Home > Konica > Printer > Konica Minolta bizhub C20P User Manual

Konica Minolta bizhub C20P User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Konica Minolta bizhub C20P User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Configuration Menu Overview 37 PAPER MENU
    With this menu, the paper used for printing can be managed.
    PAPER TYPE
    DEFAULT TRAY
    TRAY 1PAPER SIZE
    CUSTOM SIZE*
    TRAY 2
    PAPER TYPE
    PAPER SIZE
    TRAY 3***
    PAPER SOURCE
    COLLATE****
    DUPLEX
    COPIES
    PAPER TYPE
    PAPER SIZE
    PAPER MENU
    TRAY CHAINING
    TRAY MAPPING
    LOGICAL TRAY
    0
    TRAY MAPPING
    MODE
    LOGICAL TRAY
    9
    CUSTOM SIZE**
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 38
    * This menu item appears only when you select CUSTOM from the 
    TRAY 1/PAPER SIZE menu.
    **This menu item appears only when you select 
    CUSTOM from the 
    TRAY 2/PAPER SIZE menu.
    *** This menu item appear only if the optional lower feeder unit is 
    installed.
    **** This menu item appears only if an optional hard disk kit or a Com-
    pactFlash card of 1 GB or more is installed.
    All factory default values are shown in bold.
    PAPER 
    SOURCEDEFAULT 
    TRAYSettingsTRAY1/TRAY2/TRAY3
    Select the setting for the default tray.
    TRAY 3 appears only if the optional lower 
    feeder unit is installed.
    TRAY 1 PAPER 
    SIZESettingsANY/LETTER/LEGAL/
    EXECUTIVE/A4/A5/A6/
    B5(JIS)/B6(JIS)/GOVT 
    LETTER/STATEMENT/
    FOLIO/SP FOLIO/UK 
    QUARTO/FOOLSCAP/GOVT 
    LEGAL/16K/PHOTO 4×6/
    KAI 16/KAI 32/ENV C6/
    ENV DL/ENV MONARCH/
    ENV CHOU#3/ENV 
    CHOU#4/B5(ISO)/ENV 
    #10/JPOST/JPOST-D/
    CUSTOM
    Select the setting for the size of paper 
    loaded into Tray 1.
    The default setting for North 
    America is 
    LETTER. The default 
    setting for all other regions is 
    A4.
    Depending on the setting selected 
    for 
    SYS DEFAULT MENU/
    PAPER/UNIT OF MEASURE
    , 
    PHOTO 4×6 may change to 
    PHOTO 10×15.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 39
    CUSTOM 
    SIZESpecify the paper size when custom-sized 
    paper is loaded into Tray 1.
    The setting units can be switched between 
    millimeters and inches with the 
    SYS 
    DEFAULT MENU/PAPER/UNIT OF 
    MEASURE
     setting.
    Setting range for 
    WIDTH
    „For MILLIMETERS: 92 to 216 mm
    (default)
    –North America: 216 mm
    –All other regions: 210 mm
    „For INCHES: 3.63 to 8.50 inches
    (default)
    –North America: 8.50 inches
    –All other regions: 8.26 inches
    Setting range for LENGTH
    „For MILLIMETERS: 148 to 356 mm
    (default)
    –North America: 279 mm
    –All other regions: 297 mm
    „For INCHES: 5.83 to 
    14.00 inches
    (default)
    –North America: 11.00 inches
    –All other regions: 11.69 inches
    This menu item appears only if 
    PAPER SIZE is set to CUSTOM.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 40
    PAPER 
    TYPESettingsANY/PLAIN PAPER/
    RECYCLED/THICK 1/
    THICK 2/LABEL/
    TRANSPARENCY/
    ENVELOPE/POSTCARD/
    LETTERHEAD/GLOSSY 1/
    GLOSSY 2
    Select the setting for the type of paper 
    loaded into Tray 1.
    TRAY 2 PAPER 
    SIZESettingsANY/LETTER/EXECUTIVE/
    A4/A5/A6/
    B5(JIS)/B6(JIS)/GOVT
    LETTER/STATEMENT/UK 
    QUARTO/16K/PHOTO 4×6/
    KAI 16/KAI 32/CUSTOM
    Select the setting for the size of paper 
    loaded into Tray 2.
    The default setting for North 
    America is 
    LETTER. The default 
    setting for all other regions is 
    A4.
    Depending on the setting selected
    for SYS DEFAULT MENU/
    PAPER/UNIT OF MEASURE,
    PHOTO 4×6 may change to
    PHOTO 10×15.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 41
    CUSTOM 
    SIZESpecify the paper size when custom-sized 
    paper is loaded into Tray 2.
    The setting units can be switched between 
    millimeters and inches with the 
    SYS 
    DEFAULT MENU/PAPER/UNIT OF 
    MEASURE
     setting.
    Setting range for 
    WIDTH
    „For MILLIMETERS: 92 to 216 mm
    (default)
    –North America: 216 mm
    –All other regions: 210 mm
    „For INCHES: 3.63 to 8.50 inches
    (default)
    –North America: 8.50 inches
    –All other regions: 8.26 inches
    Setting range for LENGTH
    „For MILLIMETERS: 148 to 297 mm
    (default)
    –North America: 279 mm
    –All other regions: 297 mm
    „For INCHES: 5.83 to 
    11.69 inches
    (default)
    –North America: 11.00 inches
    –All other regions: 11.69 inches
    This menu item appears only if 
    PAPER SIZE is set to CUSTOM.
    PAPER 
    TYPESettingsANY/PLAIN PAPER/
    RECYCLED
    Select the setting for the type of paper 
    loaded into Tray 2.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 42
    TRAY 3 PAPER 
    SIZEThe size of paper loaded in Tray 3 is 
    indicated.
    This menu item only shows the current 
    setting. This setting cannot be changed.
    PAPER 
    TYPESettingsANY/PLAIN PAPER/
    RECYCLED
    Select the setting for the type of paper 
    loaded into Tray 3.
    TRAY 
    CHAININGSettingsON/OFF
    If ON is selected and the specified tray runs out of 
    paper during printing, a tray loaded with paper of the 
    same size is automatically selected so printing can 
    continue.
    If 
    OFF is selected and the specified tray runs out of 
    paper, printing stops.
    TRAY 
    MAPPINGTRAY 
    MAPPING 
    MODESettingsON/OFF
    Select whether or not the Tray Mapping 
    function is used.
    LOGICAL 
    TRAY 
    0-9SettingsPHYSICAL TRAY1/
    PHYSICAL TRAY2/
    PHYSICAL TRAY3
    Select the tray that is used for printing 
    when a print job is received from another 
    manufacturer’s printer driver. 
    The default setting for 
    LOGICAL 
    TRAY 1
     is PHYSICAL TRAY1. The 
    default setting for all other trays is 
    PHYS-
    ICAL TRAY2
    .
    PHYSICAL TRAY3 appears only if 
    an optional lower feeder unit is 
    installed.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 43
    DUPLEXSettingsOFF/LONG EDGE/SHORT EDGE
    If LONG EDGE is selected, the pages will be printed on both sides 
    of the paper for long-edge binding.
    If 
    SHORT EDGE is selected, the pages will be printed on both 
    sides of the paper for short-edge binding.
    The setting specified in the printer driver will override this menu 
    setting.
    COPIESSettings1-9999
    Specify the number of copies to be printed.
    The setting specified in the printer driver will override this menu 
    setting.
    COLLATESettingsON/OFF
    If ON is selected, all pages of the document are printed before the 
    next copy is printed.
    If 
    OFF is selected, all copies of the document are not printed 
    separately.
    The setting specified in the printer driver will override this menu 
    setting.
    This menu item appears only if an optional hard disk kit or a 
    CompactFlash card of 1GB or more is installed.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 44
    QUALITY MENU
    With this menu, settings for the print quality can be specified.
    TEXT PRINTING
    COLOR MODE
    BRIGHTNESS
    HALFTONE
    QUALITY MENU
    IMAGE PRINTING
    GRAPHICS 
    PRINTING
    IMAGE PRINTING
    PCL SETTINGCONTRAST
    TEXT PRINTING
    EDGE 
    ENHANCEMENTIMAGE PRINTING
    GRAPHICS 
    PRINTING
    EDGE STRENGTH
    ECONOMY PRINT
    RGB SOURCE
    RGB INTENT
    RGB GRAY
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 45
    TEXT PRINTINGRGB SOURCE
    RGB INTENT
    RGB GRAY
    PS SETTINGIMAGE PRINTINGRGB SOURCE
    RGB INTENT
    RGB GRAY
    DESTINATION 
    PROF
    GRAPHICS 
    PRINTINGRGB SOURCE
    RGB INTENT
    RGB GRAY
    TEXT PRINTINGRGB SOURCE
    RGB INTENT
    RGB GRAY
    DESTINATION 
    PROF
    GRAPHICS 
    PRINTINGRGB SOURCE
    RGB INTENT
    RGB GRAY
    DESTINATION 
    PROF
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configuration Menu Overview 46
    All factory default values are shown in bold.
    COLOR 
    MODESettingsCOLOR/GRAYSCALE
    If COLOR is selected, the pages are printed in full color.
    If 
    GRAYSCALE is selected, the pages are printed in black 
    and white.
    BRIGHT-
    NESSSettings-15%/-10%/-5%/0%/+5%/+10%/
    +15%
    The brightness of the printed image can be adjusted.
    HALFTONE IMAGE 
    PRINTINGSettingsLINE ART/DETAIL/
    SMOOTH
    Select how halftones in images are 
    reproduced.
    If 
    LINE ART is selected, halftones are 
    reproduced with high precision.
    If 
    DETAIL is selected, halftones are 
    reproduced with detail.
    If 
    SMOOTH is selected, halftones are 
    reproduced with smoothness.
    SIMULATION PROF
    SIMULATION 
    INTENT
    CMYK GRAY
    SIMULATION
    TONE CALIBRATION
    AIDC PROCESS
    CALIBRATION
    COLOR 
    SEPARATION
    CMYK DENSITY
    BLACK
    CYAN
    MAGENTA
    YELLOW
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Konica manuals Comments (0)

    Related Manuals for Konica Minolta bizhub C20P User Manual