Konica Minolta bizhub C20P User Manual
Have a look at the manual Konica Minolta bizhub C20P User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Configuration Menu Overview 77 LCD CONTRAST SECURITYCHANGE PASSWORD LOCK PANEL CLOCKDATE (xx.xx.xx) TIME HDD FORMAT*USER AREA ONLY ALL RESTORE DEFAULTSRESTORE NETWORK RESTORE PRINTER RESTORE ALL ENERGY SAVER TIME** MENU TIMEOUT ENERGY SAVER TIME ZONE HOLD JOB TIMEOUT* CARD FOR- MAT***USER AREA ONLY ALL Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 78 * These menu items appear only if an optional hard disk kit is installed. ** This menu item appears when you select ON from the ENERGY SAVER menu. *** This menu item appears only if an optional CompactFlash card is installed. **** This menu item appears only if the optional lower feeder unit is installed. ***** This menu item appears only if an optional hard disk kit or a CompactFlash card is installed. ENABLE WARNINGPAPER EMPTYTRAY1 TRAY2 TRAY3**** TONER LOW I-UNIT LOW Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 79 All factory default values are shown in bold. LAN- GUAGESettingsENGLISH/FRENCH/GERMAN/SPANISH/ ITALIAN/PORTUGUESE/CZECH/JAPANESE/ KOREAN/SIMPLIFIED CHINESE/ TRADITIONAL CHINESE/DUTCH/RUSSIAN/ POLISH The display language of the message window can be changed to the selected language. The language selections appear in the message window in the corresponding language. For example, GERMAN appears as DEUTSCH. EMULA- TIONDEF. EMULA- TIONSettingsAUTO/POSTSCRIPT/PCL Specify the printer emulation language. If AUTO is selected, the printer automatically selects the printer emulation language from the data stream. POST- SCRIPTWAIT TIME OUTSettings0-300 Specify the time until an error is determined to be a PostScript error. If 0 is selected, no timeout is performed. PS ERROR PAGESettingsON/OFF Select whether or not an error page is printed when a Postscript error occurs. PS PROTO- COLSettingsAUTO/NORMAL/BINARY Specify the protocol for data transmissions with a PostScript data stream. If AUTO is selected, the printer automatically selects an applicable protocol from the data stream. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 80 PCL CR/LF MAP- PINGSettingsCR=CR LF=LF/CR=CRLF LF=LF/CR=CR LF=LFCR/CR=CRLF LF=LFCR Select the definitions of the CR/LF codes in the PCL language. LINES PER PAGESettings5-60-128 Specify the number of lines per page in the PCL language. FONT SOURCEFONT NUMBERSettings0-102 Specify the default font in the PCL language. The font numbers that appear correspond to the PCL font list. For details on printing the font list, refer to “PRINT MENU” on page 35. PITCH SIZE (POINT SIZE)Settings0.44-10.00- 99.99 (4.00-12.00- 999.75) Specify the font size in the PCL language. If the selected FONT NUMBER is for a bitmap font, PITCH SIZE appears. If the selected FONT NUMBER is for an outline font, POINT SIZE appears. SYMBOL SETSpecify the symbol set used with the PCL language. The default setting is PC8. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 81 XPS DIGI- TAL SIGNA- TURESettingsENABLE/DISABLE Select whether to enable or disable XPS digital signatures. If ENABLE is selected, XPS digital signatures are enabled. If DISABLE is selected, XPS digital signatures are disabled. XPS ERROR PAGESettingsON/OFF Select whether or not an error report is printed after an XPS error has occurred. If ON is selected, the error report is printed. If OFF is selected, the error report is not printed. PAPER DEFAULT PAPERPAPER SIZESettingsLETTER/LEGAL/EXECU- TIVE/A4/A5/A6/ B5(JIS)/B6(JIS)/GOVT LETTER/STATEMENT/ FOLIO/SP FOLIO/UK QUARTO/FOOLSCAP/GOVT LEGAL/16K/PHOTO 4x6/ KAI 16/KAI 32/ENV C6/ ENV DL/ENV MONARCH/ ENV CHOU#3/ENV CHOU#4/B5(ISO)/ENV #10/JPOST/JPOST-D/ CUSTOM Select the size of media that is normally used. The default setting for North America is LETTER. The default setting for all other regions is A4. Depending on the setting selected for SYS DEFAULT MENU/ PAPER/UNIT OF MEASURE , PHOTO 4×6 may change to PHOTO 10×15. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 82 CUSTOM SIZESpecify the media size when PAPER SIZE is set to CUSTOM. The setting units can be switched between millimeters and inches with the SYS DEFAULT MENU/PAPER/UNIT OF MEASURE setting. Setting range for WIDTH „For MILLIMETERS: 92 to 216 mm (default) –North America: 216 mm –All other regions: 210 mm „For INCHES: 3.63 to 8.50 inches (default) –North America: 8.50 inches –All other regions: 8.26 inches Setting range for LENGTH „For MILLIMETERS: 148 to 356 mm (default) –North America: 279 mm –All other regions: 297 mm „For INCHES: 5.83 to 14.00 inches (default) –North America: 11.00 inches –All other regions: 11.69 inches Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 83 PAPER TYPESettingsPLAIN PAPER/ RECYCLED/THICK 1/ THICK 2/LABEL/ TRANSPARENCY/ ENVELOPE/POSTCARD/ LETTERHEAD/GLOSSY 1/ GLOSSY 2 Select the type of media that is normally used. UNIT OF MEA- SURESettingsINCHES/MILLIMETERS The units for specifying the size of custom media can be switched between inches and millimeters. The default setting for North America is INCHES. The default setting for all other regions is MILLIMETERS. GRAY SCALE PAGESettingsAUTO/GRAYSCALE PRINT/COLOR PRINT Specify the operation to be performed for black-and-white pages in a job specified for color printing. If AUTO is selected, printing is automatically performed accord- ing to the first page of the job. If GRAYSCALE PRINT is selected, black-and-white printing is automatically performed depending on each page. If COLOR PRINT is selected, color printing is performed, even for a black-and-white page. STARTUP OPTIONSDO START- UP PAGESettingsON/OFF Select whether or not a startup page is printed when the printer is turned on. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 84 AUTO CON- TINUESettingsON/OFF Select whether or not printing continues if the size or type of media in the selected tray is different from the size or type of media for the print job. If AUTO CONTINUE is set to ON, printing automatically contin- ues after about 10 seconds under the following conditions. At this time, printing will be performed even if the media size is dif- ferent. No media: PAPER EMPTY (Page 211)/TRAY EMPTY (Page 213) Different media size/type: PAPER ERROR (Page 211)/TRAY x PAPER ERR (Page 213) HOLD JOB TIME OUTSettingsDISABLE/1 hour/4 hours/1 day/ 1 week Specify the length of time until print jobs saved on the hard disk are deleted. If DISABLE is selected, print jobs are not deleted at a specific time. ENERGY SAVERSettingsON/OFF If ON is selected, the machine enters Energy Saver mode according to the length of time specified for ENERGY SAVER TIME . If OFF is selected, the machine will not enter Energy Saver mode. ENERGY SAVER TIMESettings5 minutes/6 minutes/7 minutes/8 minutes/9 minutes/10 minutes/11 minutes/12 minutes/13 minutes/14 minutes/15 minutes/30 minutes/ 1 hour/3 hours Specify the length of time until the machine enters Energy Saver mode. This menu item appears only when ENERGY SAVER is set to ON. MENU TIME OUTSettingsOFF/1 minute/2 minutes Specify the length of time until the status screen is displayed when no operation is performed while a menu or help screen is displayed in the message window. If OFF is selected, no timeout occurs. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 85 LCD CON- TRASTSettings-3/-2/-1/0/+1/+2/+3 Adjust the contrast of the message window. The darkest level setting is -3 and the brightest level setting is +3. SECU- RITYCHANGE PASS- WORDSpecify the password for locking the control panel. If the password is set to 0000 (default), the control panel is not locked. In order to lock the control panel, be sure to specify a password other than 0000. LOCK PANELSettingsOFF/MINIMUM/ON Specify how the control panel is locked. If OFF is selected, the control panel is not locked. If MINIMUM is selected, the INTERFACE MENU and SYS DEFAULT MENU are protected with a password. If ON is selected, all menus are protected with a password. In order to lock the control panel, be sure to specify a password other than 0000. CLOCK DATE (xx.xx. xx) Specify the date for the printer’s internal clock. The date for Asia and China is set in the order year, month, then day ( YY.MM.DD). The date for the Americas is set in the order month, day, then year ( MM.DD.YY). The date for Europe is set in the order day, month, then year ( DD.MM.YY). TIMESpecify the time for the printer’s internal clock. TIME ZONESettings-12:00-00:00-+13:00 Specify the time zone. HDD FORMATUSER AREA ONLYInitialize the user area of the hard disk. When this menu item is selected, the printer is automatically restarted. ALLInitialize the hard disk. When this menu item is selected, the printer is automatically restarted. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 86 CARD FORMATUSER AREA ONLYInitialize the user area of the compactflash card. When this menu item is selected, the printer is automatically restarted. ALLInitialize the compactflash card. When this menu item is selected, the printer is automatically restarted. RESTORE DEFAULTSRESTORE NETWORKReset the network settings to their defaults. When this menu item is selected, the printer is automatically restarted. RESTORE PRINTERReset the printer settings to their defaults. When this menu item is selected, the printer is automatically restarted. RESTORE ALLReset all settings to their defaults. When this menu item is selected, the printer is automatically restarted. ENABLE WARNINGPAPER EMPTYTRAY1SettingsON/OFF Select whether or not a warning appears when Tray 1 runs out of media. TRAY2SettingsON/OFF Select whether or not a warning appears when Tray 2 runs out of media. TRAY3SettingsON/OFF Select whether or not a warning appears when Tray 3 runs out of media. TONER LOWSettingsON/OFF Select whether or not a warning appears when the toner is about to run out. I-UNIT LOWSettingsON/OFF Select whether or not a warning appears when the imaging unit is about to reach the end of its life. Downloaded From ManualsPrinter.com Manuals