Konica Minolta magicolor 2590MF User Manual

Configuration Menu Overview 27 MACHINE SETTING Menu
Manufacturer’s default settings appear in bold.
1 AUTO PANEL RESETSettingON / OFF
Select whether or not all settings in the control 
panel return to their default settings when no 
operation is performed for a set length of time.
If 
ON is selected, select from 0.5, 1, 2, 3, 4, 
and 
5 (units: minutes; default: 1) for the length 
of time until the auto panel reset operation is 
performed.
If 
OFF is selected, the auto panel reset opera-
tion is not...

Configuration Menu Overview 28
6 BUZZER VOLUMESettingHIGH / LOW / OFF
Select the volume of the sound produced when 
a key is pressed and of the alarm that is 
sounded when an error occurs.
7 INITIAL MODESettingCOPY / FAX
Specify the default mode when the machine is 
turned on or when all settings in the control 
panel return to their default settings.
8 TONER EMPTY STOPSettingON / ON(FAX) / OFF
Select whether or not printing, copying and fax-
ing stop when the toner has run out.
If 
ON is selected,...

Configuration Menu Overview 29 PAPER SOURCE SETUP Menu
Manufacturer’s default settings appear in bold.
1 TRAY1 PAPERMedia typePLAIN PAPER / TRANSPARENCY / 
LABELS / LETTERHEAD / ENVELOPE 
/ 
POSTCARD / THICK STOCK / 
GLOSSY
Media size
When a setting other than ENVELOPE 
or 
POSTCARD is selected: A4 / B5 / A5 
/ 
LEGAL / LETTER / G LETTER / 
STATEMENT / EXECUTIVE / FOLIO / 
OFICIO (Mexico only)
(If 
TRANSPARENCY, LABELS, THICK 
STOCK or GLOSSY is selected, LEGAL 
and 
FOLIO are not displayed.)
When...

Configuration Menu Overview 30
COPY SETTING Menu
Manufacturer’s default settings appear in bold.
Settings for 1 MODE and 5 QUALITY can also be specified using 
the Quality key. 
Press the Quality key once to display the setting for 
1 MODE. 
Press the Quality key twice to display the setting for 
5 QUALITY.
Settings for 3 DENSITY LEVEL(M) can also be specified using 
the Light/Dark key.
Settings for 4 COLLATE can also be specified using the Collate key.
Settings for 6 PAPER PRIORITY can also be...

Configuration Menu Overview 31 FAX REGISTRATION Menu
TX SETTING Menu
1 ONE-TOUCH DIALRegister fax destinations for one-touch dialing, 
speed dialing, and group dialing.
For details, refer to the magicolor 2590MF Facsim-
ile User’s Guide.
2 SPEED DIAL
3 GROUP DIAL
1 SCAN DENSITY
Specify settings for sending faxes.
For details, refer to the magicolor 2590MF Facsim-
ile User’s Guide.
2 RESOLUTION
3 HEADER
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 32
RX SETTING Menu
COMM. SETTING Menu
REPORTING Menu
1 MEMORY RX MODESpecify settings for receiving faxes.
For details, refer to the magicolor 2590MF Facsim-
ile User’s Guide.
2 NO. of RINGS
3 REDUCTION RX
4 RX PRINT
5 RX MODE
6 FOOTER
7 SELECT TRAY
1 TEL LINE TYPE
Specify the connection settings for faxing.
For details, refer to the magicolor 2590MF Facsim-
ile User’s Guide.
2 LINE MONITOR
3 PSTN/PBX
1 ACTIVITY 
REPORT
Specify the settings for printing the fax report.
For...

Configuration Menu Overview 33 USER SETTING Menu
Manufacturer’s default settings appear in bold.
1 FAX PTT SET-
TINGSelect the country where this machine is installed. 
For details, refer to the magicolor 2590MF Facsim-
ile User’s Guide.
If the country is changed, settings for other 
functions may also be changed.
2 DATE&TIMESpecify the date and time.
Specify the time in the 24-hour format.
Use the keypad to specify the settings.
For details, refer to the magicolor 2590MF Facsim-
ile User’s Guide.
3...

Configuration Menu Overview 34
DIRECT PRINT Menu
Manufacturer’s default settings appear in bold.
Camera settings may be given priority, depending on the settings 
specified on this machine.
* If Tray 2 is not installed, 
TRAY2 does not appear.
1 IMAGE 
QUALITYSettingDRAFT / NORMAL / FINE
Select the resolution for Camera Direct Photo Printing.
DRAFT = 600 dpi × 600 dpi; NORMAL = 1200 dpi × 
600 dpi; 
FINE = 2400 dpi × 600 dpi
2 PAPER SIZETrayTRAY1 / TRAY2*
Media type
If TRAY1 is selected, select the...

Configuration Menu Overview 35 NETWORK SETTING Menu
Manufacturer’s default settings appear in bold.
To edit or erase entered characters, press the Cancel/C key. To can-
cel a setting, hold down the Cancel/C key until, erase all characters, 
and then press the Cancel/C key again.
1 IP ADDRESSSettingAUTO / SPECIFY
Select whether to automatically retrieve the IP address 
or to specify a fixed IP address. Consult your network 
administrator for information about the IP address to 
use.
2 SUBNET MASKEnter...

Configuration Menu Overview 36
E-MAIL SETTING Menu
Manufacturer’s default settings appear in bold.
To edit or erase entered characters, press the Cancel/C key. To can-
cel a setting, hold down the Cancel/C key until, erase all characters, 
and then press the Cancel/C key again.
1 SENDER NAMEEnter your name as the sender’s name. A maximum of 
20 characters can be entered. The default sender 
name is “magicolor 2590MF ”.
2 E-MAIL 
ADDRESSType in the E-mail address of the E-mail sender when 
using network...