Konica Minolta bizhub C20P User Manual
Have a look at the manual Konica Minolta bizhub C20P User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Configuration Menu Overview 67 RGB SOURCESettingsDEVICE COLOR/sRGB Specify the color space for RGB image data. If DEVICE COLOR is selected, no color space is specified. RGB INTENTSettingsVIVID/PHOTOGRAPHIC Specify the characteristic applied when converting RGB image data to CMYK data. If VIVID is selected, a vivid output is produced. If PHOTOGRAPHIC is selected, a brighter output is produced. RGB GRAYSettingsCOMPOSITE BLACK/BLACK AND GRAY/BLACK ONLY Specify how black and grays are reproduced in RGB image data. If COMPOSITE BLACK is selected, black is reproduced using the CMYK colors. If BLACK AND GRAY is selected, black and gray are reproduced using black only. If BLACK ONLY is selected, black is reproduced using only black. HALFTONESettingsLINE ART/DETAIL/SMOOTH Select how halftones are reproduced. If LINE ART is selected, halftones are reproduced with high precision. If DETAIL is selected, halftones are reproduced with detail. If SMOOTH is selected, halftones are reproduced with smoothness. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 68 INTERFACE MENU With this menu, interface settings can be specified. Restart the printer after changing settings in the ETHERNET menu. SUBNET MASK* DEFAULT GATEWAY* HTTP* FTP* TCP/IPENABLE IP ADDRESS* JOB TIMEOUT ETHERNET INTERFACE MENU MEMORY DIRECT** ARP/PING* CAMERA DIRECT TELNET* BONJOUR* DYNAMIC DNS* IPP* DHCP* BOOTP* ENABLE ENABLE ENABLE ENABLE ENABLE Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 69 *This menu item appears when INTERFACE MENU/ETHERNET/ TCP/IP/ENABLE is set to YES. ** This menu item appears only if an optional hard disk kit or a Com- pactFlash card is installed. SNMP* WSD PRINT* IPSEC* ENABLE ENABLE SLP* SMTP* NETWARE APPLETALK SPEED/ DUPLEX IP ADDRESS FILTER* IEEE802.1X IPv6* ENABLE RAW PORT*ENABLE BIDIREC- TIONAL ENABLE ENABLE ENABLE ENABLE ENABLE ACCESS PER- MISSION ACCESS REFUSE ENABLE LINK LOKAL GLOBAL ADDRESS AUTO SETTING GATEWAY ADDRESS Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 70 All factory default values are shown in bold. JOB TIME- OUTSettings5 seconds- 15 seconds-300 seconds Specify the timeout interval for a print job being received. ETHER- NETTCP/IP ENABLESettingsYES /NO If YES is selected, TCP/IP is enabled. If NO is selected, TCP/IP is disabled. IP ADDRESSSetting000.000.000.000 Set the IP address for this printer on the network. Use the , , , and keys to specify the value. If the IP address is manually specified, DHCP/BOOTP is automatically set to OFF. SUBNET MASKSetting000.000.000.000 Specify the subnet mask for the network. Use the , , , and keys to specify the value. DEFAULT GATEWAYSetting000.000.000.000 Specify the IP address of the router if one is on the network. Use the , , , and keys to specify the value. DHCPSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 71 BOOTPSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. ARP/ PINGSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. HTTP ENABLESettingsYES/NO If YES is selected, HTTP is enabled. If NO is selected, HTTP is dis- abled. FTP ENABLESettingsYES/NO If YES is selected, FTP is enabled. If NO is selected, FTP is dis- abled. TELNETSettingsENABLE/DISABLE Select whether to enable or disable Telnet transmissions. When ENABLE is selected, Telnet trans- missions are enabled. When DISABLE is selected, Telnet transmissions are disabled. BONJOUR ENABLESettingsYES/NO If YES is selected, Bonjour is enabled. If NO is selected, Bonjour is disabled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 72 DYNAMIC DNSENABLESettingsYES/NO If YES is selected, Dynamic DNS is enabled. If NO is selected, Dynamic DNS is disabled. IPP ENABLESettingsYES/NO If YES is selected, IPP is enabled. If NO is selected, IPP is dis- abled. RAW PORTENABLESettingsYES/NO If YES is selected, Raw Port is enabled. If NO is selected, Raw Port is disabled. BIDI- REC- TIONALSettingsON/OFF If ON is selected, Raw port transmissions are enabled. If OFF is selected, Raw port transmissions are disabled. SLP ENABLESettingsYES/NO If YES is selected, SLP is enabled. If NO is selected, SLP is dis- abled. SMTP ENABLESettingsYES/NO If YES is selected, SMTP is enabled. If NO is selected, SMTP is dis- abled. SNMP ENABLESettingsYES/NO If YES is selected, SNMP is enabled. If NO is selected, SNMP is disabled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 73 WSD PRINTENABLESettingsYES/NO If YES is selected, WSD print is enabled. If NO is selected, WSD print is disabled. IPSEC ENABLESettingsYES/NO If YES is selected, IPsec is enabled. If NO is selected, IPsec is dis- abled. IP ADDRESS FILTERACCESS PER- MIS- SIONSettingsENABLE/ DISABLED Select whether to enable or disable access granting. If ENABLE is selected, access granting is enabled. If DISABLE is selected, access granting is disabled. ACCESS REFUSESettingsENABLE/ DISABLED Select whether to enable or disable access blocking. If ENABLE is selected, access blocking is enabled. If DISABLE is selected, access blocking is disabled. IPv6 ENABLESettingsYES/NO If YES is selected, IPv6 is enabled. If NO is selected, IPv6 is dis- abled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 74 AUTO SET- TINGSettingsYES/NO If YES is selected, auto configuration of IPv6 is enabled. If NO is selected, auto config- uration of IPv6 is disabled. LINK LOCALDisplays the Link-Local address. GLOBAL ADDRESSDisplays the global address. GATE- WAY ADDRESSDisplays the gateway address. NETWARE ENABLESettingsYES/NO If YES is selected, NetWare is enabled. If NO is selected, NetWare is disabled. APPLE TALKENABLESettingsYES/NO If YES is selected, AppleTalk is enabled. If NO is selected, AppleTalk is disabled. SPEED/ DUPLEXSettingsAUTO/10BASE FULL/10BASE HALF/100BASE FULL/100BASE HALF/1000BASE FULL Specify the transmission speed for the network and the transmission method for bi-directional transmission. IEEE 802.1XENABLESettingsYES/NO If YES is selected, IEEE 802.1X is enabled. If NO is selected, IEEE 802.1X is dis- abled. MEMORY DIRECTSettingsENABLE/DISABLE Select whether to enable or disable memory direct printing. If ENABLE is selected, memory direct printing is enabled. If DISABLE is selected, memory direct printing is disabled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 75 CAMERA DIRECTSettingsENABLE/DISABLE Select whether to enable or disable camera direct printing. If ENABLE is selected, camera direct printing is enabled. If DISABLE is selected, camera direct printing is disabled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 76 SYS DEFAULT MENU With this menu, settings can be specified to adjust the operation of the printer, such as the display language of the message window and the time until the machine enters Energy Saver mode. LANGUAGE EMULATIONDEF. EMULATION POSTSCRIPTWAIT TIMEOUT PS ERROR PAGE PS PROTOCOL PCLCR/LF MAPPING LINES PER PAGE FONT SOURCEFONT NUMBER PITCH SIZE (POINT SIZE) SYMBOL SET PAPERDEFAULT PAPER UNIT OF MEASURE SYS DEFAULT MENU PAPER SIZE CUSTOM SIZE PAPER TYPE GRAYSCALE PAGE DO STARTUP PAGESTARTUP OPTIONS AUTO CONTINUE DIGITAL SIGNATURE XPS ERROR PAGE XPS***** Downloaded From ManualsPrinter.com Manuals