Konica Minolta bizhub C20P User Manual
Here you can view all the pages of manual Konica Minolta bizhub C20P User Manual. The Konica manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 81
Configuration Menu Overview 67 RGB SOURCESettingsDEVICE COLOR/sRGB Specify the color space for RGB image data. If DEVICE COLOR is selected, no color space is specified. RGB INTENTSettingsVIVID/PHOTOGRAPHIC Specify the characteristic applied when converting RGB image data to CMYK data. If VIVID is selected, a vivid output is produced. If PHOTOGRAPHIC is selected, a brighter output is produced. RGB GRAYSettingsCOMPOSITE BLACK/BLACK AND GRAY/BLACK ONLY Specify how black and grays are reproduced in...
Page 82
Configuration Menu Overview 68 INTERFACE MENU With this menu, interface settings can be specified. Restart the printer after changing settings in the ETHERNET menu. SUBNET MASK* DEFAULT GATEWAY* HTTP* FTP* TCP/IPENABLE IP ADDRESS* JOB TIMEOUT ETHERNET INTERFACE MENU MEMORY DIRECT** ARP/PING* CAMERA DIRECT TELNET* BONJOUR* DYNAMIC DNS* IPP* DHCP* BOOTP* ENABLE ENABLE ENABLE ENABLE ENABLE Downloaded From ManualsPrinter.com Manuals
Page 83
Configuration Menu Overview 69 *This menu item appears when INTERFACE MENU/ETHERNET/ TCP/IP/ENABLE is set to YES. ** This menu item appears only if an optional hard disk kit or a Com- pactFlash card is installed. SNMP* WSD PRINT* IPSEC* ENABLE ENABLE SLP* SMTP* NETWARE APPLETALK SPEED/ DUPLEX IP ADDRESS FILTER* IEEE802.1X IPv6* ENABLE RAW PORT*ENABLE BIDIREC- TIONAL ENABLE ENABLE ENABLE ENABLE ENABLE ACCESS PER- MISSION ACCESS REFUSE ENABLE LINK LOKAL GLOBAL ADDRESS AUTO SETTING GATEWAY ADDRESS...
Page 84
Configuration Menu Overview 70 All factory default values are shown in bold. JOB TIME- OUTSettings5 seconds- 15 seconds-300 seconds Specify the timeout interval for a print job being received. ETHER- NETTCP/IP ENABLESettingsYES /NO If YES is selected, TCP/IP is enabled. If NO is selected, TCP/IP is disabled. IP ADDRESSSetting000.000.000.000 Set the IP address for this printer on the network. Use the , , , and keys to specify the value. If the IP address is manually specified, DHCP/BOOTP is...
Page 85
Configuration Menu Overview 71 BOOTPSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. ARP/ PINGSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. HTTP ENABLESettingsYES/NO If YES is...
Page 86
Configuration Menu Overview 72 DYNAMIC DNSENABLESettingsYES/NO If YES is selected, Dynamic DNS is enabled. If NO is selected, Dynamic DNS is disabled. IPP ENABLESettingsYES/NO If YES is selected, IPP is enabled. If NO is selected, IPP is dis- abled. RAW PORTENABLESettingsYES/NO If YES is selected, Raw Port is enabled. If NO is selected, Raw Port is disabled. BIDI- REC- TIONALSettingsON/OFF If ON is selected, Raw port transmissions are enabled. If OFF is selected, Raw port transmissions are...
Page 87
Configuration Menu Overview 73 WSD PRINTENABLESettingsYES/NO If YES is selected, WSD print is enabled. If NO is selected, WSD print is disabled. IPSEC ENABLESettingsYES/NO If YES is selected, IPsec is enabled. If NO is selected, IPsec is dis- abled. IP ADDRESS FILTERACCESS PER- MIS- SIONSettingsENABLE/ DISABLED Select whether to enable or disable access granting. If ENABLE is selected, access granting is enabled. If DISABLE is selected, access granting is disabled. ACCESS...
Page 88
Configuration Menu Overview 74 AUTO SET- TINGSettingsYES/NO If YES is selected, auto configuration of IPv6 is enabled. If NO is selected, auto config- uration of IPv6 is disabled. LINK LOCALDisplays the Link-Local address. GLOBAL ADDRESSDisplays the global address. GATE- WAY ADDRESSDisplays the gateway address. NETWARE ENABLESettingsYES/NO If YES is selected, NetWare is enabled. If NO is selected, NetWare is disabled. APPLE TALKENABLESettingsYES/NO If YES is selected, AppleTalk is enabled. If...
Page 89
Configuration Menu Overview 75 CAMERA DIRECTSettingsENABLE/DISABLE Select whether to enable or disable camera direct printing. If ENABLE is selected, camera direct printing is enabled. If DISABLE is selected, camera direct printing is disabled. Downloaded From ManualsPrinter.com Manuals
Page 90
Configuration Menu Overview 76 SYS DEFAULT MENU With this menu, settings can be specified to adjust the operation of the printer, such as the display language of the message window and the time until the machine enters Energy Saver mode. LANGUAGE EMULATIONDEF. EMULATION POSTSCRIPTWAIT TIMEOUT PS ERROR PAGE PS PROTOCOL PCLCR/LF MAPPING LINES PER PAGE FONT SOURCEFONT NUMBER PITCH SIZE (POINT SIZE) SYMBOL SET PAPERDEFAULT PAPER UNIT OF MEASURE SYS DEFAULT MENU PAPER SIZE CUSTOM SIZE PAPER TYPE...