menu item appears only when 
ENERGY SAVER is set to 
ON.
MENU 
TIME
OUTSettingsOFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed 
when no operation is performed while a menu or help screen is 
displayed in the message window. If 
OFF is selected, no 
timeout occurs.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 85
LCD 
CON-
TRASTSettings-3/-2/-1/0/+1/+2/+3
Adjust the contrast of the message window.
The darkest level setting is 
-3 and the brightest level setting is 
+3.
SECU-
RITYCHANGE 
PASS-
WORDSpecify the password for locking the control panel.
If the password is set to 
0000 (default), the control 
panel is not locked. In order to lock the control panel, 
be sure to specify a password other than 
0000.
LOCK 
PANELSettingsOFF/MINIMUM/ON
Specify how the control panel is locked.
If 
OFF is selected, the control panel is not locked.
If 
MINIMUM is selected, the INTERFACE MENU 
and SYS DEFAULT MENU are protected with a 
password.
If 
ON is selected, all menus are protected with a 
password.
In order to lock the control panel, be sure to specify a 
password other than 
0000.
CLOCK DATE
(xx.xx.
xx)
Specify the date for the printer’s internal clock.
The date for Asia and China is set in the order year, 
month, then day (
YY.MM.DD).
The date for the Americas is set in the order month, 
day, then year (
MM.DD.YY).
The date for Europe is set in the order day, month, 
then year (
DD.MM.YY).
TIMESpecify the time for the printer’s internal clock.
TIME 
ZONESettings-12:00-00:00-+13:00
Specify the time zone.
HDD 
FORMATUSER 
AREA 
ONLYInitialize the user area of the hard disk. When this 
menu item is selected, the printer is automatically 
restarted.
ALLInitialize the hard disk. When this menu item is 
selected, the printer is automatically restarted.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 86
CARD 
FORMATUSER 
AREA 
ONLYInitialize the user area of the compactflash card. 
When this menu item is selected, the printer is 
automatically restarted.
ALLInitialize the compactflash card. When this menu item 
is selected, the printer is automatically restarted.
RESTORE 
DEFAULTSRESTORE 
NETWORKReset the network settings to their defaults. When 
this menu item is selected, the printer is 
automatically restarted.
RESTORE 
PRINTERReset the printer settings to their defaults. When this 
menu item is selected, the printer is automatically 
restarted.
RESTORE 
ALLReset all settings to their defaults. When this menu 
item is selected, the printer is automatically restarted.
ENABLE 
WARNINGPAPER 
EMPTYTRAY1SettingsON/OFF
Select whether or not a warning appears 
when Tray 1 runs out of media.
TRAY2SettingsON/OFF
Select whether or not a warning appears 
when Tray 2 runs out of media.
TRAY3SettingsON/OFF
Select whether or not a warning appears 
when Tray 3 runs out of media.
TONER 
LOWSettingsON/OFF
Select whether or not a warning appears when the 
toner is about to run out.
I-UNIT 
LOWSettingsON/OFF
Select whether or not a warning appears when the 
imaging unit is about to reach the end of its life.
Downloaded From ManualsPrinter.com Manuals