Konica Minolta bizhub C35P User Manual

Clearing Media Misfeeds 9-16
If the misfed media cannot 
be removed by pulling it 
down, pull it from the top of 
the fuser unit.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-17
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
Downloaded From...

Clearing Media Misfeeds 9-18
6Close the fuser unit cover.
7Push down the 2 levers.
8Close the eject cover. 
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-19
9Close the right side cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 9-20
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray) 
and Transfer Roller
1Pull the lever, and then open the 
right side cover.
Before opening the right 
side cover, fold up Tray 1.
2Carefully pull out the misfed 
media.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-21
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
Downloaded From...

Clearing Media Misfeeds 9-22
3Close the right side cover.
Downloaded From ManualsPrinter.com Manuals 

Solving Problems with Media Misfeeds9-23
Solving Problems with Media Misfeeds
Frequent misfeeds in any area indicate that area should be checked, 
repaired, or cleaned. Repeated misfeeds may also happen if you’re 
using unsupported print media.
Symptom Cause Solution
Several 
sheets go 
through the 
printer 
together.The front edges of 
the media are not 
even.Remove the media and even up the 
front edges, then reload it.
The media is moist 
from humidity.Remove the moist media and replace it 
with new,...

Solving Problems with Media Misfeeds 9-24
Media is 
misfeeding.The media is not cor-
rectly positioned in 
the tray.Remove the misfed media and reposi-
tion the media properly in the tray.
The number of sheets 
in the tray exceeds 
the maximum 
allowed.Remove the excess media and reload 
the correct number of sheets in the 
tray. 
The media guides are 
not correctly adjusted 
to the media size.Adjust the media guides in the tray to 
match the size of the media.
Warped or wrinkled 
media is loaded in the...

Solving Other Problems9-25
Solving Other Problems
Symptom Cause Solution
Printer 
power is not 
on.The power cord is not 
correctly plugged into 
the outlet.Turn off the printer, confirm that the 
power cord is correctly plugged into the 
outlet, and then turn on the printer.
Something is wrong 
with the outlet con-
nected to the printer.Plug another electrical appliance into 
the outlet and see whether it operates 
properly.
The power switch is 
not correctly turned 
on (I position).Turn the power...