Konica Minolta magicolor 1690MF User Manual

Status, Error, and Service Messages 9-40
CHECK TRAY1 PAPER
LOAD PAPER (
1xx)
(PRESS START KEY)
Tray1 has run out of 
paper.Load media into the 
tray, and then press 
the Start key.
Media has misfed in 
Tray 1.Remove the misfed 
media.
Check Print Mode=*A printer error 
occurred during 
printing.Press the * key to 
check the error, then 
take the appropriate 
measures.
COMMUNICATION ERROR
USB MemoryWhile data was 
being sent in Scan 
mode, the connec-
tion to the USB 
memory device was 
interrupted.Check...

Status, Error, and Service Messages9-41
I/C ENDThe time to replace 
the imaging car-
tridge has been 
reached.Replace the imaging 
cartridge.
Printing can 
continue, 
however, the 
printing result 
are not 
guaranteed. If 
printing is 
continued, the 
message “I/C 
LIFE END / 
REPLACE I/C” 
appears and 
printing stops.
I/C LIFE END
REPLACE I/CThe time to replace 
the imaging car-
tridge has been 
reached.Replace the imaging 
cartridge.
I/C LowThe imaging  car-
tridge is nearly 
empty.Prepare the imaging...

Status, Error, and Service Messages 9-42
MEMORY FILE FULLThe maximum num-
ber of image data 
files has been 
reached.Turn the machine off, 
and then, after a few 
seconds, turn it on 
again. Decrease the 
amount of data to be 
printed (for example, 
by decreasing the res-
olution), and then try 
printing again.
MEMORY FULLThe machine has 
received more data 
than can be pro-
cessed with its inter-
nal memory.Turn the machine off, 
and then, after a few 
seconds, turn it on 
again. Decrease the 
amount of...

Status, Error, and Service Messages9-43
NOT E-MAIL ADDRESSWhen the destina-
tion for the scan 
data was specified, 
a fax number regis-
tered in the favorite 
list or as a speed 
dial destination or 
group dial destina-
tion has been 
selected.Directly type in the 
destination for the scan 
data, or specify an 
e-mail address regis-
tered in the favorite list 
or as a speed dial des-
tination or group dial 
destination.
When sending scan 
data to an FTP 
address or SMB 
address, only one 
address can be...

Status, Error, and Service Messages 9-44
PAPER SIZE ERROR
RESET PAPER (xxx)The size of paper 
being printed on is 
different from the 
size of paper speci-
fied in the printer 
driver.Press the Start key to 
cancel the caution.
To print on paper of the 
size specified in the 
printer driver, load 
paper of the correct 
size into the specified 
tray, and then try per-
forming the print job 
again. 
PC CONNECTION FAILEDWhile data was 
being sent in Scan 
mode, the connec-
tion to the computer 
was...

Status, Error, and Service Messages9-45
SERVER MEMORY FULL
SMTP ServerThe memory of the 
SMTP server has 
become full.Free up some space 
on the disk, for exam-
ple, by contacting your 
server administrator.
THE PARTY IS FULLThe maximum num-
ber of 236 destina-
tions for the scan 
data has been 
reached.Send the data, and 
then try scanning 
again. Otherwise, 
delete unnecessary 
destinations before 
adding the desired 
ones.
TONER LIFE END
CHANGE x TONERThe indicated toner 
cartridge has 
become...

Status, Error, and Service Messages 9-46
Toner Out xThe indicated toner 
cartridge has 
become empty. 
(This message 
appears if TONER 
OUT STOP on the 
MACHINE SET-
TING menu is set to 
OFF.)Replace the indicated 
toner cartridges.
Printing can 
continue, 
however, the 
printing result 
are not 
guaranteed. If 
printing is 
continued, the 
message 
“TONER LIFE 
END / CHANGE 
X TONER” 
appears and 
printing stops.
Toner Low xThe indicated toner 
cartridge is nearly 
empty.Prepare the indicated 
toner...

Status, Error, and Service Messages9-47
Video I/F ErrorA video interface 
error occurred in the 
machine.Turn off the machine. 
After a few seconds, 
turn on the machine.
WRONG PASSWORD
xxx ServerThe password is 
incorrect, so the 
indicated server 
could not be 
accessed.Check the password, 
and then specify the 
correct one.
Wrong Toner xAn unapproved 
toner cartridge is 
installed.Install a correct KON-
ICA MINOLTA toner 
cartridge.
xxx COVER OPEN
CLOSE xxx COVERThe indicated cover 
is open.Close the...

Status, Error, and Service Messages 9-48
Service Messages
These messages indicate a more serious fault that can only be corrected by a 
customer service engineer. If one of these messages appears, turn the 
machine off, then turn it on again. If the problem persists, contact your local 
vendor or authorized service provider.
This service message... means... Do this...
MACHINE TROUBLE
SERVICE CALL (xxxx)An error has been 
detected with the item 
indicated “
xxxx” in 
the service message.Reboot the...

10
10Installing
Accessories
Downloaded From ManualsPrinter.com Manuals